[Users] PortXmitWait?

[Florent Parent]

On Mon, Mar 17, 2014 at 3:07 PM, Hal Rosenstock <hal.rosenstock at gmail.com>
wrote:
>
> Status 0x1c to SwitchInfo means that the switch SMA is rejecting some set
from the SM. Can you reconfigure SM to not use mfttop by changing/adding
the following in the config file:
>
> # Use SwitchInfo:MulticastFDBTop if advertised in PortInfo:CapabilityMask
> use_mfttop FALSE
>
> and SIGHUP'ing OpenSM. I'm hoping that will remove these errors in the
log.


OK.

>
>
> What do smpquery -D 0,1,33,30,28 pi 0 and smpquery -D 0,1,33,30,28 si say
?

Commands output below.

>
>
> Which switch type is it so I can correlate it to the FW versions.

All 80 I4 chips where these errors are reported are in the QNEMs (
https://dl.dropboxusercontent.com/u/2292440/CQ-UL_IB_topology.pdf).
Firmware running on those are 7.3.0:

Image type:      FS2
FW Version:      7.3.0
Product Version: QNEM-04-1.10
Device ID:       48438
Chip Revision:   A0
Description:     Node             Sys image
GUIDs:           0021283a80f00050 0021283a80f00053
Board ID:        n/a (X5500A-I4B)
VSD:             n/a
PSID:            X5500A-I4B

>
> I'm not sure about the effect of those "sibling" links in terms of the
fat tree routing.

OK.
Thanks
Florent


# smpquery pi -D 0,1,33,30,28 0
# Port info: DR path slid 65535; dlid 65535; 0,1,33,30,28 port 0
Mkey:............................0x0000000000000000
GidPrefix:.......................0xfe80000000000000
Lid:.............................332
SMLid:...........................1
CapMask:.........................0x42500848
                                IsTrapSupported
                                IsSLMappingSupported
                                IsSystemImageGUIDsupported
                                IsVendorClassSupported
                                IsCapabilityMaskNoticeSupported
                                IsClientRegistrationSupported
                                IsMulticastFDBTopSupported
DiagCode:........................0x0000
MkeyLeasePeriod:.................0
LocalPort:.......................28
LinkWidthEnabled:................1X or 4X
LinkWidthSupported:..............1X or 4X
LinkWidthActive:.................4X
LinkSpeedSupported:..............2.5 Gbps or 5.0 Gbps or 10.0 Gbps
LinkState:.......................Active
PhysLinkState:...................LinkUp
LinkDownDefState:................Polling
ProtectBits:.....................0
LMC:.............................0
LinkSpeedActive:.................10.0 Gbps
LinkSpeedEnabled:................2.5 Gbps or 5.0 Gbps or 10.0 Gbps
NeighborMTU:.....................4096
SMSL:............................0
VLCap:...........................VL0-3
InitType:........................0x00
VLHighLimit:.....................0
VLArbHighCap:....................0
VLArbLowCap:.....................0
InitReply:.......................0x00
MtuCap:..........................4096
VLStallCount:....................0
HoqLife:.........................0
OperVLs:.........................VL0-3
PartEnforceInb:..................0
PartEnforceOutb:.................0
FilterRawInb:....................0
FilterRawOutb:...................0
MkeyViolations:..................0
PkeyViolations:..................0
QkeyViolations:..................0
GuidCap:.........................1
ClientReregister:................0
McastPkeyTrapSuppressionEnabled:.0
SubnetTimeout:...................18
RespTimeVal:.....................19
LocalPhysErr:....................0
OverrunErr:......................0
MaxCreditHint:...................0
RoundTrip:.......................0
CapabilityMask2:.................0x0000
LinkSpeedExtActive:..............No Extended Speed
LinkSpeedExtSupported:...........0
LinkSpeedExtEnabled:.............0

# smpquery si -D 0,1,33,30,28
# Switch info: DR path slid 65535; dlid 65535; 0,1,33,30,28
LinearFdbCap:....................49152
RandomFdbCap:....................0
McastFdbCap:.....................4096
LinearFdbTop:....................4660
DefPort:.........................0
DefMcastPrimPort:................255
DefMcastNotPrimPort:.............255
LifeTime:........................18
StateChange:.....................0
OptSLtoVLMapping:................1
LidsPerPort:.....................0
PartEnforceCap:..................32
InboundPartEnf:..................1
OutboundPartEnf:.................1
FilterRawInbound:................1
FilterRawOutbound:...............1
EnhancedPort0:...................0
MulticastFDBTop:.................0x0000
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/users/attachments/20140317/e9cb98b0/attachment.html>