***SPAM*** Re: [ofa-general] link width problem of Qlogic 9024 unmanaged switch

[Hal Rosenstock]

On Thu, Apr 16, 2009 at 3:47 PM, Yicheng Jia <YJia at tmriusa.com> wrote:
>
>> Are you resetting the switch from the peer HCA port or some other port
>> ? That's what Nicolas asked but I might have missed the answer.
>
> Yes, I am trying to reset from the peer HCA port. Is anything wrong with
> this?

There's a race condition here that I was asking about. If the link
initialization takes too long and doesn't complete (gets to init)
prior to the enable trying to be sent to the switch, then you could
see these results but since it's DOWN until reboot it's something
different.

>> Also, try disable (wait) and then enable and see if that works.
>
> It remains the same, the switch port is DOWN forever. No SMP massage could
> get to the switch port.

Right; in down, the SMP can't be sent.

>> If I recall correctly, you had those links which are taking a long time to
>> initialize. If the link stays down forever after disable, this won't
>> work but I want to be sure.
>
> This is seperate issue.

Since the link stays down yes. If the disable/wait/enable worked that
would've been another story.

-- Hal

> The "reset" command is tested on a single port HCA
> directly connected with Qlogic siwth. The HCA is plugged into a Linux
> machine. It is the simplest test environment.
>
> Thanks!
> Yicheng Jia
>
>
>
>
> Hal Rosenstock <hal.rosenstock at gmail.com>
>
> 04/16/2009 02:29 PM
>
> To
> Yicheng Jia <YJia at tmriusa.com>
> cc
> Nicolas Morey-Chaisemartin <devel-ofed at morey-chaisemartin.com>,
> general at lists.openfabrics.org
> Subject
> Re: [ofa-general] link width problem of Qlogic 9024 unmanaged switch
>
>
>
>
> On Thu, Apr 16, 2009 at 3:20 PM, Hal Rosenstock
> <hal.rosenstock at gmail.com> wrote:
>> On Thu, Apr 16, 2009 at 3:18 PM, Yicheng Jia <YJia at tmriusa.com> wrote:
>>>
>>> They both are POLLING before "reset".
>>
>> Then they _should_ come back to INIT.
>>
>> What does the local LDDS value say after reset ? Any way to get the
>> switch port LDDS value ?
>
> Are you resetting the switch from the peer HCA port or some other port
> ? That's what Nicolas asked but I might have missed the answer.
>
> Also, try disable (wait) and then enable and see if that works. If I
> recall correctly, you had those links which are taking a long time to
> initialize. If the link stays down forever after disable, this won't
> work but I want to be sure.
>
> -- Hal
>
>> -- Hal
>>
>>> Thanks!
>>> Yicheng Jia
>>>
>>>
>>>
>>>
>>> Hal Rosenstock <hal.rosenstock at gmail.com>
>>>
>>> 04/16/2009 01:53 PM
>>>
>>> To
>>> Yicheng Jia <YJia at tmriusa.com>
>>> cc
>>> Nicolas Morey-Chaisemartin <devel-ofed at morey-chaisemartin.com>,
>>> general at lists.openfabrics.org
>>> Subject
>>> Re: [ofa-general] link width problem of Qlogic 9024 unmanaged switch
>>>
>>>
>>>
>>>
>>> On Thu, Apr 16, 2009 at 11:12 AM, Yicheng Jia <YJia at tmriusa.com> wrote:
>>>>
>>>> Hi Nicolas,
>>>>
>>>> After this "reset" command, both ports are DOWN forever, I can only get
>>>> portinfo from local port.
>>>>
>>>> I am sure that the port that has been reset is not the local port,
>>>> otherwise
>>>> it will prompt "node type not switch" error.
>>>>
>>>> I tried to enable this switch port from another port and brought it to
>>>> POLLING state, but as long as I use "reset", both ports are DOWN.
>>>
>>> What are the peer port's LinkDownDefaultStates ? Sounds like one or
>>> more must be Sleeping rather than Polling for some reason.
>>>
>>> -- Hal
>>>
>>>> Thanks!
>>>>
>>>> Yicheng Jia
>>>>
>>>>
>>>>
>>>>
>>>> Nicolas Morey-Chaisemartin <devel-ofed at morey-chaisemartin.com>
>>>>
>>>> 04/16/2009 12:43 AM
>>>>
>>>> To
>>>> Yicheng Jia <YJia at tmriusa.com>
>>>> cc
>>>> general at lists.openfabrics.org
>>>> Subject
>>>> Re: [ofa-general] link width problem of Qlogic 9024 unmanaged switch
>>>>
>>>>
>>>>
>>>>
>>>> By any chances have you not reset the port you're on?
>>>> Have you tried using another node to enable the port again?
>>>>
>>>> Nicolas
>>>>
>>>> Le 16/04/2009 00:45, Yicheng Jia a écrit :
>>>>>
>>>>> Hello Randy,
>>>>>
>>>>> I am trying to run "ibportstate reset" to reset the switch port on the
>>>>> other side in order to get 4x link. However I get the following error:
>>>>> ibwarn: [19660] mad_rpc: _do_madrpc failed; dport (Lid 7)
>>>>> ibportstate: iberror: failed: smp set portinfo failed
>>>>>
>>>>> And the port status change to DOWN after this. Have you ever tried to
