[ofa-general]SRP target
Celine Bourde
celine.bourde at bull.net
Tue Jan 20 09:43:14 PST 2009
I've trouble running srp tools.
I try to setup the following configuration.
The first machine,``the initiator'', has a 2-port Connectx IB card.
Each port is connected to the a second machine, ``the target'',
which has a 2-port Connectx IB card too.
+-----------------+ +---------------+
| |- - - - - - - - - - -| |
| initiator | | target |
| |- - - - - - - - - - -| |
+-----------------+ +---------------+
the ibstat utility shows that both link are up.
My goal is to setup a failover connection. On the target machine,
both ports expose the the same storage device.
on my "target machine", I see 2 targets :
# cat /sys/class/infiniband_srpt/srpt-mlx4_0/login_info
tid_ext=0002c90300001d2c,ioc_guid=0002c90300001d2c,pkey=ffff,dgid=fe800000000000000002c90300001d2d,service_id=0002c90300001d2c
tid_ext=0002c90300001d2c,ioc_guid=0002c90300001d2c,pkey=ffff,dgid=fe800000000000000002c90300001d2e,service_id=0002c90300001d2c
But when I launch ibsrpdm -c on "initiator machine", the tool
discovers only one
target corresponding to the first port of my distant HCA card.
# ibsrpdm -c
id_ext=0002c90300001d2c,ioc_guid=0002c90300001d2c,dgid=fe800000000000000002c90300001d2d,pkey=ffff,service_id=0002c90300001d2c
# srp_daemon
IO Unit Info:
port LID: 0002
port GID: fe800000000000000002c90300001d2d
change ID: 0100
max controllers: 0x10
controller[ 1]
GUID: 0002c90300001d2c
vendor ID: 000002
device ID: 00634a
IO class : 0100
ID: Mellanox OFED SRP target
service entries: 1
service[ 0]: 0002c90300001d2c / SRP.T10:0002c90300001d2c
so i see only one of the targets; any hints why i don't see both
targets?
Thanks,
CĂ©line Bourde.
More information about the general
mailing list