[ofa-general] [PATCH 1/2] fix default configuration files path

[Doron Shoham]

Hal Rosenstock wrote:
> On Thu, Nov 6, 2008 at 4:48 AM, Doron Shoham <dorons at voltaire.com> wrote:
>> fix default configuration files path in QoS_management_in_OpenSM.txt file
>> from /usr/local/etc/opensm/ to /etc/opensm/
>>
>> Signed-off-by: Doron Shoham <dorons at voltaire.com>
>> ---
>>  opensm/doc/QoS_management_in_OpenSM.txt |    6 +++---
>>  1 files changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/opensm/doc/QoS_management_in_OpenSM.txt b/opensm/doc/QoS_management_in_OpenSM.txt
>> index ba1b4b1..1a48b1a 100644
>> --- a/opensm/doc/QoS_management_in_OpenSM.txt
>> +++ b/opensm/doc/QoS_management_in_OpenSM.txt
>> @@ -20,7 +20,7 @@
>>
>>  When QoS in OpenSM is enabled (-Q or --qos), OpenSM looks for QoS Policy file.
>>  The default name of OpenSM QoS policy file is
>> -/usr/local/etc/opensm/qos-policy.conf. The default may be changed by using -Y
>> +/etc/opensm/qos-policy.conf. The default may be changed by using -Y
>>  or --qos_policy_file option with OpenSM.
>>
>>  During fabric initialization and at every heavy sweep OpenSM parses the QoS
>> @@ -67,7 +67,7 @@ This section describes how to set up SL2VL and VL Arbitration tables on
>>  various nodes in the fabric.
>>  However, this is not supported in OpenSM currently.
>>  SL2VL and VLArb tables should be configured in the OpenSM options file
>> -(default location - /usr/local/etc/opensm/opensm.conf).
>> +(default location - /etc/opensm/opensm.conf).
> 
> If this needs changing, aren't there similar changes needed in the
> opensm man page ?
> 
> -- Hal
> 

No,
in the man page:
/etc/opensm/qos-policy.conf
	default QOS policy config file



>>  III) QoS Levels (denoted by qos-levels).
>>  Each QoS Level defines Service Level (SL) and a few optional fields:
>> @@ -205,7 +205,7 @@ policy file and their syntax:
>>         # Arbitration tables on various nodes in the fabric.
>>         # However, this is not supported in OpenSM currently - the section is
>>         # parsed and ignored. SL2VL and VLArb tables should be configured in the
>> -        # OpenSM options file (by default - /usr/local/etc/opensm/opensm.conf).
>> +        # OpenSM options file (by default - /etc/opensm/opensm.conf).
>>     end-qos-setup
>>
>>     qos-levels
>> --
>> 1.5.3.8
>>
>> _______________________________________________
>> general mailing list
>> general at lists.openfabrics.org
>> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>>
>> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
>>