[ewg] RE: [ofa-general] OFED 1.4-RC1 is available
Dhabaleswar Panda
panda at cse.ohio-state.edu
Wed Sep 10 15:24:46 PDT 2008
> So I can have mpirun_rsh *or* mpiexec, but not both?
Our goal is to provide both. However, it will take us some time to make
the necessary changes to the SRPM creation process and test it. For
tomorrow's SRPM version, we will provide the option for having one of
these two. By next week, we will have an SRPM update to have both.
Will that work out?
Thanks,
DK
> Scott
>
>
>
> > -----Original Message-----
> > From: Dhabaleswar Panda [mailto:panda at cse.ohio-state.edu]
> > Sent: Wednesday, September 10, 2008 3:15 PM
> > To: Scott Weitzenkamp (sweitzen)
> > Cc: Jonathan Perkins; ewg at lists.openfabrics.org;
> > general at lists.openfabrics.org; Dhabaleswar Panda
> > Subject: RE: [ewg] RE: [ofa-general] OFED 1.4-RC1 is available
> >
> > Hi Scott,
> >
> > Thanks for your note. Starting with MVAPICH2 1.2, a new scalable
> > mpirun_rsh job start-up framework (similar to the one used in
> > MVAPICH) has
> > been introduced. This allows MVAPICH2 to start on multi-thousand core
> > clusters with very little time (like MVAPICH). It also allows
> > job start-up
> > scheme to be uniform across MVAPICH and MVAPICH2. The traditional
> > MPD/mpiexec job start-up option is still there. In the latest
> > MVAPICH2 1.2
> > SRPM (1.2rc2-4), the default has been set for the new
> > scalable start-up
> > scheme. That's why you are not able to have it built with
> > mpiexec. Since
> > Jonathan is updating the SRPM to take care of the multiple compilers
> > errors (you reported yesterday), we will also include an
> > option to have
> > either of these two job start-up schemes (A. the new scalable
> > mpirun_rsh
> > framework or B. the traditional MPD-based framework)
> > installed. The new
> > SRPM to be uploaded by tomorrow will have all these fixes.
> >
> > Let us know if this will work out for you.
> >
> > Thanks,
> >
> > DK
> >
> > On Wed, 10 Sep 2008, Scott Weitzenkamp (sweitzen) wrote:
> >
> > > I'm also not getting mpiexec built, at least on the first
> > distro I tried
> > > (RHEL4 x86_64):
> > >
> > > # rpm -qlip mvapich2_gcc-1.2rc2-4.x86_64.rpm | fgrep mpiexec
> > > /usr/mpi/gcc/mvapich2-1.2rc2/bin/mpiexec.mpd
> > >
> > > Scott
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: Jonathan Perkins [mailto:perkinjo at cse.ohio-state.edu]
> > > > Sent: Tuesday, September 09, 2008 1:25 PM
> > > > To: Scott Weitzenkamp (sweitzen)
> > > > Cc: Tziporet Koren; ewg at lists.openfabrics.org;
> > > > general at lists.openfabrics.org
> > > > Subject: Re: [ewg] RE: [ofa-general] OFED 1.4-RC1 is available
> > > >
> > > > Thanks for the note. We are taking a look at this.
> > > >
> > > > On Tue, Sep 09, 2008 at 12:52:44PM -0700, Scott Weitzenkamp
> > > > (sweitzen) wrote:
> > > > > I am unable to build MVAPICH2 for multiple compilers:
> > > > >
> > > > > Building the MVAPICH2 RPM [OFA]...
