[ewg] [patch OFED-1.4]IB\ehca: update ehca release notes

[Stefan Roscher]

This patch updates the ehca release notes for OFED-1.4

Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com>
---

diff -Nurp docs.old/ehca_release_notes.txt docs.new/ehca_release_notes.txt
--- docs.old/ehca_release_notes.txt	2008-12-08 13:29:16.000000000 +0100
+++ docs.new/ehca_release_notes.txt	2008-12-08 13:29:28.000000000 +0100
@@ -24,18 +24,37 @@ In order to set ehca parameters, add the
 
 whereby <parameter> is one of the following items:
 - debug_level     debug level (0: no debug traces (default), 1: with debug traces)
-- nr_ports        number of connected ports (2: (default), -1: autodetect mdoe)
 - port_act_time   time to wait for port activation (default: 30 sec)
 - scaling_code    scaling code (0: disable (default), 1: enable)
+- open_aqp1       Open AQP1 on startup (default: no) (bool)
+- hw_level        Hardware level (0: autosensing (default), 0x10..0x14: eHCA, 0x20..0x23: eHCA2) (int)
+- nr_ports        number of connected ports (-1: autodetect, 1: port one only, 2: two ports (default) (int)
+- use_hp_mr       Use high performance MRs (default: no) (bool)
+- poll_all_eqs    Poll all event queues periodically (default: yes) (bool)
+- static_rate     Set permanent static rate (default: no static rate) (int)
+- lock_hcalls     Serialize all hCalls made by the driver (default: autodetect) (bool)
+- number_of_cqs   Max number of CQs which can be allocated (default: autodetect) (int)
+- number_of_qps   Max number of QPs which can be allocated (default: autodetect) (int)
 
 New Features
 ------------
-- Port connection autodetect mode
-- eHCA2 only:
-  * Large page MRs
-  * Shared receive QPs
-  * Low latency QPs
-  * 4k MTU
+- Flush error completion support
+
+Fixed Bugs ofed-1.4
+---------------------
+- Reject send work requests only for RESET, INIT and RTR state
+- Reject receive work requests if QP is in RESET state
+- In case of lost interrupts, trigger EOI to reenable interrupts
+- Filter PATH_MIG events if QP was never armed
+- Release mutex in error path of alloc_small_queue_page()
+- Check idr_find() return value
+- Discard double CQE for one WR
+- Generate flush status CQ entries
+- Don't allow creating UC QP with SRQ
+- Fix reported max number of QPs and CQs in systems with >1 adapter
+- Reject dynamic memory add/remove when ehca adapter is present
+- Remove reference to special QP in case of port activation failure
+- Fix locking for shca_list_lock
 
 Fixed Bugs ofed-1.3.1
 ---------------------
@@ -58,14 +77,11 @@ Fixed Bugs ofed-1.3
 
 Available backports
 -------------------
-- RedHat EL4 up5: 2.6.9-42.ELsmp
-- RedHat EL4 up6: 2.6.9-65.ELsmp
-- RedHat EL5: 2.6.18-8.ELsmp
 - RedHat EL5 up1: 2.6.18-53.ELsmp
-- SLES10: 2.6.16.21-0.8-smp
+- RedHat EL5 up2: 2.6.18-92.ELsmp
 - SLES10SP1: 2.6.16-53-0.16-smp
 - SLES10SP2: 2.6.16-60
-- kernel.org: 2.6.19-24.x
+- kernel.org: 2.6.24-27
 
 Known Issues
 ------------
@@ -76,5 +92,5 @@ strongly recommended to set option nr_po
 2. Furthermore the port(s) needs to be connected to an active switch port while
 loading the ehca device driver.
 
-3. RedHat EL5 2.6.18-8.ELsmp
-   User space not supported
+3. Dynamic memory operations are not supported with ehca
+