[openfabrics-ewg] SDP issue with IBED RC3

Aviram Gutman aviram at mellanox.co.il
Wed Apr 12 06:40:06 PDT 2006


I know that:
 
mthca, core, IPoIB, OSU MPI, OSM, SRP- Work
 
SDP - Waiting for the redesign to complete.
 
Needs the other members inputs regarding:
 
iPATH, iSER, UDAPL, RDS and OpenMPI
 
 
Regards,
   Aviram
 

________________________________

From: Sharma, Karun [mailto:ksharma at silverstorm.com] 
Sent: Wednesday, April 12, 2006 4:33 PM
To: Aviram Gutman; Scott Weitzenkamp (sweitzen);
openfabrics-ewg at openib.org; Michael S. Tsirkin
Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3


Hi:
 
Is it possible to let us know what is working/included in IBED RC3 and
what is not? It may be a good idea to include a small release note. 
 
Thanks
Karun
 

	-----Original Message-----
	From: Aviram Gutman [mailto:aviram at mellanox.co.il]
	Sent: Wednesday, April 12, 2006 3:08 AM
	To: Scott Weitzenkamp (sweitzen); Sharma, Karun;
openfabrics-ewg at openib.org; Michael S. Tsirkin
	Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3
	
	
	Hi,
	 
	There is no point to check SDP now. We released that the SDP
code in OF is not good enough, not stable and has many races. Michael
Tsirkin is recoding some parts of it. We anticipate that within 2 weeks
the code will stabilize and we'll post it. 
	 
	Regards,
	   Aviram
	 

________________________________

	From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Scott
Weitzenkamp (sweitzen)
	Sent: Wednesday, April 12, 2006 12:40 AM
	To: Sharma, Karun; openfabrics-ewg at openib.org
	Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3
	
	
	When these kinds of problems happen to me, I start by debugging
with strace, to make sure both netserver and netperf are using SDP.


________________________________

		From: Sharma, Karun [mailto:ksharma at silverstorm.com] 
		Sent: Tuesday, April 11, 2006 2:12 PM
		To: Scott Weitzenkamp (sweitzen);
openfabrics-ewg at openib.org
		Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3
		
		
		Hi
		 
		Yes, netserver was restarted with libsdp. I didn't get
any error there.
		I face same issue even if i use the default config
(libsdp.conf) . Netserver was started using default libsdp.conf.
		For netperf, initially i used default libsdp.conf file
but when it didn't worked i changed it as mentioned in my previous mail.
		 
		Attached below is the output from netserver machine.
		 
		Thanks
		Karun
		 
	
#################################################################
		[st44 Tue Apr 11 15:21:38]# export
LD_LIBRARY=/usr/local/ibed/lib/libsdp.so
		[st44 Tue Apr 11 15:21:59]# export
LIBSDP_CONFIG_FILE=/usr/local/ibed/etc/libsdp.conf netserver
		[st44 Tue Apr 11 15:22:30]# netserver
		Starting netserver at port 12865
		Starting netserver at hostname 0.0.0.0 port 12865 and
family AF_UNSPEC
		[st44 Tue Apr 11 15:22:33]#
	
####################################################################

			-----Original Message-----
			From: Scott Weitzenkamp (sweitzen)
[mailto:sweitzen at cisco.com]
			Sent: Tuesday, April 11, 2006 5:07 PM
			To: Sharma, Karun; openfabrics-ewg at openib.org
			Subject: RE: [openfabrics-ewg] SDP issue with
IBED RC3
			
			
			Did you restart netserver w/libsdp, too?
			 
			What happens when you use libsdp.so with the
default libsdp.conf config?
			 
			Scott


________________________________

				From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
				Sent: Tuesday, April 11, 2006 2:05 PM
				To: openfabrics-ewg at openib.org
				Subject: [openfabrics-ewg] SDP issue
with IBED RC3
				
				

				Hi: 

				I am trying to measure SDP throughput
using netperf. But as soon as i enable SDP for netperf, my netperf is
not able to establish a connection. In my libsdp.conf file, i have
included following

				match destination 172.26.16.44/24 
				match listen * 
				match program * 

				Please let me know if i missed out
something. 

				Attached below is the output. Initially
without SDP, netperf was working fine. Then I enabled sdp and after that
my netperf doesn't work.

				Thanks 
				Karun 

	
################################################## 
				[st45 Tue Apr 11 15:46:03]# netperf -H
172.26.16.44 
				TCP STREAM TEST from 0.0.0.0 (0.0.0.0)
port 0 AF_INET to 172.26.16.44 (172.26.16 
				Recv   Send    Send 
				Socket Socket  Message  Elapsed 
				Size   Size    Size     Time
Throughput 
				bytes  bytes   bytes    secs.
10^6bits/sec 

				 87380  16384  16384    10.00    1137.17

				[st45 Tue Apr 11 15:46:17]# vi
/usr/local/ibed/etc/libsdp.conf 
				[st45 Tue Apr 11 15:52:25]# export
LD_PRELOAD=/usr/local/ibed/lib/libsdp.so 
				[st45 Tue Apr 11 15:52:58]# export
LIBSDP_CONFIG_FILE=/usr/local/ibed/etc/libsdp.conf netperf 
				[st45 Tue Apr 11 15:53:33]# netperf -H
172.26.16.44 
				establish control: are you sure there is
a netserver listening on 172.26.16.44 at port 12865? 
				establish_control could not establish
the control connection from 0.0.0.0 port 0 address family AF_UNSPEC to
172.26.16.44 port 12865 address family AF_UNSPEC

				[st45 Tue Apr 11 15:53:42]# 

	
####################################################### 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20060412/46623d12/attachment.html>


More information about the ewg mailing list