[ofa-general] [PATCH] opensm/scripts: remove not used opensmd template
Sasha Khapyorsky
sashak at voltaire.com
Fri May 23 01:49:41 PDT 2008
Remove not used opensmd startup script template.
Signed-off-by: Sasha Khapyorsky <sashak at voltaire.com>
---
opensm/configure.in | 2 +-
opensm/scripts/opensmd.in | 469 ---------------------------------------------
2 files changed, 1 insertions(+), 470 deletions(-)
delete mode 100755 opensm/scripts/opensmd.in
diff --git a/opensm/configure.in b/opensm/configure.in
index 2ae8bd0..e079065 100644
--- a/opensm/configure.in
+++ b/opensm/configure.in
@@ -207,7 +207,7 @@ OPENIB_APP_OSMV_CHECK_LIB
# overrides.
CFLAGS=$ac_env_CFLAGS_value
-AC_CONFIG_FILES([man/opensm.8 scripts/opensm.init scripts/redhat-opensm.init scripts/opensmd scripts/sldd.sh])
+AC_CONFIG_FILES([man/opensm.8 scripts/opensm.init scripts/redhat-opensm.init scripts/sldd.sh])
dnl Create the following Makefiles
AC_OUTPUT([include/opensm/osm_version.h Makefile include/Makefile complib/Makefile libvendor/Makefile opensm/Makefile osmeventplugin/Makefile osmtest/Makefile opensm.spec])
diff --git a/opensm/scripts/opensmd.in b/opensm/scripts/opensmd.in
deleted file mode 100755
index 7e5d868..0000000
--- a/opensm/scripts/opensmd.in
+++ /dev/null
@@ -1,469 +0,0 @@
-#!/bin/bash
-
-#
-# Copyright (c) 2006 Mellanox Technologies. All rights reserved.
-#
-# This Software is licensed under one of the following licenses:
-#
-# 1) under the terms of the "Common Public License 1.0" a copy of which is
-# available from the Open Source Initiative, see
-# http://www.opensource.org/licenses/cpl.php.
-#
-# 2) under the terms of the "The BSD License" a copy of which is
-# available from the Open Source Initiative, see
-# http://www.opensource.org/licenses/bsd-license.php.
-#
-# 3) under the terms of the "GNU General Public License (GPL) Version 2" a
-# copy of which is available from the Open Source Initiative, see
-# http://www.opensource.org/licenses/gpl-license.php.
-#
-# Licensee has the right to choose one of the above licenses.
-#
-# Redistributions of source code must retain the above copyright
-# notice and one of the license notices.
-#
-# Redistributions in binary form must reproduce both the above copyright
-# notice, one of the license notices in the documentation
-# and/or other materials provided with the distribution.
-#
-#
-# processname: @sbindir@/opensm
-# config: @OPENSM_CONFIG_DIR@/opensm.conf
-# pidfile: /var/run/opensm.pid
-
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-CONFIG=@OPENSM_CONFIG_DIR@/opensm.conf
-
-if [ ! -f $CONFIG ]; then
- exit 0
-fi
-
-. $COFNIG
-
-prog=@sbindir@/opensm
-bin=${prog##*/}
-
-# Handover daemon for updating guid2lid cache file
-sldd_prog=@sbindir@/sldd.sh
-sldd_bin=${sldd_prog##*/}
-sldd_pid_file=/var/run/sldd.pid
-
-# Only use ONBOOT option if called by a runlevel directory.
-# Therefore determine the base, follow a runlevel link name ...
