[ofw] iSCSI via IPoIB on Windows XP 32 Bit clients?

Erez Cohen erezc at mellanox.co.il
Mon Jun 18 00:39:01 PDT 2007


Hi Alex,

I think iSCSI should work over IPoIB although we never test it.

As for the performance, our measurements show about 300MB/s for IPoIB on strong machines. I hope we will have IPoIB CM (connected mode) in the future that may improve the BW. 

Erez

-----Original Message-----
From: ofw-bounces at lists.openfabrics.org [mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of Axel Mertes
Sent: Friday, June 15, 2007 1:59 AM
To: ofw at lists.openfabrics.org
Subject: [ofw] iSCSI via IPoIB on Windows XP 32 Bit clients?

Hi All,

I am new to this list, but following the IB Windows approach for about three years already, with occasional contact to Erez and Marc and other people involved.

I need to make some decisions on storage system investments and would like to know if it is possible to use iSCSI protocol via IPoIB on a Windows XP 32 Bit client. On the long term we'd like to set Tiger Technologies MetaLAN on top of it for control, but the lower layer would have to be iSCSI.

The point is that we still need to stay on 32 Bit edition for some specialized HDTV broadcast video boards that aren't supporting Windows XP 64 Bit. We investigate if there are alternatives, but yet none.

So the only option for us going the IB route would be if iSCSI could work, as SCSI RDMA is currently unavailable for XP (and is expected to be unavailable in future too).

As iSCSI runs on XP 32 bit edition via any Ethernet card I see currently no reason why it should not work in conjunction with IB / IPoIB. But I have no chance to test that yet on my own.
Anyone around had been testing this yet?
If yes, what kind of transfer speeds and latency is realistic then?
Could we transfer 500 to 800 MB/s into a single machine (sourcing from several native IB storage target machines via an IB switch)?
Imagine video editing and several server systems that do at least 800 MB/s sustained, each.

Btw, is there some kind of "Jumbo Frame" setting for the IPoIB option (given its a native 20 GBit IP network it'll be wise...) and if yes, which is the largest block size supported / allowed?

Please let me know!


Mit freundlichen Grüßen,
Best regards,

Axel Mertes
Geschäftsführer/CTO
Tel: +49 69 978837-20
Fax: +49 69 978837-22
eMail: axel at magnamana.com

Magna Mana Production
Bildbearbeitung GmbH
Alexanderstraße 65
60489 Frankfurt am Main
Germany
Tel: +49 69 978837-0
Fax: +49 69 978837-34
eMail: info at magnamana.com



_______________________________________________
ofw mailing list
ofw at lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw



More information about the ofw mailing list