[openfabrics-ewg] SDP issue with IBED RC3

[Sharma, Karun]

Hi:
 
Is it possible to let us know what is working/included in IBED RC3 and what is not? It may be a good idea to include a small release note. 
 
Thanks
Karun
 

-----Original Message-----
From: Aviram Gutman [mailto:aviram at mellanox.co.il]
Sent: Wednesday, April 12, 2006 3:08 AM
To: Scott Weitzenkamp (sweitzen); Sharma, Karun; openfabrics-ewg at openib.org; Michael S. Tsirkin
Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3


Hi,
 
There is no point to check SDP now. We released that the SDP code in OF is not good enough, not stable and has many races. Michael Tsirkin is recoding some parts of it. We anticipate that within 2 weeks the code will stabilize and we'll post it. 
 
Regards,
   Aviram
 

  _____  

From: openfabrics-ewg-bounces at openib.org [mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Scott Weitzenkamp (sweitzen)
Sent: Wednesday, April 12, 2006 12:40 AM
To: Sharma, Karun; openfabrics-ewg at openib.org
Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3


When these kinds of problems happen to me, I start by debugging with strace, to make sure both netserver and netperf are using SDP.


  _____  

From: Sharma, Karun [mailto:ksharma at silverstorm.com] 
Sent: Tuesday, April 11, 2006 2:12 PM
To: Scott Weitzenkamp (sweitzen); openfabrics-ewg at openib.org
Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3


Hi
 
Yes, netserver was restarted with libsdp. I didn't get any error there.
I face same issue even if i use the default config (libsdp.conf) . Netserver was started using default libsdp.conf.
For netperf, initially i used default libsdp.conf file but when it didn't worked i changed it as mentioned in my previous mail.
 
Attached below is the output from netserver machine.
 
Thanks
Karun
 
#################################################################
[st44 Tue Apr 11 15:21:38]# export LD_LIBRARY=/usr/local/ibed/lib/libsdp.so
[st44 Tue Apr 11 15:21:59]# export LIBSDP_CONFIG_FILE=/usr/local/ibed/etc/libsdp.conf netserver
[st44 Tue Apr 11 15:22:30]# netserver
Starting netserver at port 12865
Starting netserver at hostname 0.0.0.0 port 12865 and family AF_UNSPEC
[st44 Tue Apr 11 15:22:33]#
####################################################################

-----Original Message-----
From: Scott Weitzenkamp (sweitzen) [mailto:sweitzen at cisco.com]
Sent: Tuesday, April 11, 2006 5:07 PM
To: Sharma, Karun; openfabrics-ewg at openib.org
Subject: RE: [openfabrics-ewg] SDP issue with IBED RC3


Did you restart netserver w/libsdp, too?
 
What happens when you use libsdp.so with the default libsdp.conf config?
 
Scott


  _____  

From: openfabrics-ewg-bounces at openib.org [mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
Sent: Tuesday, April 11, 2006 2:05 PM
To: openfabrics-ewg at openib.org
Subject: [openfabrics-ewg] SDP issue with IBED RC3



Hi: 

I am trying to measure SDP throughput using netperf. But as soon as i enable SDP for netperf, my netperf is not able to establish a connection. In my libsdp.conf file, i have included following

match destination 172.26.16.44/24 
match listen * 
match program * 

Please let me know if i missed out something. 

Attached below is the output. Initially without SDP, netperf was working fine. Then I enabled sdp and after that my netperf doesn't work.

Thanks 
Karun 

################################################## 
[st45 Tue Apr 11 15:46:03]# netperf -H 172.26.16.44 
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 172.26.16.44 (172.26.16 
Recv   Send    Send 
Socket Socket  Message  Elapsed 
Size   Size    Size     Time     Throughput 
bytes  bytes   bytes    secs.    10^6bits/sec 

 87380  16384  16384    10.00    1137.17 
[st45 Tue Apr 11 15:46:17]# vi /usr/local/ibed/etc/libsdp.conf 
[st45 Tue Apr 11 15:52:25]# export LD_PRELOAD=/usr/local/ibed/lib/libsdp.so 
[st45 Tue Apr 11 15:52:58]# export LIBSDP_CONFIG_FILE=/usr/local/ibed/etc/libsdp.conf netperf 
[st45 Tue Apr 11 15:53:33]# netperf -H 172.26.16.44 
establish control: are you sure there is a netserver listening on 172.26.16.44 at port 12865? 
establish_control could not establish the control connection from 0.0.0.0 port 0 address family AF_UNSPEC to 172.26.16.44 port 12865 address family AF_UNSPEC

[st45 Tue Apr 11 15:53:42]# 

####################################################### 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20060412/9a96e1da/attachment.html>