[openfabrics-ewg] RE: Coordinators meeting toward IBED RC3

[Scott Weitzenkamp (sweitzen)]

Cisco SQA will test uDAPL with HP MPI and Intel MPI.
 
Scott


________________________________

	From: openfabrics-ewg-bounces at openib.org
[mailto:openfabrics-ewg-bounces at openib.org] On Behalf Of Tziporet Koren
	Sent: Thursday, March 30, 2006 8:24 AM
	To: Tziporet Koren; Matters, Todd; Kamen Bodourov (kbodouro);
Moni Levy; Vladimir Sokolovsky; Amit Krig; Bryan O'Sullivan; Jeff
Squyres (jsquyres); Matt Leininger
	Cc: Openfabrics-ewg at openib.org
	Subject: [openfabrics-ewg] RE: Coordinators meeting toward IBED
RC3
	
	

	See meeting summary inside

	Tziporet

	 

	 

	Agenda:

	a. Review main changes from RC2 to RC3:

	1.      Bug fixes according to problems reported 

	2.      OpenMPI 

	3.      Pathscale (ipath) driver 

	4.      uDAPL 

	5.      ibis included 

	6.      Standard network configuration (This may be delayed to
RC4) 

	OSes where we can't work with the standart scripts due to
issues: 

	1. Fedora C4 ip reports that the configured IPoIB adress already
exists in the subnet

	2. SuSE 10 & SLES - cannot remove modules since they are loaded
by the hotplug mechanism

	 

	 b. Issues to close:

	1.      Sources repository - Agree on the proposal I sent today
- OK

	2.      Fedora C5 is out - do we need to support it? Pathscale
will test it on Intel & AMD 64 bits.

	3.      uDAPL - Who is going to test it? SST may test uDAPL;
going to ask Intel after a mail to the general list will be sent.

	 

	c. Status update:

	1.      RC2 testing status - Each coordinator will report his
company progress 

	Todd will sent SST RDS testing status

	Voltaire - tested partition part of IPoIB, worked on iSER

	Cisco - see email from Scott

	Mellanox - see mail from Amit

	2.      Compilation of RDS - Bob to send list of kernels that
its working on

	3.      Open MPI - package - integration started with no issues
so far

	4.      Compilation of iSER - a fix was sent

	5.      SRP development:

	        FMR - implemented - pending check-in of Roland

	        Tunable parameters framework - MLX (Vu) - on work

	        Dynamic add/remove targets - MLX (Ishai) using the SA is
part of Errata Release Version: 1.2 1/26/2006 Chapter/Subsection:
15.2.5.3, enable to ask query for all ports that is_dm cabability is set
(this means it is an SRP target). - on work - Ishai & Vu to send
explanation and see this solution is reviewed by all.

	        Going to do backport of RH EL4 up3 - Cisco - up 2 is
also important, we will try to do it too.

	        Should be ready for RC4

	   6.  SDP development - Code complete; under debug; to be in
RC4.

	 

	Open discussion:

	*	FW images that the release was tested with: Each company
will send a pointer to location of all FW images that were QAed. This
information will be available in the release notes. 
	*	Diagnostic tools - Tziporet will send an explanation on
the diagnostic tools in the release. 

	 

	 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20060330/b0585f2c/attachment.html>