***SPAM*** Re: [ofa-general] link width problem of Qlogic 9024 unmanaged switch

[Hal Rosenstock]

On Thu, Apr 16, 2009 at 3:20 PM, Hal Rosenstock
<hal.rosenstock at gmail.com> wrote:
> On Thu, Apr 16, 2009 at 3:18 PM, Yicheng Jia <YJia at tmriusa.com> wrote:
>>
>> They both are POLLING before "reset".
>
> Then they _should_ come back to INIT.
>
> What does the local LDDS value say after reset ? Any way to get the
> switch port LDDS value ?

Are you resetting the switch from the peer HCA port or some other port
? That's what Nicolas asked but I might have missed the answer.

Also, try disable (wait) and then enable and see if that works. If I
recall correctly, you had those links which are taking a long time to
initialize. If the link stays down forever after disable, this won't
work but I want to be sure.

-- Hal

> -- Hal
>
>> Thanks!
>> Yicheng Jia
>>
>>
>>
>>
>> Hal Rosenstock <hal.rosenstock at gmail.com>
>>
>> 04/16/2009 01:53 PM
>>
>> To
>> Yicheng Jia <YJia at tmriusa.com>
>> cc
>> Nicolas Morey-Chaisemartin <devel-ofed at morey-chaisemartin.com>,
>> general at lists.openfabrics.org
>> Subject
>> Re: [ofa-general] link width problem of Qlogic 9024 unmanaged switch
>>
>>
>>
>>
>> On Thu, Apr 16, 2009 at 11:12 AM, Yicheng Jia <YJia at tmriusa.com> wrote:
>>>
>>> Hi Nicolas,
>>>
>>> After this "reset" command, both ports are DOWN forever, I can only get
>>> portinfo from local port.
>>>
>>> I am sure that the port that has been reset is not the local port,
>>> otherwise
>>> it will prompt "node type not switch" error.
>>>
>>> I tried to enable this switch port from another port and brought it to
>>> POLLING state, but as long as I use "reset", both ports are DOWN.
>>
>> What are the peer port's LinkDownDefaultStates ? Sounds like one or
>> more must be Sleeping rather than Polling for some reason.
>>
>> -- Hal
>>
>>> Thanks!
>>>
>>> Yicheng Jia
>>>
>>>
>>>
>>>
>>> Nicolas Morey-Chaisemartin <devel-ofed at morey-chaisemartin.com>
>>>
>>> 04/16/2009 12:43 AM
>>>
>>> To
>>> Yicheng Jia <YJia at tmriusa.com>
>>> cc
>>> general at lists.openfabrics.org
>>> Subject
>>> Re: [ofa-general] link width problem of Qlogic 9024 unmanaged switch
>>>
>>>
>>>
>>>
>>> By any chances have you not reset the port you're on?
>>> Have you tried using another node to enable the port again?
>>>
>>> Nicolas
>>>
>>> Le 16/04/2009 00:45, Yicheng Jia a écrit :
>>>>
>>>> Hello Randy,
>>>>
>>>> I am trying to run "ibportstate reset" to reset the switch port on the
>>>> other side in order to get 4x link. However I get the following error:
>>>> ibwarn: [19660] mad_rpc: _do_madrpc failed; dport (Lid 7)
>>>> ibportstate: iberror: failed: smp set portinfo failed
>>>>
>>>> And the port status change to DOWN after this. Have you ever tried to
>>>> run "ibportstate" to reset the switch port?
>>>>
>>>> Thanks!
>>>>
>>>> Yicheng Jia
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> Message: 2
>>>> Date: Wed, 4 Mar 2009 18:39:54 -0600
>>>> From: Randy Halverson <randy.halverson at qlogic.com>
>>>> Subject: [ofa-general] link width problem of Qlogic 9024 unmanaged
>>>> switch
>>>> To: "'general at lists.openfabrics.org'" <general at lists.openfabrics.org>
>>>> Message-ID:
>>>> <88EC963376E93B4DB0F2A69D932F786903D89CAF at MNEXMB2.qlogic.org>
>>>> Content-Type: text/plain; charset="us-ascii"
>>>>
>>>> Hello Yicheng,
>>>>
>>>> After checking internally, this appears to be a known problem with older
>>>> firmware for the 9024FC switches.
>>>>
>>>> It appears that you or another person at 'tmriusa.com' has recently
>>>> opened a case with QLogic Tech Support for this issue. Please continue
>>>> to work with QLogic Tech Support on firmware upgrade resolution since
>>>> you probably don't have our FastFabric Tools to manage the 9024FC
>>>> switches..
>>>>
>>>> Regards,
>>>>
>>>> Randy
>>>> Technical Support
>>>> QLogic Corporation
>>>> -------------- next part --------------
>>>>
>>>>
>>>>
>>>>
>>>> _____________________________________________________________________________
>>>> Scanned by IBM Email Security Management Services powered by
>>>> MessageLabs. For more information please visit http://www.ers.ibm.com
>>>>
>>>>
>>>> _____________________________________________________________________________
>>>> <http://www.ers.ibm.com/>
>>>>
>>>>
>>>>
>>>> _____________________________________________________________________________
>>>> Scanned by IBM Email Security Management Services powered by
>>>> MessageLabs. For more information please visit http://www.ers.ibm.com
>>>>
>>>>
>>>> _____________________________________________________________________________
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>> _______________________________________________
>>>> general mailing list
>>>> general at lists.openfabrics.org
>>>> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>>>>
>>>> To unsubscribe, please visit
>>>> http://openib.org/mailman/listinfo/openib-general
>>>
>>>
>>>
>>> _____________________________________________________________________________
>>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>>> For more information please visit http://www.ers.ibm.com
>>>
>>> _____________________________________________________________________________
>>>
>>>
>>>
>>> _____________________________________________________________________________
>>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>>> For more information please visit http://www.ers.ibm.com
>>>
>>> _____________________________________________________________________________
>>>
>>> _______________________________________________
>>> general mailing list
>>> general at lists.openfabrics.org
>>> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>>>
>>> To unsubscribe, please visit
>>> http://openib.org/mailman/listinfo/openib-general
>>>
>>
>> _____________________________________________________________________________
>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>> For more information please visit http://www.ers.ibm.com
>> _____________________________________________________________________________
>>
>>
>> _____________________________________________________________________________
>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>> For more information please visit http://www.ers.ibm.com
>> _____________________________________________________________________________
>>
>