[openfabrics-ewg] IBED-RC3 Installation fails

[Sharma, Karun]

The logs are the initial logs which were obtained before disabling ipath driver. After disabling ipath, mpi starts giving problem of "mpicc : command not found". I then excluded mpi from the install and its working.
 
As Aviram mentioned that Suse9.3 is not in the support matrix, so i now moved to redhat.
 
Thanks
Karun
 
 

-----Original Message-----
From: openfabrics-ewg-bounces at openib.org [mailto:openfabrics-ewg-bounces at openib.org]On Behalf Of Jeff Squyres (jsquyres)
Sent: Tuesday, April 18, 2006 2:09 PM
To: openfabrics-ewg at openib.org
Subject: RE: [openfabrics-ewg] IBED-RC3 Installation fails 


mpicc is part of the MPI installation, not the OS.  MVAPICH is still the default MPI, so you should be getting MVAPICH's mpicc (not Open MPI's mpicc).
 
I don't see this error in the logs that you sent, however.  What was trying to build when this failed?
 


  _____  

From: openfabrics-ewg-bounces at openib.org [mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
Sent: Tuesday, April 18, 2006 10:45 AM
To: Scott Weitzenkamp (sweitzen); openfabrics-ewg at openib.org
Subject: RE: [openfabrics-ewg] IBED-RC3 Installation fails 


Hi Scott:
 
It works if I exclude ipath and mpi. For mpi, i am getting an error "mpicc : command not found". mpicc is a part of OS or  IBED install? I was assuming that it should be a part of openMPI.
 
Aviram:
 

I am following the readme file of IBED RC3, which points me to following location
https://docs.mellanox.com/dm/ibgold/ReadMe.html.  Here the release notes say that Suse9.3 is supported.
 
Please let me know the updated supported matrix.
 
Regards
Karun
 

-----Original Message-----
From: Scott Weitzenkamp (sweitzen) [mailto:sweitzen at cisco.com]
Sent: Tuesday, April 18, 2006 11:27 AM
To: Sharma, Karun; openfabrics-ewg at openib.org
Subject: RE: [openfabrics-ewg] IBED-RC3 Installation fails 


Does it work if you exclude the ipath driver?
 
Scott Weitzenkamp
SQA and Release Manager
Cisco Systems


  _____  

From: openfabrics-ewg-bounces at openib.org [mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
Sent: Tuesday, April 18, 2006 8:11 AM
To: openfabrics-ewg at openib.org
Subject: [openfabrics-ewg] IBED-RC3 Installation fails 



Hi: 

I am trying to install IBED-RC3 on a 64-bit Intel machine. The machine is loaded with Suse9.3 (2.6.11.4-20a-smp kernel version).

I am getting following error 
##################################################### 
ERROR: Failed executing "/tmp/openib-1.0/build_rpm.sh --prefix /usr/local/ibed --build_root /var/tmp/IBED --packages ib_ipath ib_ipoib ib_sdp ib_srp ib_verbs -- --with-dapl --with-libibat --with-libibcm --with-libibcommon --with-libibmad --with-libibumad --with-libibverbs --with-libipathverbs --with-libmthca --with-librdmacm --with-libsdp --with-mstflint --with-openib-diags --with-opensm --with-perftest --with-srptools --with-tvflash -kver 2.6.11.4-20a-smp --ksrc /lib/modules/2.6.11.4-20a-smp/build "

See log file: /tmp/IBED.31878.log 


st73:~/IBED-1.0-rc3 # 
######################################################## 

Attached are the 2 log files. Let me know if any other info is required. 

Thanks 
Karun 

<<make_kernel.log>> <<IBED.31878.log>> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20060418/8dfd9eed/attachment.html>