[nvmewin] Pulling a version- where to go, tag/ or trunk/?

[Robles, Raymond C]

For future reference, any tags created mean that it is also in the trunk. So the 1.0e compliance changes are in the tag directory of IDT_NVMe_1_0_e_compliance as well as in the main trunk. I create the tags to be able to revert back to specific changesets.

Thanks,
Ray

From: nvmewin-bounces at lists.openfabrics.org [mailto:nvmewin-bounces at lists.openfabrics.org] On Behalf Of Kong, Kwok
Sent: Tuesday, June 25, 2013 5:35 PM
To: Freyensee, James P; nvmewin at lists.openfabrics.org
Subject: Re: [nvmewin] Pulling a version- where to go, tag/ or trunk/?

Jay,

The latest OFA driver supports NVMe 1.00e specification.  NVMe 1.1 is not supported.
You can use the tag IDT_NVMe_1_0_e_compliance to pull the source code that conforms to the 1.00e NVMe specification.

-Kwok

From: nvmewin-bounces at lists.openfabrics.org<mailto:nvmewin-bounces at lists.openfabrics.org> [mailto:nvmewin-bounces at lists.openfabrics.org] On Behalf Of Freyensee, James P
Sent: Tuesday, June 25, 2013 5:17 PM
To: nvmewin at lists.openfabrics.org<mailto:nvmewin at lists.openfabrics.org>
Subject: [nvmewin] Pulling a version- where to go, tag/ or trunk/?

I would like to pull a 1.0e or 1.1 version of the NVMe windows driver.  Where in the source repo (I'm looking at http://www.openfabrics.org/svnrepo/nvmewin/) should I pull from?  Trunk/?  Or should I be using the tag IDT_NVMe_1_0_e_compliance (if I wanted a 1.0e version of the driver)?  I don't see a tag that clues me in on a 1.1 version so I assume I would target Trunk/ for this version?

Thanks for the help!
Jay
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/nvmewin/attachments/20130805/f8ff8a89/attachment.html>