[ewg] OpenSM 3.3.16 will not start

Hal Rosenstock hal at dev.mellanox.co.il
Fri Apr 12 08:29:25 PDT 2013


On 4/12/2013 11:17 AM, Mads Boye wrote:
> Hi Hal.
> Thank you for the clarification. The admin nodes must be connected to the infiniband network aswell I assume?

Yes.

-- Hal

> 
> De bedste hilsner / Best regards,
> 
> Mads Boye.
> 
>> -----Original Message-----
>> From: Hal Rosenstock [mailto:hal at dev.mellanox.co.il]
>> Sent: 12. april 2013 16:15
>> To: Mads Boye; ewg at lists.openfabrics.org
>> Subject: Re: SV: [ewg] OpenSM 3.3.16 will not start
>>
>> Hi Mads,
>>
>> On 4/12/2013 10:09 AM, Mads Boye wrote:
>>> Hi Hal.
>>> Yes, maybe i understood it incorrectly, but doesn't all nodes need the
>> OpenSM running, in order for working IB?
>>
>> To clarify, a subnet needs to have at least 1 SM running. It's best if OpenSM
>> runs on a small number of admin nodes which are always present.
>>
>> -- Hal
>>
>>> The PXE booting is happening over an admin ethernet.
>>
>>> Mads Boye
>>> HPC & VMware Administrator  |  Information Service Technology
>>>
>>> Phone: (+45) 9940 3453  | Email:mb at ist.aau.dk |
>>> Webhomes.ist.aau.dk/mb/ Aalborg University | Selma Lagerløfs Vej 300 -
>>> 4.2.46 | Aalborg East |
>>>
>>> ________________________________________
>>> Fra: Hal Rosenstock [hal at dev.mellanox.co.il]
>>> Sendt: 12. april 2013 16:04
>>> Til: Mads Boye
>>> Cc: ewg at lists.openfabrics.org
>>> Emne: Re: [ewg] OpenSM 3.3.16 will not start
>>>
>>> Hi again Mads,
>>>
>>> On 4/12/2013 2:25 AM, Mads Boye wrote:
>>>> Our worker nodes PXE boots from an image on a local administration
>>>> machine. OpenSM has been compiled and installed into this image directly
>> with no errors durring ./configure , make , or make install.
>>>
>>> Are you saying that worker nodes run OpenSM ?
>>>
>>> Is the PXE booting over IB (or some other network) ?
>>>
>>> -- Hal
>>>
> 
> 




More information about the ewg mailing list