[ofa-general] Re: OFED 1.3 OpenSM and QoS Annex Support
Yevgeny Kliteynik
kliteyn at mellanox.co.il
Tue Mar 18 06:54:02 PDT 2008
Hi Hal,
>> Any firmware release ? The OpenSM release
>> notes mention 0.5.0 or later.
HCAs: QoS supported by ConnectX. The latest FW release
doesn't support QoS. QoS-enabled FW release (2_5_000) is
planned for May. If someone wishes to get QoS-enabled FW
before the official release, he should contact Mellanox FAE.
Switches: QoS supported by InfiniScale III
Any InfiniScale III FW that is supported by OpenSM supports QoS.
Regards,
Yevgeny Kliteynik
Mellanox Technologies LTD
Tel: +972-4-909-7200 ext: 394
Fax: +972-4-959-3245
P.O. Box 586 Yokneam 20692 ISRAEL
-----Original Message-----
From: Hal Rosenstock [mailto:hrosenstock at xsigo.com]
Sent: Tuesday, March 18, 2008 15:18
To: tziporet at dev.mellanox.co.il
Cc: Yevgeny Kliteynik; general at lists.openfabrics.org
Subject: Re: [ofa-general] Re: OFED 1.3 OpenSM and QoS Annex Support
Tziporet,
On Mon, 2008-03-10 at 21:52 +0200, Tziporet Koren wrote:
> Only ConnectX supports QoS
> > Any firmware release ? The OpenSM release notes mention 0.5.0 or
later.
> >
> I think any but will find out tomorrow
Were you able to find this out ? Thanks.
-- Hal
More information about the general
mailing list