[ofa-general] Re: [PATCH v3] libibmad: Handle MAD redirection
Hal Rosenstock
hal.rosenstock at gmail.com
Wed Jul 1 06:59:41 PDT 2009
On Wed, Jul 1, 2009 at 9:34 AM, Joachim Fenkes<fenkes at de.ibm.com> wrote:
> Previously, libibmad reacted to GSI MAD responses with a "redirect" status
> by throwing an error. IBM eHCA adapters use redirection, so most
> infiniband_diags tools didn't work against eHCA.
>
> Fix: Modify mad_rpc() so that it resends the request to the redirection
> target if a "redirect" GS response is received. This is repeated until no
> "redirect" response is received, allowing for multiple levels of
> indirection.
>
> The dport argument is updated with the redirection target, so subsequent
> MADs will not go through the redirection process again but reach the target
> directly.
>
> Tested using perfquery between ehca, mlx4 and mthca in all possible
> combinations.
>
> Signed-off-by: Joachim Fenkes <fenkes at de.ibm.com>
> ---
>
> Hi, Hal and Jason,
>
> here's an updated patch that will bail on GID-routed redirection. Also, I
> moved the redirection itself into its own function so it can easily be
> included into RMPP as well.
>
> Of course, I tested this again using ehca, mthca and mlx4.
>
> If you have nothing to add to this patch, please queue it for OFED 1.5.
>
> Thanks and regards,
> Joachim
>
>
> libibmad/include/infiniband/mad.h | 9 +++++
> libibmad/src/gs.c | 6 ++-
> libibmad/src/rpc.c | 65 ++++++++++++++++++++++++++++--------
> 3 files changed, 63 insertions(+), 17 deletions(-)
>
> diff --git a/libibmad/include/infiniband/mad.h b/libibmad/include/infiniband/mad.h
> index aa27eb5..bdf5158 100644
> --- a/libibmad/include/infiniband/mad.h
> +++ b/libibmad/include/infiniband/mad.h
> @@ -115,6 +115,8 @@ enum MAD_ATTR_ID {
>
> enum MAD_STATUS {
> IB_MAD_STS_OK = (0 << 2),
> + IB_MAD_STS_BUSY = (1 << 0),
> + IB_MAD_STS_REDIRECT = (1 << 1),
> IB_MAD_STS_BAD_BASE_VER_OR_CLASS = (1 << 2),
> IB_MAD_STS_METHOD_NOT_SUPPORTED = (2 << 2),
> IB_MAD_STS_METHOD_ATTR_NOT_SUPPORTED = (3 << 2),
> @@ -783,8 +785,15 @@ MAD_EXPORT int madrpc_set_timeout(int timeout);
> MAD_EXPORT struct ibmad_port *mad_rpc_open_port(char *dev_name, int dev_port,
> int *mgmt_classes, int num_classes);
> MAD_EXPORT void mad_rpc_close_port(struct ibmad_port *srcport);
> +
> +/*
> + * On redirection, the dport argument is updated with the redirection target,
> + * so subsequent MADs will not go through the redirection process again but
> + * reach the target directly.
> + */
> MAD_EXPORT void *mad_rpc(const struct ibmad_port *srcport, ib_rpc_t * rpc,
> ib_portid_t * dport, void *payload, void *rcvdata);
> +
> MAD_EXPORT void *mad_rpc_rmpp(const struct ibmad_port *srcport, ib_rpc_t * rpc,
> ib_portid_t * dport, ib_rmpp_hdr_t * rmpp,
> void *data);
> diff --git a/libibmad/src/gs.c b/libibmad/src/gs.c
> index f3d245e..c7e4ff6 100644
> --- a/libibmad/src/gs.c
> +++ b/libibmad/src/gs.c
> @@ -70,7 +70,8 @@ uint8_t *pma_query_via(void *rcvbuf, ib_portid_t * dest, int port,
> rpc.datasz = IB_PC_DATA_SZ;
> rpc.dataoffs = IB_PC_DATA_OFFS;
>
> - dest->qp = 1;
> + if (!dest->qp)
> + dest->qp = 1;
> if (!dest->qkey)
> dest->qkey = IB_DEFAULT_QP1_QKEY;
>
> @@ -109,7 +110,8 @@ uint8_t *performance_reset_via(void *rcvbuf, ib_portid_t * dest,
> rpc.timeout = timeout;
> rpc.datasz = IB_PC_DATA_SZ;
> rpc.dataoffs = IB_PC_DATA_OFFS;
> - dest->qp = 1;
> + if (!dest->qp)
> + dest->qp = 1;
> if (!dest->qkey)
> dest->qkey = IB_DEFAULT_QP1_QKEY;
>
> diff --git a/libibmad/src/rpc.c b/libibmad/src/rpc.c
> index 07b623d..7364940 100644
> --- a/libibmad/src/rpc.c
> +++ b/libibmad/src/rpc.c
> @@ -183,33 +183,68 @@ _do_madrpc(int port_id, void *sndbuf, void *rcvbuf, int agentid, int len,
> return -1;
> }
>
> +static int redirect_port(ib_portid_t *port, uint8_t *mad)
> +{
> + port->lid = mad_get_field(mad, 64, IB_CPI_REDIRECT_LID_F);
> + if (!port->lid) {
> + IBWARN("GID-based redirection is not supported");
> + return -1;
> + }
Sorry for the confusion: determination of GID redirection should be
based on a comparison of the RedirectGID to 0. It's valid to supply
both a non zero RedirectGID and RedirectLID.
