[ewg] Fwd: [ANNOUNCE] libcxgb4-1.3.2 released.

[Vladimir Sokolovsky]

On 02/21/2014 06:26 PM, Steve Wise wrote:
> Vlad, please pull libcxgb4-1.3.2 into OFED-3.12.
>
> Thanks,
>
> Steve.

Done,

Regards,
Vladimir

>
>
> -------- Original Message --------
> Subject: 	[ewg] [ANNOUNCE] libcxgb4-1.3.2 released.
> Date: 	Fri, 21 Feb 2014 10:25:10 -0600
> From: 	Steve Wise <swise at opengridcomputing.com>
> To: 	linux-rdma at vger.kernel.org <linux-rdma at vger.kernel.org>
> CC: 	ewg at lists.openfabrics.org <ewg at lists.openfabrics.org>, Hariprasad S <hariprasad at chelsio.com>
>
>
>
> The libcxgb4 package contains a userspace driver for Chelsio T4 and T5
> iWARP RNICs.  It is a plug-in module for libibverbs that allows programs
> to use Chelsio hardware directly from userspace.
>
> A new release is available from:
>
> http://www.openfabrics.org/downloads/cxgb4/libcxgb4-1.3.2.tar.gz
>
> with an md5sum of:
>
> d6e9b98f0d58dff639662eae9866541b
>
> The git tree is available at:
>
> git://www.openfabrics.org/~swise/libcxgb4
>
> The tag is v1.3.2
>
> Shortlog from v1.3.1:
>
> Steve Wise (16):
>        T4 onchip workaround: do the 16 4B MA writes just before DB ring.
>        Fix DEBUG code in c4iw_flush_hw_cq().
>        DB Drop Avoidance, Version 2.
>        unmap status page when freeing the context.
>        never consume a pending wr in sq flush.
>        iw_cxgb4/libcxgb4: swsq "signaled" state needs to mind sq_sig_all.
>        Remove dead raw qp code.
>        Remove dead SIM code.
>        Add common device id table and chip types.
>        Refresh t4 fw/hw reg files.
>        Update copyrights.
>        Call rmb() after reading valid gen bit.
>        Call wc_wmb() needed after DB writes.
>        Use V_PIDX_T5() for T5 devices in ring_db funcs.
>        Fixed compilation error with debug enabled.
>        Spin release 1.3.2.
>
>