>>>>> run "ibportstate" to reset the switch port?
>>>>>
>>>>> Thanks!
>>>>>
>>>>> Yicheng Jia
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------
>>>>>
>>>>> Message: 2
>>>>> Date: Wed, 4 Mar 2009 18:39:54 -0600
>>>>> From: Randy Halverson <randy.halverson at qlogic.com>
>>>>> Subject: [ofa-general] link width problem of Qlogic 9024 unmanaged
>>>>> switch
>>>>> To: "'general at lists.openfabrics.org'" <general at lists.openfabrics.org>
>>>>> Message-ID:
>>>>> <88EC963376E93B4DB0F2A69D932F786903D89CAF at MNEXMB2.qlogic.org>
>>>>> Content-Type: text/plain; charset="us-ascii"
>>>>>
>>>>> Hello Yicheng,
>>>>>
>>>>> After checking internally, this appears to be a known problem with
>>>>> older
>>>>> firmware for the 9024FC switches.
>>>>>
>>>>> It appears that you or another person at 'tmriusa.com' has recently
>>>>> opened a case with QLogic Tech Support for this issue. Please continue
>>>>> to work with QLogic Tech Support on firmware upgrade resolution since
>>>>> you probably don't have our FastFabric Tools to manage the 9024FC
>>>>> switches..
>>>>>
>>>>> Regards,
>>>>>
>>>>> Randy
>>>>> Technical Support
>>>>> QLogic Corporation
>>>>> -------------- next part --------------
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _____________________________________________________________________________
>>>>> Scanned by IBM Email Security Management Services powered by
>>>>> MessageLabs. For more information please visit http://www.ers.ibm.com
>>>>>
>>>>>
>>>>>
>>>>> _____________________________________________________________________________
>>>>> <http://www.ers.ibm.com/>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _____________________________________________________________________________
>>>>> Scanned by IBM Email Security Management Services powered by
>>>>> MessageLabs. For more information please visit http://www.ers.ibm.com
>>>>>
>>>>>
>>>>>
>>>>> _____________________________________________________________________________
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>> _______________________________________________
>>>>> general mailing list
>>>>> general at lists.openfabrics.org
>>>>> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>>>>>
>>>>> To unsubscribe, please visit
>>>>> http://openib.org/mailman/listinfo/openib-general
>>>>
>>>>
>>>>
>>>>
>>>> _____________________________________________________________________________
>>>> Scanned by IBM Email Security Management Services powered by
>>>> MessageLabs.
>>>> For more information please visit http://www.ers.ibm.com
>>>>
>>>>
>>>> _____________________________________________________________________________
>>>>
>>>>
>>>>
>>>>
>>>> _____________________________________________________________________________
>>>> Scanned by IBM Email Security Management Services powered by
>>>> MessageLabs.
>>>> For more information please visit http://www.ers.ibm.com
>>>>
>>>>
>>>> _____________________________________________________________________________
>>>>
>>>> _______________________________________________
>>>> general mailing list
>>>> general at lists.openfabrics.org
>>>> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>>>>
>>>> To unsubscribe, please visit
>>>> http://openib.org/mailman/listinfo/openib-general
>>>>
>>>
>>>
>>> _____________________________________________________________________________
>>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>>> For more information please visit http://www.ers.ibm.com
>>>
>>> _____________________________________________________________________________
>>>
>>>
>>>
>>> _____________________________________________________________________________
>>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>>> For more information please visit http://www.ers.ibm.com
>>>
>>> _____________________________________________________________________________
>>>
>>
>
> _____________________________________________________________________________
> Scanned by IBM Email Security Management Services powered by MessageLabs.
> For more information please visit http://www.ers.ibm.com
> _____________________________________________________________________________
>
>
> _____________________________________________________________________________
> Scanned by IBM Email Security Management Services powered by MessageLabs.
> For more information please visit http://www.ers.ibm.com
> _____________________________________________________________________________
>