[openfabrics-ewg] OFED-1.0-rc6 is available

[Vladimir Sokolovsky]

Hi Karun,
I can't reproduce this issue.
Please try '/etc/init.d/openibd restart' and send me the output.

Please check that ifcfg-ib0 located under /etc/sysconfig/network on SuSE and
under /etc/sysconfig/network-scripts on RedHat/Fedora.
Thanks,

Regards,
Vladimir



Sharma, Karun wrote:
> Hi Tziporet:
>  
> At the end of install script, we specify IP addresses for ib0 and ib1 
> interfaces. Then i reboot the system. After the system comes back, i 
> observed that ip address of ib0 interface (ifconfig ib0) is missing. 
> We need to configure again the ip address of ib0 and ib1 interfaces. 
> Please let me know if this is a bug. Why do we need to specify same ip 
> address twice? I can see the IP address which i configure during 
> install time in ifcfg-ib0 file.
>  
> I have seen this behaviour on RHEL4 up2 and FC4 servers. Below are 
> some logs.
>  
> Thanks
> Karun
>  
> ################################################################
>  
> [root at ss23 ~]# /etc/init.d/opensmd status
> opensm (pid 3216) is running...
> [root at ss23 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0
> DEVICE=ib0
> BOOTPROTO=static
> IPADDR=172.20.51.223
> NETMASK=255.255.255.0
> NETWORK=172.20.0.0
> BROADCAST=172.20.51.255
> ONBOOT=yes
> [root at ss23 ~]# ifconfig ib0
> ib0       Link encap:InfiniBand  HWaddr 
> 00:00:00:14:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00 
>           inet6 addr: fe80::206:6a00:a000:537/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:2044  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:128
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> [root at ss23 ~]#
> ##############################################################################