> > > > > Running rpmbuild --rebuild --define '_topdir
> > /var/tmp/OFED_topdir'
> > > > > --define 'di
> > > > > st %{nil}' --target x86_64 --define '_name mvapich2_gcc'
> > > > --define 'impl
> > > > > ofa' --d
> > > > > efine 'rdma --with-rdma=gen2' --define 'ib_include
> > > > > --with-ib-include=/usr/includ
> > > > > e' --define 'ib_libpath --with-ib-libpath=/usr/lib64' --define
> > > > > 'shared_libs 1' -
> > > > > -define 'romio 1' --define 'comp_env CC=gcc CXX=g++ F77=gfortran
> > > > > F90=gfortran' -
> > > > > -define 'auto_req 0' --define 'mpi_selector
> > /usr/bin/mpi-selector'
> > > > > --define '_pr
> > > > > efix /usr/mpi/gcc/mvapich2-1.2rc2'
> > > > > /tmp/OFED-1.4-rc1/SRPMS/mvapich2-1.2rc2-4.src
> > > > > .rpm
> > > > > Install mvapich2_gcc RPM:
> > > > > Running rpm -iv --nodeps
> > > > > /tmp/OFED-1.4-rc1/RPMS/redhat-release-4AS-4.1/x86_64/mv
> > > > > apich2_gcc-1.2rc2-4.x86_64.rpm
> > > > > Build mvapich2_pgi RPM
> > > > > Building the MVAPICH2 RPM [OFA]...
> > > > > Running rpmbuild --rebuild --define '_topdir
> > /var/tmp/OFED_topdir'
> > > > > --define 'di
> > > > > st %{nil}' --target x86_64 --define '_name mvapich2_pgi'
> > > > --define 'impl
> > > > > ofa' --d
> > > > > efine 'rdma --with-rdma=gen2' --define 'ib_include
> > > > > --with-ib-include=/usr/includ
> > > > > e' --define 'ib_libpath --with-ib-libpath=/usr/lib64' --define
> > > > > 'shared_libs 1' -
> > > > > -define 'romio 1' --define 'comp_env CC=pgcc CXX=pgCC F77=pgf77
> > > > > F90=pgf90' --def
> > > > > ine 'auto_req 0' --define 'mpi_selector
> > > > /usr/bin/mpi-selector' --define
> > > > > '_prefix
> > > > > /usr/mpi/pgi/mvapich2-1.2rc2'
> > > > > /tmp/OFED-1.4-rc1/SRPMS/mvapich2-1.2rc2-4.src.rpm
> > > > > Install mvapich2_pgi RPM:
> > > > > Running rpm -iv --nodeps
> > > > > /tmp/OFED-1.4-rc1/RPMS/redhat-release-4AS-4.1/x86_64/mv
> > > > > apich2_pgi-1.2rc2-4.x86_64.rpm
> > > > > Failed to install mvapich2_pgi RPM
> > > > > See /tmp/OFED.12539.logs/mvapich2_pgi.rpminstall.log
> > > > >
> > > > > # more /tmp/OFED.12539.logs/mvapich2_pgi.rpminstall.log
> > > > > Preparing packages for installation...
> > > > > file /etc/mpe_graphics.conf from install of
> > > > > mvapich2_pgi-1.2rc2-4 confli
> > > > > cts with file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpe_log.conf from install of
> > mvapich2_pgi-1.2rc2-4
> > > > > conflicts w
> > > > > ith file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpe_mpianim.conf from install of
> > > > mvapich2_pgi-1.2rc2-4
> > > > > conflic
> > > > > ts with file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpe_mpicheck.conf from install of
> > > > > mvapich2_pgi-1.2rc2-4 confli
> > > > > cts with file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpe_mpilog.conf from install of
> > > > mvapich2_pgi-1.2rc2-4
> > > > > conflict
> > > > > s with file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpe_mpitrace.conf from install of
> > > > > mvapich2_pgi-1.2rc2-4 confli
> > > > > cts with file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpe_nolog.conf from install of
> > > > mvapich2_pgi-1.2rc2-4
> > > > > conflicts
> > > > > with file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpicc.conf from install of
> > mvapich2_pgi-1.2rc2-4
> > > > > conflicts wit
> > > > > h file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpicxx.conf from install of
> > mvapich2_pgi-1.2rc2-4
> > > > > conflicts wi
> > > > > th file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpif77.conf from install of
> > mvapich2_pgi-1.2rc2-4
> > > > > conflicts wi
