> Data point: the head of SVN builds and installs correctly and validates
> correctly for Connect-X2 and Infinihost on the 6 systems (2 CX + 4 InfiniHost)
> I tested.
The HCA information from my system is below. Stan, if you can send me a pointer offline, I'll try installing using your build to verify that I wasn't picking up some old installation.
C:\Users\Administrator>ibv_devinfo -v
hca_id: ibv_device0
fw_ver: 0x200070000
node_guid: 0002:c903:000e:c3fe
sys_image_guid: 0002:c903:000e:c401
vendor_id: 0x02c9
vendor_part_id: 26428
hw_ver: 0xB0
phys_port_cnt: 2
max_mr_size: 0xffffffffffffffff
page_size_cap: 0x1000
max_qp: 131000
max_qp_wr: 16351
device_cap_flags: 0x00005876
max_sge: 32
max_sge_rd: 0
max_cq: 65408
max_cqe: 4194303
max_mr: 262128
max_pd: 32764
max_qp_rd_atom: 16
max_ee_rd_atom: 0
max_res_rd_atom: 128
max_qp_init_rd_atom: 128
max_ee_init_rd_atom: 0
atomic_cap: ATOMIC_HCA (1)
max_ee: 0
max_rdd: 0
max_mw: 0
max_raw_ipv6_qp: 0
max_raw_ethy_qp: 0
max_mcast_grp: 8192
max_mcast_qp_attach: 56
max_total_mcast_qp_attach: 458752
max_ah: 0
max_fmr: 0
max_srq: 65472
max_srq_wr: 16383
max_srq_sge: 31
max_pkeys: 128
local_ca_ack_delay: 15
port: 1
state: PORT_ACTIVE (4)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 1
port_lid: 10
port_lmc: 0x00
max_msg_sz: 0x40000000
port_cap_flags: 0x00005080
max_vl_num: 2 (2)
bad_pkey_cntr: 0x0
qkey_viol_cntr: 0x0
sm_sl: 0
pkey_tbl_len: 16
gid_tbl_len: 128
subnet_timeout: 18
init_type_reply: 0
active_width: 4X (2)
active_speed: 10.0 Gbps (4)
phys_state: LINK_UP (5)
GID[ 0]: fe80:0000:0000:0000:0002:c903:00
0e:c3ff
port: 2
state: PORT_DOWN (1)
max_mtu: 4096 (5)
active_mtu: 4096 (5)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
max_msg_sz: 0x40000000
port_cap_flags: 0x00005080
max_vl_num: 2 (2)
bad_pkey_cntr: 0x0
qkey_viol_cntr: 0x0
sm_sl: 0
pkey_tbl_len: 16
gid_tbl_len: 128
subnet_timeout: 0
init_type_reply: 0
active_width: 4X (2)
active_speed: 2.5 Gbps (1)
phys_state: POLLING (2)
GID[ 0]: fe80:0000:0000:0000:0002:c903:00
0e:c400