[ewg] Fwd: [ANNOUNCE] libcxgb4-1.3.2 released.

[Steve Wise]

Vlad, please pull libcxgb4-1.3.2 into OFED-3.12.

Thanks,

Steve.


-------- Original Message --------
Subject: 	[ewg] [ANNOUNCE] libcxgb4-1.3.2 released.
Date: 	Fri, 21 Feb 2014 10:25:10 -0600
From: 	Steve Wise <swise at opengridcomputing.com>
To: 	linux-rdma at vger.kernel.org <linux-rdma at vger.kernel.org>
CC: 	ewg at lists.openfabrics.org <ewg at lists.openfabrics.org>, Hariprasad S 
<hariprasad at chelsio.com>



The libcxgb4 package contains a userspace driver for Chelsio T4 and T5
iWARP RNICs.  It is a plug-in module for libibverbs that allows programs
to use Chelsio hardware directly from userspace.

A new release is available from:

http://www.openfabrics.org/downloads/cxgb4/libcxgb4-1.3.2.tar.gz

with an md5sum of:

d6e9b98f0d58dff639662eae9866541b

The git tree is available at:

git://www.openfabrics.org/~swise/libcxgb4

The tag is v1.3.2

Shortlog from v1.3.1:

Steve Wise (16):
       T4 onchip workaround: do the 16 4B MA writes just before DB ring.
       Fix DEBUG code in c4iw_flush_hw_cq().
       DB Drop Avoidance, Version 2.
       unmap status page when freeing the context.
       never consume a pending wr in sq flush.
       iw_cxgb4/libcxgb4: swsq "signaled" state needs to mind sq_sig_all.
       Remove dead raw qp code.
       Remove dead SIM code.
       Add common device id table and chip types.
       Refresh t4 fw/hw reg files.
       Update copyrights.
       Call rmb() after reading valid gen bit.
       Call wc_wmb() needed after DB writes.
       Use V_PIDX_T5() for T5 devices in ring_db funcs.
       Fixed compilation error with debug enabled.
       Spin release 1.3.2.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20140221/27527333/attachment.html>