[ofw] RE: Patch to support boot disk
Leonid Keller
leonid at mellanox.co.il
Sun May 3 06:07:46 PDT 2009
Applied in 2146, thank you.
________________________________
From: James Yang [mailto:jyang at xsigo.com]
Sent: Thursday, April 30, 2009 3:18 AM
To: Leonid Keller; Tzachi Dar
Cc: ofw at lists.openfabrics.org
Subject: Patch to support boot disk
Hi,
In order to support boot from IB, we need to make all the
drivers to be boot driver. Also registry "StaticChild" should not be
changed after driver update if it's modified. Please review the patch.
Thanks,
James
Index: hw/mlx4/kernel/hca/mlx4_hca.inx
===================================================================
--- hw/mlx4/kernel/hca/mlx4_hca.inx (revision 2139)
+++ hw/mlx4/kernel/hca/mlx4_hca.inx (working copy)
@@ -246,7 +246,7 @@
[MLX4HCA.ServiceInstall]
DisplayName = %MLX4HCA.ServiceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
-StartType = %SERVICE_DEMAND_START%
+StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\mlx4_hca.sys
LoadOrderGroup = extended base
@@ -275,7 +275,7 @@
[Ibbus.ServiceInstall]
DisplayName = %Ibbus.ServiceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
-StartType = %SERVICE_DEMAND_START%
+StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\ibbus.sys
LoadOrderGroup = PnP Filter
@@ -292,7 +292,7 @@
HKR,"Parameters","DebugFlags",%REG_DWORD%,0x80000000
HKR,"Parameters","ReportPortNIC",%REG_DWORD%,1
-HKR,"Parameters","StaticChild",%REG_MULTI_SZ%,IPoIB
+HKR,"Parameters","StaticChild",%REG_MULTI_SZ_NO_CLOBBER%,IPoIB
;use the following line to add your device
;HKR,"Parameters","StaticChild",%REG_MULTI_SZ_APPEND%,"XsigoBus"
@@ -315,7 +315,7 @@
[WinVerbs.ServiceInstall]
DisplayName = %WinVerbs.ServiceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
-StartType = %SERVICE_DEMAND_START%
+StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\winverbs.sys
LoadOrderGroup = PNP Filter
@@ -328,7 +328,7 @@
[WinMad.ServiceInstall]
DisplayName = %WinMad.ServiceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
-StartType = %SERVICE_DEMAND_START%
+StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\winmad.sys
LoadOrderGroup = PNP Filter
@@ -455,6 +455,7 @@
REG_DWORD = 0x00010001
REG_DWORD_NO_CLOBBER = 0x00010003
REG_MULTI_SZ = 0x00010000
+REG_MULTI_SZ_NO_CLOBBER = 0x00010002
REG_MULTI_SZ_APPEND = 0x00010008
DIRID_SYSTEM = 11
DIRID_DRIVERS = 12
Index: hw/mthca/kernel/mthca.inx
===================================================================
--- hw/mthca/kernel/mthca.inx (revision 2139)
+++ hw/mthca/kernel/mthca.inx (working copy)
@@ -256,7 +256,7 @@
[MTHCA.ServiceInstall]
DisplayName = %MTHCA.ServiceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
-StartType = %SERVICE_DEMAND_START%
+StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\mthca.sys
LoadOrderGroup = extended base
@@ -289,7 +289,7 @@
[Ibbus.ServiceInstall]
DisplayName = %Ibbus.ServiceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
-StartType = %SERVICE_DEMAND_START%
+StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\ibbus.sys
LoadOrderGroup = PnP Filter
@@ -306,7 +306,7 @@
HKR,"Parameters","DebugFlags",%REG_DWORD%,0x80000000
HKR,"Parameters","ReportPortNIC",%REG_DWORD%,1
-HKR,"Parameters","StaticChild",%REG_MULTI_SZ%,IPoIB
+HKR,"Parameters","StaticChild",%REG_MULTI_SZ_NO_CLOBBER%,IPoIB
;use the following line to add your device
;HKR,"Parameters","StaticChild",%REG_MULTI_SZ_APPEND%,"XsigoBus"
@@ -327,7 +327,7 @@
[WinVerbs.ServiceInstall]
DisplayName = %WinVerbs.ServiceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
-StartType = %SERVICE_DEMAND_START%
+StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\winverbs.sys
LoadOrderGroup = PNP Filter
@@ -338,7 +338,7 @@
[WinMad.ServiceInstall]
DisplayName = %WinMad.ServiceDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
-StartType = %SERVICE_DEMAND_START%
+StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\winmad.sys
LoadOrderGroup = PNP Filter
@@ -464,6 +464,7 @@
REG_DWORD = 0x00010001
REG_DWORD_NO_CLOBBER = 0x00010003
REG_MULTI_SZ = 0x00010000
+REG_MULTI_SZ_NO_CLOBBER = 0x00010002
REG_MULTI_SZ_APPEND = 0x00010008
DIRID_SYSTEM = 11
DIRID_DRIVERS = 12
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ofw/attachments/20090503/505ac321/attachment.html>
More information about the ofw
mailing list