[ofw] RE: Patch to support boot disk

Tue May 5 02:25:21 PDT 2009

I'm not sure. Could you try it after James' fix ?

________________________________

	From: Sufficool, Stanley [mailto:ssufficool at rov.sbcounty.gov] 
	Sent: Monday, May 04, 2009 6:31 PM
	To: Leonid Keller; James Yang; Tzachi Dar
	Cc: ofw at lists.openfabrics.org
	Subject: RE: [ofw] RE: Patch to support boot disk

	Would this also "fix" issues with Windows SRP DMIO (Soft RAID)
disks coming up offline at boot, or does SRP still load after DMIO?

		-----Original Message-----
		From: ofw-bounces at lists.openfabrics.org
[mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of Leonid Keller
		Sent: Sunday, May 03, 2009 6:08 AM
		To: James Yang; Tzachi Dar
		Cc: ofw at lists.openfabrics.org
		Subject: [ofw] RE: Patch to support boot disk

		Applied in 2146, thank you.

________________________________

			From: James Yang [mailto:jyang at xsigo.com] 
			Sent: Thursday, April 30, 2009 3:18 AM
			To: Leonid Keller; Tzachi Dar
			Cc: ofw at lists.openfabrics.org
			Subject: Patch to support boot disk

			Hi,

			In order to support boot from IB, we need to
make all the drivers to be boot driver. Also registry "StaticChild"
should not be changed after driver update if it's modified. Please
review the patch.

			Thanks,

			James

			Index: hw/mlx4/kernel/hca/mlx4_hca.inx

===================================================================

			--- hw/mlx4/kernel/hca/mlx4_hca.inx
(revision 2139)

			+++ hw/mlx4/kernel/hca/mlx4_hca.inx     (working
copy)

			@@ -246,7 +246,7 @@

			 [MLX4HCA.ServiceInstall]

			 DisplayName     = %MLX4HCA.ServiceDesc%

			 ServiceType     = %SERVICE_KERNEL_DRIVER%

			-StartType       = %SERVICE_DEMAND_START%

			+StartType       = %SERVICE_BOOT_START%

			 ErrorControl    = %SERVICE_ERROR_NORMAL%

			 ServiceBinary   = %12%\mlx4_hca.sys

			 LoadOrderGroup  = extended base

			@@ -275,7 +275,7 @@

			 [Ibbus.ServiceInstall]

			 DisplayName     = %Ibbus.ServiceDesc%

			 ServiceType     = %SERVICE_KERNEL_DRIVER%

			-StartType       = %SERVICE_DEMAND_START%

			+StartType       = %SERVICE_BOOT_START%

			 ErrorControl    = %SERVICE_ERROR_NORMAL%

			 ServiceBinary   = %12%\ibbus.sys

			 LoadOrderGroup  = PnP Filter

			@@ -292,7 +292,7 @@

HKR,"Parameters","DebugFlags",%REG_DWORD%,0x80000000

			 HKR,"Parameters","ReportPortNIC",%REG_DWORD%,1

-HKR,"Parameters","StaticChild",%REG_MULTI_SZ%,IPoIB

+HKR,"Parameters","StaticChild",%REG_MULTI_SZ_NO_CLOBBER%,IPoIB

			 ;use the following line to add your device

;HKR,"Parameters","StaticChild",%REG_MULTI_SZ_APPEND%,"XsigoBus"

			@@ -315,7 +315,7 @@

			 [WinVerbs.ServiceInstall]

			 DisplayName = %WinVerbs.ServiceDesc%

			 ServiceType = %SERVICE_KERNEL_DRIVER%

			-StartType = %SERVICE_DEMAND_START%

			+StartType = %SERVICE_BOOT_START%

			 ErrorControl = %SERVICE_ERROR_NORMAL%

			 ServiceBinary  = %12%\winverbs.sys

			 LoadOrderGroup = PNP Filter

			@@ -328,7 +328,7 @@

			 [WinMad.ServiceInstall]

