[ofa-general] HCA Firmware Upgrade from 4.6.0 to 4.8.200

[Sufficool, Stanley]

Most likely: MHGA28-1T

You really need the PSID to properly identify this.

-----Original Message-----
From: general-bounces at lists.openfabrics.org
[mailto:general-bounces at lists.openfabrics.org] On Behalf Of Adit
Ranadive
Sent: Friday, December 14, 2007 2:39 PM
To: general at lists.openfabrics.org
Subject: [ofa-general] HCA Firmware Upgrade from 4.6.0 to 4.8.200


Hi,

I was trying to perform an upgrade from the version 4.6.0 to the version
4.8.200 as given on the Mellanox site. I have the follwoing HCA:
InfiniBand: Mellanox Technologies MT25208 InfiniHost III Ex (Tavor
compatibility mode) (rev a0) - from lspci

fw_ver:                         4.6.0
        node_guid:                      0005:ad00:0005:4208
        sys_image_guid:                 0005:ad00:0005:420b
        vendor_id:                      0x05ad
        vendor_part_id:                 25208
        hw_ver:                         0xA0
        phys_port_cnt:                  2




-- 
Adit Ranadive
MS CS Candidate
Georgia Institute of Technology,
Atlanta, GA
_______________________________________________
general mailing list
general at lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general

To unsubscribe, please visit
http://openib.org/mailman/listinfo/openib-general