[Openib-windows] livefish

[Guy Corem]

Hi Leonid / Fabian

 

Can you check and confirm the following problem with livefish support:

 

Scenario:

 

1)       System is working in normal mode (no livefish) with drivers
installed.

2)       Powering off and setting the jumper to livefish.

3)       Powering on and manually updating the drivers to burner device
- Everything works ok at this stage, we can use flint to burn an image

4)       Powering off and setting the jumper to normal mode

5)       Powering on. At this point everything seems to work ok, the
drivers (including the bus driver) are being loaded correctly.

6)       Removing the drivers.

7)       Reinstalling the drivers. The Co-Installer IbInstaller isn't
being called; hence the bus driver isn't installed.

 

 

Thanks,

 

Guy Corem
Windows Developer
Voltaire Ltd.
Mobile: +972-50-7321946
Tel: +972-9-9717672
Fax: +972-9-9717660
Operator: +972-9-9717666
email: guyc at voltaire.com
web: http://www.voltaire.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ofw/attachments/20060702/3a5ff9cb/attachment.html>