			 DisplayName = %WinMad.ServiceDesc%

			 ServiceType = %SERVICE_KERNEL_DRIVER%

			-StartType = %SERVICE_DEMAND_START%

			+StartType = %SERVICE_BOOT_START%

			 ErrorControl = %SERVICE_ERROR_NORMAL%

			 ServiceBinary  = %12%\winmad.sys

			 LoadOrderGroup = PNP Filter

			@@ -455,6 +455,7 @@

			 REG_DWORD              = 0x00010001

			 REG_DWORD_NO_CLOBBER   = 0x00010003

			 REG_MULTI_SZ                  = 0x00010000

			+REG_MULTI_SZ_NO_CLOBBER        = 0x00010002

			 REG_MULTI_SZ_APPEND    = 0x00010008

			 DIRID_SYSTEM           = 11

			 DIRID_DRIVERS          = 12

			Index: hw/mthca/kernel/mthca.inx

===================================================================

			--- hw/mthca/kernel/mthca.inx     (revision
2139)

			+++ hw/mthca/kernel/mthca.inx  (working copy)

			@@ -256,7 +256,7 @@

			 [MTHCA.ServiceInstall]

			 DisplayName     = %MTHCA.ServiceDesc%

			 ServiceType     = %SERVICE_KERNEL_DRIVER%

			-StartType       = %SERVICE_DEMAND_START%

			+StartType       = %SERVICE_BOOT_START%

			 ErrorControl    = %SERVICE_ERROR_NORMAL%

			 ServiceBinary   = %12%\mthca.sys

			 LoadOrderGroup  = extended base

			@@ -289,7 +289,7 @@

			 [Ibbus.ServiceInstall]

			 DisplayName     = %Ibbus.ServiceDesc%

			 ServiceType     = %SERVICE_KERNEL_DRIVER%

			-StartType       = %SERVICE_DEMAND_START%

			+StartType       = %SERVICE_BOOT_START%

			 ErrorControl    = %SERVICE_ERROR_NORMAL%

			 ServiceBinary   = %12%\ibbus.sys

			 LoadOrderGroup  = PnP Filter

			@@ -306,7 +306,7 @@

HKR,"Parameters","DebugFlags",%REG_DWORD%,0x80000000

			 HKR,"Parameters","ReportPortNIC",%REG_DWORD%,1

-HKR,"Parameters","StaticChild",%REG_MULTI_SZ%,IPoIB

+HKR,"Parameters","StaticChild",%REG_MULTI_SZ_NO_CLOBBER%,IPoIB

			 ;use the following line to add your device

;HKR,"Parameters","StaticChild",%REG_MULTI_SZ_APPEND%,"XsigoBus"

			@@ -327,7 +327,7 @@

			 [WinVerbs.ServiceInstall]

			 DisplayName = %WinVerbs.ServiceDesc%

			 ServiceType = %SERVICE_KERNEL_DRIVER%

			-StartType = %SERVICE_DEMAND_START%

			+StartType = %SERVICE_BOOT_START%

			 ErrorControl = %SERVICE_ERROR_NORMAL%

			 ServiceBinary  = %12%\winverbs.sys

			 LoadOrderGroup = PNP Filter

			@@ -338,7 +338,7 @@

			 [WinMad.ServiceInstall]

			 DisplayName = %WinMad.ServiceDesc%

			 ServiceType = %SERVICE_KERNEL_DRIVER%

			-StartType = %SERVICE_DEMAND_START%

			+StartType = %SERVICE_BOOT_START%

			 ErrorControl = %SERVICE_ERROR_NORMAL%

			 ServiceBinary  = %12%\winmad.sys

			 LoadOrderGroup = PNP Filter

			@@ -464,6 +464,7 @@

			 REG_DWORD              = 0x00010001

			 REG_DWORD_NO_CLOBBER   = 0x00010003

			 REG_MULTI_SZ                  = 0x00010000

			+REG_MULTI_SZ_NO_CLOBBER        = 0x00010002

			 REG_MULTI_SZ_APPEND    = 0x00010008

			 DIRID_SYSTEM           = 11

			 DIRID_DRIVERS          = 12

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ofw/attachments/20090505/361c1808/attachment.html>