[Iwg-arbitration-committee] FW: communications next week

Rupert Dance rsdance at soft-forge.com
Wed Feb 15 07:43:58 PST 2012


Hi All,

 

Just an update to let you know that Mellanox provided QLogic with FW and we
hope that they will make rapid progress working together.

 

Thanks

 

Rupert

 

From: Yaroslav Pekelis [mailto:slava at mellanox.com] 
Sent: Wednesday, February 15, 2012 10:17 AM
To: Brent Rothermel
Cc: Scott Werner; Rupert Dance
Subject: RE: communications next week

 

Brent, 

 

Please find attached FW image -please keep me posted

 

C:\Users\rsdance\Documents\Lamprey\OpenIB\Plugfest\2012-01-GA\Arbitration\Me
llanox\MSX6036F_A1.bin

 

From: Brent Rothermel [mailto:brent.rothermel at qlogic.com] 
Sent: Tuesday, February 14, 2012 8:27 PM
To: Yaroslav Pekelis
Cc: Scott Werner; Rupert Dance
Subject: RE: communications next week

 

====================================

Module                Type                  Part number     

====================================

CHASSIS               SX60XX              MSX6036F-1SFR

 

Brent Rothermel

QLogic Corporation

Voice    (610) 233-4871

Fax       (610) 233-4777

 

From: Yaroslav Pekelis [mailto:slava at mellanox.com] 
Sent: Tuesday, February 14, 2012 9:46 AM[RSD]           
To: Brent Rothermel
Cc: Scott Werner; Rupert Dance
Subject: RE: communications next week

 

Brent, Scott,

 

I have got un approval to send you the latest improved FW image. This way we
can easily update images without being tied down.

 

This will require from you to perform following steps:

1.       Install mft package on the host connected to the Switch

2.       Run opensm 

3.       Burn the image using flint command

a.       Flint -d /dev/mst<device_name> -I <image> b

4.       Halt the system and remove the management board.

5.       Power on the system

 

I will take a guess and consider that your system is MSX6036F-A1 but I would
like to ask you the verify this. I think there should be some sticker on the
box with the numbers it would be great if I can get those.

 

I hope this is not to complex procedure. 

Slava

 

From: Brent Rothermel [mailto:brent.rothermel at qlogic.com] 
Sent: Friday, February 10, 2012 6:14 PM
To: Yaroslav Pekelis
Cc: Scott Werner; Rupert Dance
Subject: communications next week

 

Hi Slava,

I'll be traveling next week, so I will be semi-available.  Scott Werner will
be doing the testing with your firmware images on the Mellanox FDR switch.
Please include him in all correspondence to me.  Rupert, please add Scott to
the meeting invite for Tuesday.

 

Thanks

 

Brent Rothermel

QLogic Corporation

Voice    (610) 233-4871

Fax       (610) 233-4777

 

 

  _____  

This message and any attached documents contain information from QLogic
Corporation or its wholly-owned subsidiaries that may be confidential. If
you are not the intended recipient, you may not read, copy, distribute, or
use this information. If you have received this transmission in error,
please notify the sender immediately by reply e-mail and then delete this
message.

 

  _____  

This message and any attached documents contain information from QLogic
Corporation or its wholly-owned subsidiaries that may be confidential. If
you are not the intended recipient, you may not read, copy, distribute, or
use this information. If you have received this transmission in error,
please notify the sender immediately by reply e-mail and then delete this
message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/iwg-arbitration-committee/attachments/20120215/266e8576/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Mellanox-QLogic Arbitration Meeting.pdf
Type: application/pdf
Size: 106025 bytes
Desc: not available
URL: <http://lists.openfabrics.org/pipermail/iwg-arbitration-committee/attachments/20120215/266e8576/attachment.pdf>


More information about the iwg-arbitration-committee mailing list