***SPAM*** Re: [ofw] WinOF 2.0.2 installer and support for Mellanox QDR HCA

[Napoleon Padmanaban]

I did not see any irregularities during uninstall. But, IBCleanup did the
trick.

Thanks,
NapoleonP
On Tue, Mar 10, 2009 at 3:26 PM, Smith, Stan <stan.smith at intel.com> wrote:

>  OK - when you uninstalled did you observe any irregularities?
>
> From an Privileged Administrator command window, try the following command
>
> start/wait msiexec /I WinOF_2-0-2_x64.msi
>
> If above command fails, then download, then execute, from an Privileged
> Administrator command window,  ibcleanup.bat from
> http://www.openfabrics.org/downloads/WinOF/etc/ <http://www.openfabrics.org/downloads/WinOF/etc/>
>  .
>
> When finished, reboot.
>
> retry previous msiexec command.
>
> stan
>
>
>  ------------------------------
>  *From:* Napoleon Padmanaban [mailto:napoleonp at gmail.com]
> *Sent:* Tuesday, March 10, 2009 2:56 PM
> *To:* Smith, Stan
> *Cc:* ofw at lists.openfabrics.org
> *Subject:* Re: [ofw] WinOF 2.0.2 installer and support for Mellanox QDR
> HCA
>
>  Hi,
>    OS is Windows 2008 Server(Enterprise). Yes, I explicity selected
> ConnectX HCA driver.
>
>    Yes, I did install WinOF 2.0.2 for a Infinihost HCA(sinai) before this.
> I uninstalled the drivers, plugged out that HCA and trying to install QDR
> HCA on the same setup.
>
>     Error message I see is "mlx4_hca install Err(2) cmd.exe /c cd /d
> c:\program files (x86)\WinOF\IBCore & devman.exe update mlx4_hca.inf
> MLX4\CONNECTX_HCA"
>
> Thanks,
> NapoleonP
>
> On Tue, Mar 10, 2009 at 2:38 PM, Smith, Stan <stan.smith at intel.com> wrote:
>
>>  Hello,
>>   Which Windows OS & processor arch were you attempting a WinOF 2.0.2
>> install on?
>>
>> Did you explicitly select a ConnectX HCA driver?
>>
>> What was the installer error message?
>>
>> Have you ever installed WinOF on this system?
>>
>> Bottom line the Mellanox QDR HCA(MT26428 ) should install with no
>> problems.
>>
>> stan.
>>
>>
>>  ------------------------------
>> *From:* ofw-bounces at lists.openfabrics.org [mailto:
>> ofw-bounces at lists.openfabrics.org] *On Behalf Of *Napoleon Padmanaban
>> *Sent:* Tuesday, March 10, 2009 2:27 PM
>> *To:* ofw at lists.openfabrics.org
>> *Subject:* [ofw] ***SPAM*** WinOF 2.0.2 installer and support for
>> Mellanox QDR HCA
>>
>>   Hi,
>>    I tried installing drivers for Mellanox QDR HCA(MT26428 ) using WinOF
>> 2.0.2 installer and I see the installer exits prematurely citing an error. I
>> don't see a mention of support for QDR HCA in the README or
>> Release-notes. Info on whether WinOF 2.0.2 installer supports QDR HCA will
>> be really helpful.
>>
>> Thanks,
>> NapoleonP
>> PS: on the related note WinOF at mellanox site says QDR HCA is supported.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ofw/attachments/20090310/e2a301d6/attachment.html>