> +
> + port->qp = mad_get_field(mad, 64, IB_CPI_REDIRECT_QP_F);
> + port->qkey = mad_get_field(mad, 64, IB_CPI_REDIRECT_QKEY_F);
> + port->sl = mad_get_field(mad, 64, IB_CPI_REDIRECT_SL_F);
> +
> + /* TODO: Reverse map redirection P_Key to P_Key index */
> +
> + if (ibdebug)
> + IBWARN("redirected to lid 0x%x, qp 0x%x, qkey 0x%x, sl 0x%x",
> + port->lid, port->qp, port->qkey, port->sl);
Unicast LIDs should be displayed in decimal rather than hex.
-- Hal
> +
> + return 0;
> +}
> +
> void *mad_rpc(const struct ibmad_port *port, ib_rpc_t * rpc,
> ib_portid_t * dport, void *payload, void *rcvdata)
> {
> int status, len;
> uint8_t sndbuf[1024], rcvbuf[1024], *mad;
> int timeout, retries;
> + int redirect = 1;
>
> - len = 0;
> - memset(sndbuf, 0, umad_size() + IB_MAD_SIZE);
> + while (redirect) {
> + len = 0;
> + memset(sndbuf, 0, umad_size() + IB_MAD_SIZE);
>
> - if ((len = mad_build_pkt(sndbuf, rpc, dport, 0, payload)) < 0)
> - return 0;
> + if ((len = mad_build_pkt(sndbuf, rpc, dport, 0, payload)) < 0)
> + return 0;
>
> - timeout = rpc->timeout ? rpc->timeout :
> - port->timeout ? port->timeout : madrpc_timeout;
> - retries = port->retries ? port->retries : madrpc_retries;
> + timeout = rpc->timeout ? rpc->timeout :
> + port->timeout ? port->timeout : madrpc_timeout;
> + retries = port->retries ? port->retries : madrpc_retries;
>
> - if ((len = _do_madrpc(port->port_id, sndbuf, rcvbuf,
> - port->class_agents[rpc->mgtclass],
> - len, timeout, retries)) < 0) {
> - IBWARN("_do_madrpc failed; dport (%s)", portid2str(dport));
> - return 0;
> - }
> + if ((len = _do_madrpc(port->port_id, sndbuf, rcvbuf,
> + port->class_agents[rpc->mgtclass],
> + len, timeout, retries)) < 0) {
> + IBWARN("_do_madrpc failed; dport (%s)", portid2str(dport));
> + return 0;
> + }
>
> - mad = umad_get_mad(rcvbuf);
> + mad = umad_get_mad(rcvbuf);
> + status = mad_get_field(mad, 0, IB_DRSMP_STATUS_F);
> +
> + /* check for exact match instead of only the redirect bit;
> + * that way, weird statuses cause an error, too */
> + if (status == IB_MAD_STS_REDIRECT) {
> + /* update dport for next request and retry */
> + /* bail if redirection fails */
> + if (redirect_port(dport, mad))
> + redirect = 0;
> + } else
> + redirect = 0;
> + }
>
> - if ((status = mad_get_field(mad, 0, IB_DRSMP_STATUS_F)) != 0) {
> + if (status != 0) {
> ERRS("MAD completed with error status 0x%x; dport (%s)",
> status, portid2str(dport));
> return 0;
> --
> 1.5.5
>
>
>
>
More information about the general
mailing list