[ofw] need help in identifying boardid

[Sophia Germans]

I was able to get PSID with vstat, which helped me to identify the required firmware.

Thanks for your help
Sophia.

-----Original Message-----
From: Fab Tillier [mailto:ftillier at microsoft.com] 
Sent: Friday, June 11, 2010 4:32 PM
To: Smith, Stan; Sophia Germans; ofw at lists.openfabrics.org
Subject: RE: need help in identifying boardid

Note that PSID is only decoded for certain vendors by vstat.  It doesn't try to decode PSID on all HCAs.  Easy to work around if you can build your own vstat from the sources.

-Fab

Smith, Stan wrote on Fri, 11 Jun 2010 at 15:06:53

> From: ofw-bounces at lists.openfabrics.org
> [mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of Smith, Stan
> Sent: Friday, June 11, 2010 3:07 PM
> To: Sophia Germans; ofw at lists.openfabrics.org
> Subject: Re: [ofw] need help in identifying boardid
> 
> try vstat.exe, it displays firmware version in human readable for along
> with the PSID required to find the correct firmware update file.
> 
> stan.
> 
> ________________________________
> 
> From: ofw-bounces at lists.openfabrics.org
> [mailto:ofw-bounces at lists.openfabrics.org] On Behalf Of Sophia Germans
> Sent: Friday, June 11, 2010 2:57 PM
> To: ofw at lists.openfabrics.org
> Subject: [ofw] need help in identifying boardid
> I am working with Mellanox adapter MT26428. While trying to check on the
> latest software for WinOF2.2
> I get this info :
> C:\Program Files\WinOF>ibv_devinfo
> hca_id: ibv_device0
>         fw_ver:                         0x200060384
>         node_guid:                      0002:c903:0002:ce84
>         sys_image_guid:                 0002:c903:0002:ce87
>         vendor_id:                      0x02c9
>         vendor_part_id:                 26428
>         hw_ver:                         0xA0
>         phys_port_cnt:                  2
>                 port:   1
>                         state:                  PORT_ACTIVE (4)
>                         max_mtu:                2048 (4)
>                         active_mtu:             2048 (4)
>                         sm_lid:                 1
>                         port_lid:               4
>                         port_lmc:               0x00
>                 port:   2
>                         state:                  PORT_DOWN (1)
>                         max_mtu:                2048 (4)
>                         active_mtu:             2048 (4)
>                         sm_lid:                 0
>                         port_lid:               0
>                         port_lmc:               0x00
> But there is no BoardId, by which I can identify PSID.
> Is there any way I can check if the firmware is upto date.
> 
> Appreciate your help,
> 
> Thank you
> Sophia.
>