-base=${0##*/}
-link=${base#*[SK][0-9][0-9]}
-# ... and compare them
-if [ $link == $base ] ; then
- ONBOOT=yes
-fi
-
-ACTION=$1
-shift
-
-if [ ! -x $prog ]; then
- echo "OpenSM not installed"
- exit 1
-fi
-
-# Check if OpenSM configured to start automatically
-if [[ -z $ONBOOT || "$ONBOOT" != "yes" ]]; then
- exit 0
-fi
-
-if ( grep -i 'SuSE Linux' /etc/issue >/dev/null 2>&1 ); then
- if [ -n "$INIT_VERSION" ] ; then
- # MODE=onboot
- if LANG=C egrep -L "^ONBOOT=['\"]?[Nn][Oo]['\"]?" ${CONFIG} > /dev/null ; then
- exit 0
- fi
- fi
-fi
-
-if [ -f /etc/init.d/functions ]; then
- . /etc/init.d/functions
-fi
-
-# Setting OpenSM start parameters
-PID_FILE=/var/run/${bin}.pid
-touch $PID_FILE
-
-if [[ -z $DEBUG || "$DEBUG" == "none" ]]; then
- DEBUG_FLAG=""
-else
- DEBUG_FLAG="-d ${DEBUG}"
-fi
-
-if [[ -z $LMC || "$LMC" == "0" ]]; then
- LMC_FLAG=""
-else
- LMC_FLAG="-l ${LMC}"
-fi
-
-if [[ -z $MAXSMPS || "$MAXSMPS" == "4" ]]; then
- MAXSMPS_FLAG=""
-else
- MAXSMPS_FLAG="-maxsmps ${MAXSMPS}"
-fi
-
-if [[ -z $REASSIGN_LIDS || "$REASSIGN_LIDS" == "no" ]]; then
- REASSIGN_LIDS_FLAG=""
-else
- REASSIGN_LIDS_FLAG="-r"
-fi
-
-if [[ -z $SWEEP || "$SWEEP" == "10" ]]; then
- SWEEP_FLAG=""
-else
- SWEEP_FLAG="-s ${SWEEP}"
-fi
-
-if [[ -z $TIMEOUT || "$TIMEOUT" == "100" ]]; then
- TIMEOUT_FLAG=""
-else
- TIMEOUT_FLAG="-t ${TIMEOUT}"
-fi
-
-if [[ -z $OSM_LOG || "$OSM_LOG" == "/var/log/opensm.log" ]]; then
- OSM_LOG_FLAG=""
-else
- OSM_LOG_FLAG="-f ${OSM_LOG}"
-fi
-
-if [[ -z $VERBOSE || "$VERBOSE" == "none" ]]; then
- VERBOSE_FLAG=""
-else
- VERBOSE_FLAG="${VERBOSE}"
-fi
-
-if [[ -z $UPDN || "$UPDN" == "off" ]]; then
- UPDN_FLAG=""
-else
- UPDN_FLAG="-u"
-fi
-
-if [[ -z $GUID_FILE || "$GUID_FILE" == "none" ]]; then
- GUID_FILE_FLAG=""
-else
- GUID_FILE_FLAG="-a ${GUID_FILE}"
-fi
-
-if [[ -z $GUID || "$GUID" == "none" ]]; then
- GUID_FLAG=""
-else
- GUID_FLAG="-g ${GUID}"
-fi
-
-if [[ -z $HONORE_GUID2LID || "$HONORE_GUID2LID" == "none" ]]; then
- HONORE_GUID2LID_FLAG=""
-else
- HONORE_GUID2LID_FLAG="--honor_guid2lid"
-fi
-
-if [[ -n "${OSM_HOSTS}" && $(echo -n ${OSM_HOSTS} | wc -w | tr -d '[:space:]') -gt 1 ]]; then
- HONORE_GUID2LID_FLAG="--honor_guid2lid"
-fi
-
-
-if [[ -z $CACHE_OPTIONS || "$CACHE_OPTIONS" == "none" ]]; then
- CACHE_OPTIONS_FLAG=""
-else
- CACHE_OPTIONS_FLAG="--cache-options"
-fi
-
-
-if [ -z $PORT_NUM ]; then
- PORT_FLAG=1
-else
- PORT_FLAG="${PORT_NUM}"
-fi
-
-
-#########################################################################
-# Get a sane screen width
-[ -z "${COLUMNS:-}" ] && COLUMNS=80
-
-[ -z "${CONSOLETYPE:-}" ] && [ -x /sbin/consoletype ] && CONSOLETYPE="`/sbin/consoletype`"
-
-if [ -f /etc/sysconfig/i18n -a -z "${NOLOCALE:-}" ] ; then
- . /etc/sysconfig/i18n
- if [ "$CONSOLETYPE" != "pty" ]; then
- case "${LANG:-}" in
- ja_JP*|ko_KR*|zh_CN*|zh_TW*)
- export LC_MESSAGES=en_US
- ;;
- *)
- export LANG
- ;;
- esac
- else
- export LANG
- fi
