Pradeep and I discussed this. The firmware is 2.3 on the card and will be
moved to the most current level.
Best Regards,
Mike Aho
From: Pradeep Satyanarayana/Beaverton/IBM
To: Mike Aho/Rochester/IBM at IBMUS
Cc: ewg at lists.openfabrics.org, ewg-bounces at lists.openfabrics.org
Date: 05/04/2009 02:43 PM
Subject: Re: [ewg] ibv_devinfo on 1.4.1-rc4 shows only 1 port on HCA, two HCAs installed
Hello Mike,
Could this be a firmware issue? I presume you are using ConnectX -is that
correct?
We have not seen this with Rhel5.3/OFED-1.4.1 rc4 in our tests.
Pradeep
pradeep at us.ibm.com
Mike
Aho/Rochester/IBM
@IBMUS To
Sent by: ewg at lists.openfabrics.org
ewg-bounces at lists cc
.openfabrics.org
Subject
[ewg] ibv_devinfo on 1.4.1-rc4
05/04/2009 12:06 shows only 1 port on HCA, two
PM HCAs installed
We have 1.4.1-rc4 installed on RHEL 5. We have two Mellanox DDR two-port
cards installed. ibv_devinfo only shows the info on the first port of each
HCA when run. Please advise if this is a change in how ibv_devinfo works.
If not, any info I need to send along as a bugzilla?
Thanks.
Mike Aho
_______________________________________________
ewg mailing list
ewg at lists.openfabrics.org
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg