[ofa-general] How does ib_srpt decide which ports to use?

[Karun Sharma (Contractor - GS Labs)]

By default, ibsrpdm will use umad0. To discover the target using umad1, use "ibsrpdm -d /dev/umad1"

Regards
Karun

-----Original Message-----
From: general-bounces at lists.openfabrics.org [mailto:general-bounces at lists.openfabrics.org] On Behalf Of Chris Worley
Sent: Saturday, June 06, 2009 4:46 AM
To: OpenIB; scst-devel
Subject: [ofa-general] How does ib_srpt decide which ports to use?

Setup: 1.4.1 w/ 3 dual-port QDR cards in each of two hosts, all ports
direct connected, opensm running on all port GUIDs from one host, all
links active.

Problem: ibsrpdm only advertises the first port of the first HCA of the target.
Next problem: I can add targets via
/sys/class/infiniband_srp/srp-*/add_target on the initiator, but only
when naming the two port guids of the first HCA on the target.  In
testing, both ports are used.

Can somebody aim me in the right direction of what/who's stopping
after the first HCA?

Thanks,

Chris
_______________________________________________
general mailing list
general at lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general

To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general