[Users] FW: Building OFA OFED-3.18-2 on Redhat 6.8
Rupert Dance
rsdance at soft-forge.com
Sat Dec 3 10:22:32 PST 2016
Amiya,
1. To my knowledge, there are no immediate plans to support 6.8 in
either OFED 3.18-x or OFED 4.8. But I will bring this up in the EWG Meeting
on 12/5/2016.
2. OFED 4.8 is in daily build status which means that we are working on
this project and we are still some time away from producing a Release
Candidate (RC) with full support for the listed distros and user packages.
There are still some backports that have not been completed for RHEL 7.2 for
example. So if you want to experiment with either 3.18-2 or 4.8, your best
bet is to setup a test system with one of the Distros that we currently
support. Our goal for 4.8 is to get everything working for the supported
Distros. After that work is complete we would begin adding support for RHEL
6.8 or RHEL 7.3 for example assuming we agree that 6.8 is worth the effort.
So even if we decide to add support, my guess is that it will not be until
sometime in Q1 2017.
I have added a short little document that may help you with the OFED 4.8
daily build if you want to experiment with 7.2.
Thanks and have fun,
Rupert
From: Amiya Maji [mailto:amaji at purdue.edu]
Sent: Friday, December 02, 2016 5:35 PM
To: Rupert Dance; users at lists.openfabrics.org
Subject: Re: [Users] Building OFA OFED-3.18-2 on Redhat 6.8
Rupert/Aleksandr,
Thank you very much for the response!
I did notice the release notes earlier and was hoping that someone had a
patch to make things work. I think it would benefit several in the community
if OFED supports latest RHEL-6.x release.
Is there any plan to support RHEL-6.8 in OFED-4.8 release? I tried to build
the daily version but that didn't work eithergin-left:0in; font-size:12.0pt;
font-family:"Times New Roman","serif";} span.EmailStyle18
{mso-style-type:personal-compose; color:black;} .MsoChpDefault
{mso-style-type:export-only; font-size:10.0pt;} @page WordSection1
{size:8.5in 11.0in; margin:1.0in 1.0in 1.0in 1.0in;} div.WordSection1
{page:WordSection1;} -->
Rupert/Aleksandr,
Thank you very much for the response!
I did notice the release notes earlier and was hoping that someone had a
patch to make things work. I think it would benefit several in the community
if OFED supports latest RHEL-6.x release.
Is there any plan to support RHEL-6.8 in OFED-4.8 release? I tried to build
the daily version but that didn't work either.
Regards,
Amiya.
_____
From: Rupert Dance <mailto:rsdance at soft-forge.com> <rsdance at soft-forge.com>
Sent: Monday, November 14, 2016 4:17:42 PM
To: <mailto:Aleksandr.Nepomnyashchiy at tdameritrade.com>
Aleksandr.Nepomnyashchiy at tdameritrade.com; Amiya K Maji;
<mailto:users at lists.openfabrics.org> users at lists.openfabrics.org
Subject: RE: [Users] Building OFA OFED-3.18-2 on Redhat 6.8
Hi,
This is probably because 3.18-2 did not have backports for RHEL 6.8 since
3.18-2 was released in July (see attached release notes). I will bring this
issue up in the next EWG meeting to see if we want to consider support for
6.8 with another 3.18-xx release.
o Linux Operating Systems:
- RedHat EL6.5 2.6.32-431.el6
- RedHat EL6.6 2.6.32-504.el6
- RedHat EL6.7 2.6.32-573.el6
- RedHat EL7.0 3.10.0-123.el7
- RedHat EL7.1 3.10.0-229.el7
- RedHat EL7.2 3.10.0-327.el7
- SLES11 SP3 3.0.76-0.9.1
- SLES11 SP4 3.0.101-63
- SLES12 3.12.28-4
- SLES12.1 3.12.49-11.1
- kernel.org 3.18 *
Thanks
Rupert
From: Users [ <mailto:users-bounces at lists.openfabrics.org>
mailto:users-bounces at lists.openfabrics.org] On Behalf Of
<mailto:Aleksandr.Nepomnyashchiy at tdameritrade.com>
Aleksandr.Nepomnyashchiy at tdameritrade.com
Sent: Monday, November 14, 2016 3:57 PM
To: <mailto:amaji at purdue.edu> amaji at purdue.edu;
<mailto:users at lists.openfabrics.org> users at lists.openfabrics.org
Subject: Re: [Users] Building OFA OFED-3.18-2 on Redhat 6.8
Amiya,
I had the same issue - errors while building OFED-3.18-2 on REHL 6.8. I
switched to OFED-3.18-2 on RHEL 6.7 and was able to build without any
issues.
I would be curious to know if you manage to build OFED-3.18-2 on REHL 6.8.
Thank you,
Aleksandr Nepomnyashchiy
From: Users [ <mailto:users-bounces at lists.openfabrics.org>
mailto:users-bounces at lists.openfabrics.org] On Behalf Of Amiya K Maji
Sent: Monday, November 14, 2016 3:46 PM
To: HYPERLINK " <mailto:users at lists.openfabrics.org>
mailto:users at lists.openfabrics.org" <mailto:users at lists.openfabrics.org>
users at lists.openfabrics.org
Subject: [Users] Building OFA OFED-3.18-2 on Redhat 6.8
Hi,
I am trying to build OFA OFED drivers on Redhat-6.8 (Kernel 2.6.32.642) but
encountering various errors pasted below. I have tried building both
"--with-xeon-phi" and without -- but faced same errors.
If anyone has experience building OFED on Kernel-2.6.32.642, I would
appreciate some guidance. If it is not compatible, can someone suggest me a
compatible OFED driver?
Error messages:
---------------------
include/linux/percpu.h:713: error: 'printk_func_t' undeclared here (not in a
function)
include/linux/percpu.h:713: warning: type defaults to 'int' in declaration
of 'per_cpu__printk_func'
--
include/linux/skbuff.h: In function 'skb_probe_transport_header':
include/linux/skbuff.h:1408: error: 'struct flow_keys' has no member named
'thoff'
Best regards,
AM
--
-----
Amiya K Maji, Ph.D.
Scientific Applications Analyst
Research Computing, ITaP
Purdue University
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/users/attachments/20161203/3a971aff/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OFED-4.8-CentOS7-2-Installation Instructions-v3.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 20286 bytes
Desc: not available
URL: <http://lists.openfabrics.org/pipermail/users/attachments/20161203/3a971aff/attachment.docx>
More information about the Users
mailing list