[ewg] OpenSM 3.3.16 will not start

[Mads Boye]

Hi Hal.
Thank you for the clarification. The admin nodes must be connected to the infiniband network aswell I assume?

De bedste hilsner / Best regards,

Mads Boye.

> -----Original Message-----
> From: Hal Rosenstock [mailto:hal at dev.mellanox.co.il]
> Sent: 12. april 2013 16:15
> To: Mads Boye; ewg at lists.openfabrics.org
> Subject: Re: SV: [ewg] OpenSM 3.3.16 will not start
> 
> Hi Mads,
> 
> On 4/12/2013 10:09 AM, Mads Boye wrote:
> > Hi Hal.
> > Yes, maybe i understood it incorrectly, but doesn't all nodes need the
> OpenSM running, in order for working IB?
> 
> To clarify, a subnet needs to have at least 1 SM running. It's best if OpenSM
> runs on a small number of admin nodes which are always present.
> 
> -- Hal
> 
> > The PXE booting is happening over an admin ethernet.
> 
> > Mads Boye
> > HPC & VMware Administrator  |  Information Service Technology
> >
> > Phone: (+45) 9940 3453  | Email:mb at ist.aau.dk |
> > Webhomes.ist.aau.dk/mb/ Aalborg University | Selma Lagerløfs Vej 300 -
> > 4.2.46 | Aalborg East |
> >
> > ________________________________________
> > Fra: Hal Rosenstock [hal at dev.mellanox.co.il]
> > Sendt: 12. april 2013 16:04
> > Til: Mads Boye
> > Cc: ewg at lists.openfabrics.org
> > Emne: Re: [ewg] OpenSM 3.3.16 will not start
> >
> > Hi again Mads,
> >
> > On 4/12/2013 2:25 AM, Mads Boye wrote:
> >> Our worker nodes PXE boots from an image on a local administration
> >> machine. OpenSM has been compiled and installed into this image directly
> with no errors durring ./configure , make , or make install.
> >
> > Are you saying that worker nodes run OpenSM ?
> >
> > Is the PXE booting over IB (or some other network) ?
> >
> > -- Hal
> >