[openfabrics-ewg] IBED-RC3 Installation fails

[Jeff Squyres (jsquyres)]

It would be most helpful to see the full logs where the "mpicc : command
not found" error occurs.
 
Can you send those?
 
Thanks.


________________________________

	From: Sharma, Karun [mailto:ksharma at silverstorm.com] 
	Sent: Tuesday, April 18, 2006 11:54 AM
	To: Jeff Squyres (jsquyres); openfabrics-ewg at openib.org
	Subject: RE: [openfabrics-ewg] IBED-RC3 Installation fails 
	
	
	The logs are the initial logs which were obtained before
disabling ipath driver. After disabling ipath, mpi starts giving problem
of "mpicc : command not found". I then excluded mpi from the install and
its working.
	 
	As Aviram mentioned that Suse9.3 is not in the support matrix,
so i now moved to redhat.
	 
	Thanks
	Karun
	 
	 

		-----Original Message-----
		From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org]On Behalf Of Jeff Squyres
(jsquyres)
		Sent: Tuesday, April 18, 2006 2:09 PM
		To: openfabrics-ewg at openib.org
		Subject: RE: [openfabrics-ewg] IBED-RC3 Installation
fails 
		
		
		mpicc is part of the MPI installation, not the OS.
MVAPICH is still the default MPI, so you should be getting MVAPICH's
mpicc (not Open MPI's mpicc).
		 
		I don't see this error in the logs that you sent,
however.  What was trying to build when this failed?
		 
		
		

________________________________

			From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
			Sent: Tuesday, April 18, 2006 10:45 AM
			To: Scott Weitzenkamp (sweitzen);
openfabrics-ewg at openib.org
			Subject: RE: [openfabrics-ewg] IBED-RC3
Installation fails 
			
			
			Hi Scott:
			 
			It works if I exclude ipath and mpi. For mpi, i
am getting an error "mpicc : command not found". mpicc is a part of OS
or  IBED install? I was assuming that it should be a part of openMPI.
			 
			Aviram:
			 
			
			I am following the readme file of IBED RC3,
which points me to following location
			https://docs.mellanox.com/dm/ibgold/ReadMe.html.
Here the release notes say that Suse9.3 is supported.
			 
			Please let me know the updated supported matrix.
			 
			Regards
			Karun
			 

				-----Original Message-----
				From: Scott Weitzenkamp (sweitzen)
[mailto:sweitzen at cisco.com]
				Sent: Tuesday, April 18, 2006 11:27 AM
				To: Sharma, Karun;
openfabrics-ewg at openib.org
				Subject: RE: [openfabrics-ewg] IBED-RC3
Installation fails 
				
				
				Does it work if you exclude the ipath
driver?
				 
				Scott Weitzenkamp
				SQA and Release Manager
				Cisco Systems


________________________________

				From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Sharma, Karun
				Sent: Tuesday, April 18, 2006 8:11 AM
				To: openfabrics-ewg at openib.org
				Subject: [openfabrics-ewg] IBED-RC3
Installation fails 
				
				

				Hi: 

				I am trying to install IBED-RC3 on a
64-bit Intel machine. The machine is loaded with Suse9.3
(2.6.11.4-20a-smp kernel version).

				I am getting following error 
	
##################################################### 
				ERROR: Failed executing
"/tmp/openib-1.0/build_rpm.sh --prefix /usr/local/ibed --build_root
/var/tmp/IBED --packages ib_ipath ib_ipoib ib_sdp ib_srp ib_verbs --
--with-dapl --with-libibat --with-libibcm --with-libibcommon
--with-libibmad --with-libibumad --with-libibverbs --with-libipathverbs
--with-libmthca --with-librdmacm --with-libsdp --with-mstflint
--with-openib-diags --with-opensm --with-perftest --with-srptools
--with-tvflash -kver 2.6.11.4-20a-smp --ksrc
/lib/modules/2.6.11.4-20a-smp/build "

				See log file: /tmp/IBED.31878.log 


				st73:~/IBED-1.0-rc3 # 
	
######################################################## 

				Attached are the 2 log files. Let me
know if any other info is required. 

				Thanks 
				Karun 

				<<make_kernel.log>> <<IBED.31878.log>> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20060419/62e601f8/attachment.html>