[openfabrics-ewg] [openib-general] OFED 1.1-RC7 build problem on SLES10
Vladimir Sokolovsky
vlad at mellanox.co.il
Wed Oct 18 03:08:43 PDT 2006
Hi,
OFED installation script check that the directory
/lib/modules/`uname -r`/build/ and the file
/lib/modules/`uname -r`/build/Makefle exist.
It does not check for kernel-source RPM because of kernels from
kernel.org support.
--
Regards,
Vladimir
On Tue, 2006-10-17 at 15:45 -0700, Scott Weitzenkamp (sweitzen) wrote:
> You need the kernel-source RPM, I guess the OFED install.sh should check
> for that RPM.
>
> svbu-qa-opteron-1:~ # uname -a
> Linux svbu-qa-opteron-1 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39 UTC
> 2006 i68
> 6 athlon i386 GNU/Linux
> svbu-qa-opteron-1:~ # rpm -qa | fgrep kernel
> kernel-source-2.6.16.21-0.8
> kernel-smp-2.6.16.21-0.8
> kernel-ib-1.1-2.6.16.21_0.8_smp
> kernel-ib-devel-1.1-2.6.16.21_0.8_smp
> svbu-qa-opteron-1:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
> .config Makefile arch include2
> .kernelrelease Module.symvers include scripts
>
> Scott Weitzenkamp
> SQA and Release Manager
> Server Virtualization Business Unit
> Cisco Systems
>
>
> > -----Original Message-----
> > From: openib-general-bounces at openib.org
> > [mailto:openib-general-bounces at openib.org] On Behalf Of Chris Dennett
> > Sent: Tuesday, October 17, 2006 12:46 PM
> > To: openfabrics-ewg at openib.org; openib-general at openib.org
> > Subject: [openib-general] OFED 1.1-RC7 build problem on SLES10
> >
> > I've been trying to install OFED 1.1 RC7 on an x86 server
> > with a fresh install
> > of SLES10 (32-bit). It errors out when trying to build the
> > kernel modules.
> > I've included what I think are the relevant log messages
> > below. I've tried
> > installing everything (minus iser and tvflash) or just the
> > modules needed for
> > SRP. I've installed 1.1 RC7 successfully on other RedHat
> > servers without any
> > problems. I am installing as root. Any help would be appreciated.
> >
> > Thanks.
> >
> > -Chris
> >
> > ==============================================
> > + make kernel
> > Building kernel modules
> > Kernel version: 2.6.16.21-0.8-smp
> > Modules directory: //lib/modules/2.6.16.21-0.8-smp
> > Kernel sources: /lib/modules/2.6.16.21-0.8-smp/build
> > env EXTRA_CFLAGS=" -I/var/tmp/OFEDRPM/BUILD/openib-1.1/include
> > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
> >
> > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/ulp/ipoib \
> >
> > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/debug" \
> > make -C /lib/modules/2.6.16.21-0.8-smp/build
> > SUBDIRS="/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband"
> > KERNELRELEASE=2.6.16.21-0.8-smp \
> > EXTRAVERSION=.21-0.8-smp V=1 \
> > CONFIG_INFINIBAND=m \
> > CONFIG_INFINIBAND_IPOIB=m \
> > CONFIG_INFINIBAND_SDP= \
> > CONFIG_INFINIBAND_SRP=m \
> > CONFIG_INFINIBAND_USER_MAD=m \
> > CONFIG_INFINIBAND_USER_ACCESS=m \
> > CONFIG_INFINIBAND_ADDR_TRANS=y \
> > CONFIG_INFINIBAND_MTHCA=m \
> > CONFIG_INFINIBAND_IPOIB_DEBUG=y \
> > CONFIG_INFINIBAND_ISER= \
> > CONFIG_INFINIBAND_EHCA= \
> > CONFIG_INFINIBAND_RDS= \
