[openfabrics-ewg] [openib-general] OFED 1.1-RC7 build problem on SLES10
Erez Zilber
erezz at voltaire.com
Tue Oct 17 23:19:20 PDT 2006
I reported the same problem last week:
http://openib.org/pipermail/openfabrics-ewg/2006-October/001714.html
--
____________________________________________________________
Erez Zilber | 972-9-971-7689
Software Engineer, Storage Team
Voltaire – _The Grid Backbone_
__
www.voltaire.com <http://www.voltaire.com/>
Scott Weitzenkamp (sweitzen) wrote:
> You need the kernel-source RPM, I guess the OFED install.sh should check
> for that RPM.
>
> svbu-qa-opteron-1:~ # uname -a
> Linux svbu-qa-opteron-1 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC
> 2006 i68
> 6 athlon i386 GNU/Linux
> svbu-qa-opteron-1:~ # rpm -qa | fgrep kernel
> kernel-source-2.6.16.21-0.8
> kernel-smp-2.6.16.21-0.8
> kernel-ib-1.1-2.6.16.21_0.8_smp
> kernel-ib-devel-1.1-2.6.16.21_0.8_smp
> svbu-qa-opteron-1:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
> .config Makefile arch include2
> .kernelrelease Module.symvers include scripts
>
> Scott Weitzenkamp
> SQA and Release Manager
> Server Virtualization Business Unit
> Cisco Systems
>
>
>
>> -----Original Message-----
>> From: openib-general-bounces at openib.org
>> [mailto:openib-general-bounces at openib.org] On Behalf Of Chris Dennett
>> Sent: Tuesday, October 17, 2006 12:46 PM
>> To: openfabrics-ewg at openib.org; openib-general at openib.org
>> Subject: [openib-general] OFED 1.1-RC7 build problem on SLES10
>>
>> I've been trying to install OFED 1.1 RC7 on an x86 server
>> with a fresh install
>> of SLES10 (32-bit). It errors out when trying to build the
>> kernel modules.
>> I've included what I think are the relevant log messages
>> below. I've tried
>> installing everything (minus iser and tvflash) or just the
>> modules needed for
>> SRP. I've installed 1.1 RC7 successfully on other RedHat
>> servers without any
>> problems. I am installing as root. Any help would be appreciated.
>>
>> Thanks.
>>
>> -Chris
>>
>> ==============================================
>> + make kernel
>> Building kernel modules
>> Kernel version: 2.6.16.21-0.8-smp
>> Modules directory: //lib/modules/2.6.16.21-0.8-smp
>> Kernel sources: /lib/modules/2.6.16.21-0.8-smp/build
>> env EXTRA_CFLAGS=" -I/var/tmp/OFEDRPM/BUILD/openib-1.1/include
>> -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
>>
>> -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/ulp/ipoib \
>>
>> -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/debug" \
>> make -C /lib/modules/2.6.16.21-0.8-smp/build
>> SUBDIRS="/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband"
>> KERNELRELEASE=2.6.16.21-0.8-smp \
>> EXTRAVERSION=.21-0.8-smp V=1 \
>> CONFIG_INFINIBAND=m \
>> CONFIG_INFINIBAND_IPOIB=m \
>> CONFIG_INFINIBAND_SDP= \
>> CONFIG_INFINIBAND_SRP=m \
>> CONFIG_INFINIBAND_USER_MAD=m \
>> CONFIG_INFINIBAND_USER_ACCESS=m \
>> CONFIG_INFINIBAND_ADDR_TRANS=y \
>> CONFIG_INFINIBAND_MTHCA=m \
>> CONFIG_INFINIBAND_IPOIB_DEBUG=y \
>> CONFIG_INFINIBAND_ISER= \
>> CONFIG_INFINIBAND_EHCA= \
>> CONFIG_INFINIBAND_RDS= \
>> CONFIG_INFINIBAND_RDS_DEBUG= \
>> CONFIG_INFINIBAND_IPOIB_DEBUG_DATA= \
>> CONFIG_INFINIBAND_SDP_SEND_ZCOPY= \
>> CONFIG_INFINIBAND_SDP_RECV_ZCOPY= \
>> CONFIG_INFINIBAND_SDP_DEBUG= \
>> CONFIG_INFINIBAND_SDP_DEBUG_DATA= \
>> CONFIG_INFINIBAND_IPATH= \
>> CONFIG_INFINIBAND_MTHCA_DEBUG=y \
>> CONFIG_INFINIBAND_MADEYE= \
>> LINUXINCLUDE='-I/var/tmp/OFEDRPM/BUILD/openib-1.1/include \
>>
>> -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
>> -Iinclude \
>> $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
>> -include include/linux/autoconf.h \
>> -include
>> /var/tmp/OFEDRPM/BUILD/openib-1.1/include/linux/autoconf.h \
>> ' \
>> modules
>> make[1]: Entering directory
>> `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
>> make[1]: *** No rule to make target `modules'. Stop.
>> make[1]: Leaving directory `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
>> make: *** [kernel] Error 2
>> error: Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
>>
>>
>> RPM build errors:
>> user vlad does not exist - using root
>> group mtl does not exist - using root
>> user vlad does not exist - using root
>> group mtl does not exist - using root
>> Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
>> ERROR: Failed executing "rpmbuild --rebuild --define '_topdir
>> /var/tmp/OFEDRPM' --define '_prefix /usr/local/ofed' --define
>> 'build_root
>> /var/tmp/OFED' --define 'configure_options --with-libibcommon
>> --with-libibmad
>> --with-libibumad --with-libibverbs --with-libmthca --with-opensm
>> --with-librdmacm --with-openib-diags --with-srptools --with-mstflint
>> --with-perftest --with-ipoib-mod --with-mthca-mod --with-srp-mod
>> --with-core-mod --with-user_mad-mod --with-user_access-mod
>> --with-addr_trans-mod' --define 'configure_options32 %{nil}' --define
>> 'KVERSION 2.6.16.21-0.8-smp' --define 'KSRC
>> /lib/modules/2.6.16.21-0.8-smp/build' --define
>> 'build_kernel_ib 1' --define
>> 'build_kernel_ib_devel 0' --define 'NETWORK_CONF_DIR
>> /etc/sysconfig/network'
>> --define 'modprobe_update 1' --define 'include_ipoib_conf 0' --define
>> 'build_32bit 0' /root/OFED-1.1-rc7/SRPMS/openib-1.1-0.src.rpm"
>>
>> ===================================================
>>
>> smx32:~ # uname -a
>> Linux linux-yeez 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39
>> UTC 2006 i686
>> i686 i386 GNU/Linux
>> smx32:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
>> Module.symvers
>>
>>
>>
>> --
>> Chris Dennett
>> Design Engineer
>> Texas Memory Systems, Inc.
>> 713-266-3200 x430
>> Chris.Dennett at texmemsys.com
>>
>>
>> _______________________________________________
>> openib-general mailing list
>> openib-general at openib.org
>> http://openib.org/mailman/listinfo/openib-general
>>
>> To unsubscribe, please visit
>> http://openib.org/mailman/listinfo/openib-general
>>
>>
>
> _______________________________________________
> openib-general mailing list
> openib-general at openib.org
> http://openib.org/mailman/listinfo/openib-general
>
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
>
>
More information about the ewg
mailing list