[Openib-windows] Windows SRP multipathing

Yossi Leybovich sleybo at mellanox.co.il
Mon Dec 25 00:25:46 PST 2006 

 


________________________________

	From: openib-windows-bounces at openib.org
[mailto:openib-windows-bounces at openib.org] On Behalf Of Alex Estrin
	Sent: Monday, December 25, 2006 5:47 AM
	To: Andrey Slepuhin; Yossi Leybovich
	Cc: openib-windows at openib.org
	Subject: Re: [Openib-windows] Windows SRP multipathing
	
	
	Hi Yossi, Andrey,
	 
	Unless supported by OS, multipath DSM drivers provided by
storage vendors, it is their prerogative.
	So until HP sertified/validated OpenFabric SRP driver I do not
see how HP MPIO DSM could be used.
	 
	With regard to Microsoft there is a working generic DSM included
in MPIO DDK, that can be used as-is if HBA+storage SPC-3 compliant. I
think SRP should be just fine. What about storage?
	 
	Yossi, did you look at Microsoft DSM code?
	[Yossi Leybovich] not yet . I waiting for MS approval for
getting the MPIO DDK 
	Do you think it is workable alternative to team it with SRP?
	[Yossi Leybovich] I hope 
	 
	Thanks,
	Alex
	 
	 

________________________________

	From: openib-windows-bounces at openib.org on behalf of Andrey
Slepuhin
	Sent: Sun 12/24/2006 12:58 PM
	To: Yossi Leybovich
	Cc: openib-windows at openib.org
	Subject: Re: [Openib-windows] Windows SRP multipathing
	
	

	Dear Yossi,
	
	I have one 2-port PCI-X HCA in each of 4 cluster nodes.
Different HCA
	ports are connected to two different IB subnets managed by
Silverstorm
	InfinIO 5000 switches.
	The switches are connected to different FC controllers on HP
MSA1500cs 
	storage using IB-FC gateway (Silverstorm VFx module). On the VFx
module
	I mapped FC target to both IOCs. If I will map it only to one
IOC, I
	will see each logical disc 2 times instead of 4, but there will
be two
	SRP miniport drivers in Windows device manager marked by
exclamation sign.
	Please note that I have 2 separate subnets. Should I connect the
IB
	switches together to have a single subnet?
	
	Regarding the disks: They are writable and they are working
fine, but if
	I map a disk to the certain drive letter, this drive will be
accessible
	only while the appropriate path is working.
	
	HP storage has 2 active-active controllers, so the host can
choose any
	path to access the storage. They have MPIO-based MSD drivers and
the
	management software that allows to choose the primary and the
failover
	paths, but this software just does not see any array devices if
I'm
	using SRP as a SCSI driver. The same for array management
utility: I can
	not update the firmware and configure logical volumes on the
storage if
	I'm working through SRP driver (I was forced to plug QLogic 2340
HBA
	into one node to do these tasks).
	
	Best regards,
	Andrey
	
	
	Yossi Leybovich wrote:
	> Hi
	>
	> First I build new binaries base on revision 566.
	> I hope we will post it to the web early next week.
	> Note that the build include fix to blue screen when 2 HCA on
the same
	> host connected to the same storage.
	>
	> WinIB does support multipath but only between ports of the
same HCA.
	> Mean if you connect both ports of the HCA to the storage they
will
	> appear as one controller and switch if one port fail.
	>
	> We just now started to look at the MPIO DDK and I hope we will
be able
	> to support it.
	>
	> Can you describe the connectivity of your network ?
	> Does the multiple paths is feature in the eHP storage ? Can
you disable
	> it ?
	> What is the problem with multiple disks instances ? Cannot you
write to
	> the disks ?
	>
	> >From my experience with Enginio storage I just disable their
fail over
	> feature and I did not see the multiple disks.
	>
	> I hope that in the coming weeks we will be able to support
MPIO.
	> Thakx
	> Yossi
	>
	>
	>
	>  
	>> -----Original Message-----
	>> From: openib-windows-bounces at openib.org
	>> [mailto:openib-windows-bounces at openib.org] On Behalf Of
	>> Andrey Slepuhin
	>> Sent: Thursday, December 21, 2006 10:25 PM
	>> To: Tzachi Dar
	>> Cc: openib-windows at openib.org
	>> Subject: Re: [Openib-windows] Windows SRP multipathing
	>>
	>> Currently I'm running build 1.0.0.506.
	>>
	>> Best regards,
	>> Andrey
	>>
	>> Tzachi Dar wrote:
	>>    
	>>> What version of openib stack are you using?
	>>> As far as I can tell there have been many changes in this
area from
	>>> the last build that openib has made.
	>>> (this means that you will probably have to update your
binaries).
	>>>
	>>> Thanks
	>>> Tzachi
	>>>
	>>>  
	>>>      
	>>>> -----Original Message-----
	>>>> From: openib-windows-bounces at openib.org
	>>>> [mailto:openib-windows-bounces at openib.org] On Behalf Of
Andrey
	>>>> Slepuhin
	>>>> Sent: Thursday, December 21, 2006 4:13 PM
	>>>> To: openib-windows at openib.org
	>>>> Subject: [Openib-windows] Windows SRP multipathing
	>>>>
	>>>> Dear folks,
	>>>>
	>>>> We have 4-node cluster system using 2 QLogic (Silverstorm)
InfinIO
	>>>> 5000 switches, HP DL385 servers and HP MSA1500cs storage.
	>>>>        
	>> The cluster
	>>    
	>>>> is working under MS Windows Server 2003 x64. We
successfully
	>>>> installed IB stack including SRP drivers, and the logical
disks on
	>>>> the storage are visible on the cluster nodes. The problem
is that
	>>>> each disk is encountered 4 times due to the multiple
	>>>>        
	>> paths. We tried
	>>    
	>>>> HP DSM driver for Microsoft MPIO but unfortunately it
	>>>>        
	>> doesn't work -
	>>    
	>>>> it seems that the driver expects only QLogic and Emulex FC
	>>>>        
	>> HBAs. Does
	>>    
	>>>> anybody have an experience with IB SRP multipathing on
	>>>>        
	>> Windows? Any
	>>    
	>>>> help will be much appreciated.
	>>>>
	>>>> Thanks in advance,
	>>>> Andrey Slepuhin,
	>>>> Head of Cluster Solutions Center,
	>>>> T-Platforms
	>>>>
	>>>> http://www.t-platforms.ru/english
	>>>> tel.: +7 495 9565490, +7 495 7440995
	>>>> fax:  +7 495 9565415
	>>>> mob.: +7 916 1636117
	>>>>
	>>>>
	>>>> _______________________________________________
	>>>> openib-windows mailing list
	>>>> openib-windows at openib.org
	>>>> http://openib.org/mailman/listinfo/openib-windows
	>>>>
	>>>>    
	>>>>        
	>> _______________________________________________
	>> openib-windows mailing list
	>> openib-windows at openib.org
	>> http://openib.org/mailman/listinfo/openib-windows
	>>
	>>    
	
	_______________________________________________
	openib-windows mailing list
	openib-windows at openib.org
	http://openib.org/mailman/listinfo/openib-windows
	
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ofw/attachments/20061225/5e2be19a/attachment.html>

More information about the ofw mailing list