-fi
-
-# Read in our configuration
-if [ -z "${BOOTUP:-}" ]; then
- if [ -f /etc/sysconfig/init ]; then
- . /etc/sysconfig/init
- else
- # This all seem confusing? Look in /etc/sysconfig/init,
- # or in /usr/doc/initscripts-*/sysconfig.txt
- BOOTUP=color
- RES_COL=60
- MOVE_TO_COL="echo -en \\033[${RES_COL}G"
- SETCOLOR_SUCCESS="echo -en \\033[1;32m"
- SETCOLOR_FAILURE="echo -en \\033[1;31m"
- SETCOLOR_WARNING="echo -en \\033[1;33m"
- SETCOLOR_NORMAL="echo -en \\033[0;39m"
- LOGLEVEL=1
- fi
- if [ "$CONSOLETYPE" = "serial" ]; then
- BOOTUP=serial
- MOVE_TO_COL=
- SETCOLOR_SUCCESS=
- SETCOLOR_FAILURE=
- SETCOLOR_WARNING=
- SETCOLOR_NORMAL=
- fi
-fi
-
-if [ "${BOOTUP:-}" != "verbose" ]; then
- INITLOG_ARGS="-q"
-else
- INITLOG_ARGS=
-fi
-
-echo_success() {
- echo -n $@
- [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
- echo -n "[ "
- [ "$BOOTUP" = "color" ] && $SETCOLOR_SUCCESS
- echo -n $"OK"
- [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
- echo -n " ]"
- echo -e "\r"
- return 0
-}
-
-echo_failure() {
- echo -n $@
- [ "$BOOTUP" = "color" ] && $MOVE_TO_COL
- echo -n "["
- [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
- echo -n $"FAILED"
- [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
- echo -n "]"
- echo -e "\r"
- return 1
-}
-
-
-#########################################################################
-
-# Check if $pid (could be plural) are running
-checkpid() {
- local i
-
- for i in $* ; do
- [ -d "/proc/$i" ] || return 1
- done
- return 0
-}
-
-start_sldd()
-{
- if [ -f $sldd_pid_file ]; then
- local line p
- read line < $sldd_pid_file
- for p in $line ; do
- [ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && sldd_pid="$sldd_pid $p"
- done
- fi
-
- if [ -z "$sldd_pid" ]; then
- sldd_pid=`pidof -x $sldd_bin`
- fi
-
- if [ -n "${sldd_pid:-}" ] ; then
- kill -9 ${sldd_pid} > /dev/null 2>&1
- fi
-
- $sldd_prog > /dev/null 2>&1 &
- sldd_pid=$!
-
- echo ${sldd_pid} > $sldd_pid_file
- # Sleep is needed in order to update local gid2lid cache file before running opensm
- sleep 3
-}
-
-stop_sldd()
-{
- if [ -f $sldd_pid_file ]; then
- local line p
- read line < $sldd_pid_file
- for p in $line ; do
- [ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && sldd_pid="$sldd_pid $p"
- done
- fi
-
- if [ -z "$sldd_pid" ]; then
- sldd_pid=`pidof -x $sldd_bin`
- fi
-
- if [ -n "${sldd_pid:-}" ] ; then
- kill -15 ${sldd_pid} > /dev/null 2>&1
- fi
-
-}
-
-start()
-{
- if [ ! -d /sys/class/infiniband ]; then
- echo
- echo "Please load Infiniband driver first"
- echo
- return 2
- fi
-
- local OSM_PID=
-
- if [ -f $PID_FILE ]; then
- local line p
- read line < $PID_FILE
- for p in $line ; do
- [ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && pid="$pid $p"
- done
- fi
-
- if [ -z "$pid" ]; then
- pid=`pidof -o $$ -o $PPID -o %PPID -x $bin`
- fi
-
- if [ -n "${pid:-}" ] ; then
- echo $"${bin} (pid $pid) is already running..."