> > > > > th file from package mvapich2_gcc-1.2rc2-4
> > > > > file /etc/mpif90.conf from install of
> > mvapich2_pgi-1.2rc2-4
> > > > > conflicts wi
> > > > > th file from package mvapich2_gcc-1.2rc2-4
> > > > >
> > > > > Scott Weitzenkamp
> > > > > SQA and Release Manager
> > > > > Server Access Virtualization Business Unit
> > > > > Cisco Systems
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: general-bounces at lists.openfabrics.org
> > > > > > [mailto:general-bounces at lists.openfabrics.org] On Behalf Of
> > > > > > Tziporet Koren
> > > > > > Sent: Tuesday, September 09, 2008 8:20 AM
> > > > > > To: ewg at lists.openfabrics.org
> > > > > > Cc: general at lists.openfabrics.org
> > > > > > Subject: [ofa-general] OFED 1.4-RC1 is available
> > > > > >
> > > > > > Hi,
> > > > > > OFED 1.4-RC1 release is available on
> > > > > >
> > > >
> > http://www.openfabrics.org/downloads/OFED/ofed-1.4/OFED-1.4-rc1.tgz
> > > > > >
> > > > > > To get BUILD_ID run ofed_info
> > > > > >
> > > > > > Please report any issues in bugzilla
> > > > https://bugs.openfabrics.org/ for
> > > > > > OFED 1.4
> > > > > >
> > > > > > Tziporet & Vladimir
> > > > > >
> > > > > > ==============================================================
> > > > > > ==========
> > > > > >
> > > > > > Release information:
> > > > > > --------------------
> > > > > > Linux Operating Systems:
> > > > > > - RedHat EL4 up4: 2.6.9-42.ELsmp *
> > > > > > - RedHat EL4 up5: 2.6.9-55.ELsmp
> > > > > > - RedHat EL4 up6: 2.6.9-67.ELsmp
> > > > > > - RedHat EL4 up7: 2.6.9-78.ELsmp
> > > > > > - RedHat EL5: 2.6.18-8.el5
> > > > > > - RedHat EL5 up1: 2.6.18-53.el5
> > > > > > - RedHat EL5 up2: 2.6.18-92.el5
> > > > > > - CentOS 5.2: 2.6.18-92.el5
> > > > > > - Fedora C9: 2.6.25-14.fc9 *
> > > > > > - SLES10: 2.6.16.21-0.8-smp
> > > > > > - SLES10 SP1: 2.6.16.46-0.12-smp
> > > > > > - SLES10 SP1 up1: 2.6.16.53-0.16-smp
> > > > > > - SLES10 SP2: 2.6.16.60-0.21-smp
> > > > > > - OpenSuSE 10.3: 2.6.22.5-31 *
> > > > > > - kernel.org: 2.6.26 and 2.6.27-rc5
> > > > > >
> > > > > > * Minimal QA for these versions
> > > > > >
> > > > > > Systems:
> > > > > > * x86_64
> > > > > > * x86
> > > > > > * ia64
> > > > > > * ppc64
> > > > > >
> > > > > >
> > > > > > Main Changes from OFED 1.4-beta
> > > > > > ===============================
> > > > > > o Kernel code based on 2.6.27-rc5
> > > > > > o Added NFS-RDMA support for SLES10 SP2 and kernel
> > 2.6.26 and 27
> > > > > > o iSER backports added and its now available
> > > > > > o New MPI packages: Open MPI 1.2.7, MVAPICH 1.1 and
> > MVAPICH2 1.1
> > > > > > o New DAPL libraries
> > > > > > o 37 bugs fixed (see attached for details)
> > > > > >
> > > > > >
> > > > > > Tasks that should be completed for the RC2:
> > > > > > ===========================================
> > > > > > 1. NFS-RDMA to work on RHEL 5.1
> > > > > > 2. OSM: Cashed routing
> > > > > > 3. Cleanup compilation warning
> > > > > > 4. Bug fixes
> > > > > >
> > > > > _______________________________________________
> > > > > ewg mailing list
> > > > > ewg at lists.openfabrics.org
> > > > > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
> > > >
> > > > --
> > > > Jonathan Perkins
> > > > http://www.cse.ohio-state.edu/~perkinjo
> > > >
> > > _______________________________________________
> > > general mailing list
> > > general at lists.openfabrics.org
> > > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
> > >
> > > To unsubscribe, please visit
> > http://openib.org/mailman/listinfo/openib-general
> > >
> >
> >
>
More information about the general
mailing list