***SPAM*** Re: [ofa-general] OpenSM initialization error

[Hal Rosenstock]

On Thu, Mar 26, 2009 at 12:01 PM, Yicheng Jia <YJia at tmriusa.com> wrote:
>
> LID 1 is the node that OpenSM runs on. Cisco SFS7000P is managed switch, SM
> is running all the time.

You shouldn't be running different flavor SMs on the same subnet.

> This occurs during the system starts up. At first Mthca driver 1.3 starts on
> all nodes, after the driver is up, the OpenSM starts on one node, then the
> error shows up. It also occurs on Qlogic unmanaged switch.

Are you sure there's no SM running here other than OpenSM ?

-- Hal

> Is this related to hardware?

> Thanks!
>
> Yicheng Jia
>
>
>
>
> Hal Rosenstock <hal.rosenstock at gmail.com>
>
> 03/26/2009 10:32 AM
>
> To
> Yicheng Jia <YJia at tmriusa.com>
> cc
> general at lists.openfabrics.org, hnrose at comcast.net
> Subject
> Re: [ofa-general] OpenSM initialization error
>
>
>
>
> On Thu, Mar 26, 2009 at 11:16 AM, Yicheng Jia <YJia at tmriusa.com> wrote:
>>
>> Hi Hal,
>>
>>> What is your topology ?
>>
>> Several nodes directly connect to the switch.
>>
>>> Does this message persist or go away in the log ?
>>
>> It continues reporting this message until the subnet is up, then this
>> message goes away. It lasts about 1 minute.
>
> What is LID 1 ? Is it the switch ? Is Cisco SM running ?
>
>>> Looks to me like you are using an OpenSM 3.1.11/OFED 1.3 or older.
>>> Amongst other changes, this message has been downgraded from error to
>>> debug in more recent versions.
>>
>> Do you know what could cause the problem? Is there any way to make the
>> error
>> time shorter?
>
> What's the exact scenario under which this occurs ?
>
> -- Hal
>
>> Thanks!
>>
>> Yicheng Jia
>>
>>
>>
>>
>> Hal Rosenstock <hal.rosenstock at gmail.com>
>>
>> 03/26/2009 09:58 AM
>>
>> To
>> Yicheng Jia <YJia at tmriusa.com>
>> cc
>> hnrose at comcast.net, general at lists.openfabrics.org
>> Subject
>> Re: [ofa-general] OpenSM initialization error
>>
>>
>>
>>
>> 2009/3/25 Yicheng Jia <YJia at tmriusa.com>:
>>>
>>> Hello,
>>>
>>> I run into an initialization error during OpenSM start up. The error
>>> continues for nearly 1 minutes before the subnet is up. In the log file,
>>> it
>>> reports that "__osm_ucast_mgr_process_port: ERR 3A08: No path to get to
>>> LID
>>> 1 from switch 0x66a00d90008bb".
>>>
>>> I am using Mellanox MHES18 HCA and Cisco SFS7000P switch. Do you know
>>> what
>>> the cause is and how to avoid it?
>>
>> What is your topology ?
>>
>> Does this message persist or go away in the log ?
>>
>> Looks to me like you are using an OpenSM 3.1.11/OFED 1.3 or older.
>> Amongst other changes, this message has been downgraded from error to
>> debug in more recent versions.
>>
>> -- Hal
>>
>>>
>>> Thanks!
>>>
>>> Yicheng Jia
>>>
>>>
>>>
>>>
>>> _____________________________________________________________________________
>>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>>> For more information please visit http://www.ers.ibm.com
>>>
>>>
>>> _____________________________________________________________________________
>>>
>>> _______________________________________________
>>> general mailing list
>>> general at lists.openfabrics.org
>>> http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>>>
>>> To unsubscribe, please visit
>>> http://openib.org/mailman/listinfo/openib-general
>>>
>>
>>
>> _____________________________________________________________________________
>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>> For more information please visit http://www.ers.ibm.com
>>
>> _____________________________________________________________________________
>>
>>
>>
>> _____________________________________________________________________________
>> Scanned by IBM Email Security Management Services powered by MessageLabs.
>> For more information please visit http://www.ers.ibm.com
>>
>> _____________________________________________________________________________
>>
>
> _____________________________________________________________________________
> Scanned by IBM Email Security Management Services powered by MessageLabs.
> For more information please visit http://www.ers.ibm.com
> _____________________________________________________________________________
>
>
> _____________________________________________________________________________
> Scanned by IBM Email Security Management Services powered by MessageLabs.
> For more information please visit http://www.ers.ibm.com
> _____________________________________________________________________________
>