- else
-
- if [ -n "${HONORE_GUID2LID_FLAG}" ]; then
- # Run sldd daemod
- start_sldd
- fi
-
- # Start opensm
- local START_FLAGS=""
- for flag in "$DEBUG_FLAG" "$LMC_FLAG" "$MAXSMPS_FLAG" "$REASSIGN_LIDS_FLAG" "$SWEEP_FLAG" "$TIMEOUT_FLAG" "$OSM_LOG_FLAG" "$VERBOSE_FLAG" "$UPDN_FLAG" "$GUID_FILE_FLAG" "$GUID_FLAG" "$HONORE_GUID2LID_FLAG" "$CACHE_OPTIONS_FLAG"
- do
- [ ! -z "$flag" ] && START_FLAGS="$START_FLAGS $flag"
- done
-
- echo $PORT_FLAG | $prog $START_FLAGS > /dev/null 2>&1 &
- OSM_PID=$!
- echo $OSM_PID > $PID_FILE
- sleep 1
- checkpid $OSM_PID
- RC=$?
- [ $RC -eq 0 ] && echo_success "$bin start" || echo_failure "$bin start"
-
- fi
-return $RC
-}
-
-stop()
-{
- local pid=
- local pid1=
- local pid2=
-
- # Stop sldd daemon
- stop_sldd
-
- if [ -f $PID_FILE ]; then
- local line p
- read line < $PID_FILE
- for p in $line ; do
- [ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && pid1="$pid1 $p"
- done
- fi
-
- pid2=`pidof -o $$ -o $PPID -o %PPID -x $bin`
-
- pid=`echo "$pid1 $pid2" | sed -e 's/\ /\n/g' | sort -n | uniq | sed -e 's/\n/\ /g'`
-
- if [ -n "${pid:-}" ] ; then
- # Kill opensm
- kill -15 $pid > /dev/null 2>&1
- cnt=0
- while [ $cnt -lt 6 ]; do echo -n "."; sleep 1; let cnt++;done
-
- for p in $pid
- do
- while checkpid $p ; do
- kill -KILL $p > /dev/null 2>&1
- echo -n "."
- sleep 1
- done
- done
- echo
- checkpid $pid
- RC=$?
- [ $RC -eq 0 ] && echo_failure "$bin shutdown" || echo_success "$bin shutdown"
- RC=$((! $RC))
- else
- echo_failure "$bin shutdown"
- RC=1
- fi
-
- # Remove pid file if any.
- rm -f $PID_FILE
-return $RC
-}
-
-status()
-{
- local pid
-
- # First try "pidof"
- pid=`pidof -o $$ -o $PPID -o %PPID -x ${bin}`
- if [ -n "$pid" ]; then
- echo $"${bin} (pid $pid) is running..."
- return 0
- fi
-
- # Next try "/var/run/opensm.pid" files
- if [ -f $PID_FILE ] ; then
- read pid < $PID_FILE
- if [ -n "$pid" ]; then
- echo $"${bin} dead but pid file $PID_FILE exists"
- return 1
- fi
- fi
- echo $"${bin} is stopped"
- return 3
-}
-
-
-
-case $ACTION in
- start)
- start
- ;;
- stop)
- stop
- ;;
- restart)
- stop
- start
- ;;
- status)
- status
- ;;
- *)
- echo
- echo "Usage: `basename $0` {start|stop|restart|status}"
- echo
- exit 1
- ;;
-esac
-
-RC=$?
-exit $RC
--
1.5.5.1.178.g1f811
More information about the general
mailing list