> > CONFIG_INFINIBAND_RDS_DEBUG= \
> > CONFIG_INFINIBAND_IPOIB_DEBUG_DATA= \
> > CONFIG_INFINIBAND_SDP_SEND_ZCOPY= \
> > CONFIG_INFINIBAND_SDP_RECV_ZCOPY= \
> > CONFIG_INFINIBAND_SDP_DEBUG= \
> > CONFIG_INFINIBAND_SDP_DEBUG_DATA= \
> > CONFIG_INFINIBAND_IPATH= \
> > CONFIG_INFINIBAND_MTHCA_DEBUG=y \
> > CONFIG_INFINIBAND_MADEYE= \
> > LINUXINCLUDE='-I/var/tmp/OFEDRPM/BUILD/openib-1.1/include \
> >
> > -I/var/tmp/OFEDRPM/BUILD/openib-1.1/drivers/infiniband/include \
> > -Iinclude \
> > $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
> > -include include/linux/autoconf.h \
> > -include
> > /var/tmp/OFEDRPM/BUILD/openib-1.1/include/linux/autoconf.h \
> > ' \
> > modules
> > make[1]: Entering directory
> > `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
> > make[1]: *** No rule to make target `modules'. Stop.
> > make[1]: Leaving directory `/usr/src/linux-2.6.16.21-0.8-obj/i386/smp'
> > make: *** [kernel] Error 2
> > error: Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
> >
> >
> > RPM build errors:
> > user vlad does not exist - using root
> > group mtl does not exist - using root
> > user vlad does not exist - using root
> > group mtl does not exist - using root
> > Bad exit status from /var/tmp/rpm-tmp.92052 (%install)
> > ERROR: Failed executing "rpmbuild --rebuild --define '_topdir
> > /var/tmp/OFEDRPM' --define '_prefix /usr/local/ofed' --define
> > 'build_root
> > /var/tmp/OFED' --define 'configure_options --with-libibcommon
> > --with-libibmad
> > --with-libibumad --with-libibverbs --with-libmthca --with-opensm
> > --with-librdmacm --with-openib-diags --with-srptools --with-mstflint
> > --with-perftest --with-ipoib-mod --with-mthca-mod --with-srp-mod
> > --with-core-mod --with-user_mad-mod --with-user_access-mod
> > --with-addr_trans-mod' --define 'configure_options32 %{nil}' --define
> > 'KVERSION 2.6.16.21-0.8-smp' --define 'KSRC
> > /lib/modules/2.6.16.21-0.8-smp/build' --define
> > 'build_kernel_ib 1' --define
> > 'build_kernel_ib_devel 0' --define 'NETWORK_CONF_DIR
> > /etc/sysconfig/network'
> > --define 'modprobe_update 1' --define 'include_ipoib_conf 0' --define
> > 'build_32bit 0' /root/OFED-1.1-rc7/SRPMS/openib-1.1-0.src.rpm"
> >
> > ===================================================
> >
> > smx32:~ # uname -a
> > Linux linux-yeez 2.6.16.21-0.8-smp #1 SMP Mon Jul 3 18:25:39
> > UTC 2006 i686
> > i686 i386 GNU/Linux
> > smx32:~ # ls /usr/src/linux-2.6.16.21-0.8-obj/i386/smp
> > Module.symvers
> >
> >
> >
> > --
> > Chris Dennett
> > Design Engineer
> > Texas Memory Systems, Inc.
> > 713-266-3200 x430
> > Chris.Dennett at texmemsys.com
> >
> >
> > _______________________________________________
> > openib-general mailing list
> > openib-general at openib.org
> > http://openib.org/mailman/listinfo/openib-general
> >
> > To unsubscribe, please visit
> > http://openib.org/mailman/listinfo/openib-general
> >
>
> _______________________________________________
> openfabrics-ewg mailing list
> openfabrics-ewg at openib.org
> http://openib.org/mailman/listinfo/openfabrics-ewg
More information about the ewg
mailing list