[ewg] ibv_devinfo on 1.4.1-rc4 shows only 1 port on HCA, two HCAs installed
Pradeep Satyanarayana
pradeep at us.ibm.com
Mon May 4 12:42:43 PDT 2009
Hello Mike,
Could this be a firmware issue? I presume you are using ConnectX -is that
correct?
We have not seen this with Rhel5.3/OFED-1.4.1 rc4 in our tests.
Pradeep
pradeep at us.ibm.com
Mike
Aho/Rochester/IBM
@IBMUS To
Sent by: ewg at lists.openfabrics.org
ewg-bounces at lists cc
.openfabrics.org
Subject
[ewg] ibv_devinfo on 1.4.1-rc4
05/04/2009 12:06 shows only 1 port on HCA, two
PM HCAs installed
We have 1.4.1-rc4 installed on RHEL 5. We have two Mellanox DDR two-port
cards installed. ibv_devinfo only shows the info on the first port of each
HCA when run. Please advise if this is a change in how ibv_devinfo works.
If not, any info I need to send along as a bugzilla?
Thanks.
Mike Aho
_______________________________________________
ewg mailing list
ewg at lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20090504/0c270eb3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: graycol.gif
Type: image/gif
Size: 105 bytes
Desc: not available
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20090504/0c270eb3/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pic03516.gif
Type: image/gif
Size: 1255 bytes
Desc: not available
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20090504/0c270eb3/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ecblank.gif
Type: image/gif
Size: 45 bytes
Desc: not available
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20090504/0c270eb3/attachment-0002.gif>
More information about the ewg
mailing list