[ewg] OFED 4.17 latest build error on SLES15

[Vladimir Sokolovsky]

On 08/15/2018 07:18 PM, Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC] wrote:
> Hi Vlad,
>
> Were you able to figure out what's wrong? Thanks.
>
> -jeff

Not yet,
I have older kernel: 4.12.14-16-default vs yours 4.12.14-23-default but 
it is hard to believe that APIs were changed.
Can you send me config.log from 
/var/tmp/OFED_topdir/BUILD/compat-rdma-4.17/compat directory?
Meanwhile, I will try to get the newer kernel.

Regards,
Vladimir

> ------------------------------------------------------------------------
> *From:* ewg [ewg-bounces at lists.openfabrics.org] on behalf of Becker, 
> Jeffrey C. (ARC-TN)[InuTeq, LLC] [jeffrey.c.becker at nasa.gov]
> *Sent:* Tuesday, August 14, 2018 11:57 AM
> *To:* Vladimir Sokolovsky
> *Cc:* ewg at lists.openfabrics.org
> *Subject:* Re: [ewg] OFED 4.17 latest build error on SLES15
>
> Hi Vlad,
>
> PSB
> ------------------------------------------------------------------------
> *From:* Vladimir Sokolovsky [vlad at dev.mellanox.co.il]
> *Sent:* Tuesday, August 14, 2018 9:43 AM
> *To:* Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC]
> *Cc:* ewg at lists.openfabrics.org
> *Subject:* Re: OFED 4.17 latest build error on SLES15
>
> On 08/14/2018 12:18 AM, Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC] wrote:
>> Hi Vlad,
>>
>> ------------------------------------------------------------------------
>> *From:* Vladimir Sokolovsky [vlad at dev.mellanox.co.il]
>> *Sent:* Monday, August 13, 2018 1:33 PM
>> *To:* Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC]
>> *Cc:* ewg at lists.openfabrics.org
>> *Subject:* Re: OFED 4.17 latest build error on SLES15
>>
>> On 08/13/2018 08:23 PM, Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC] wrote:
>>> It seems the following backport code in 
>>> /var/tmp/OFED_topdir/BUILD/compat-rdma-4.17/drivers/infiniband/ulp/ipoib/ipoib_main.c 
>>> didn't work as expected:
>>>
>>> #ifdef HAVE_INET_CONFIRM_ADDR_EXPORTED
>>> #ifdef HAVE_INET_CONFIRM_ADDR_5_PARAMS
>>>                 ret_addr = inet_confirm_addr(net, in_dev, 0,
>>> addr_in->sin_addr.s_addr,
>>>                                              RT_SCOPE_HOST);
>>> #else
>>>                 ret_addr = inet_confirm_addr(in_dev, 0,
>>> addr_in->sin_addr.s_addr,
>>>                                              RT_SCOPE_HOST);
>>> #endif
>>> #else
>>>                 ret_addr = confirm_addr_indev(in_dev, 0,
>>> addr_in->sin_addr.s_addr,
>>>                                               RT_SCOPE_HOST);
>>> #endif
>>
>> >> Hi Jeff,
>> >> On SLES15 (4.12.14-16-default) I have in compat/config.h:
>> >> #define HAVE_INET_CONFIRM_ADDR_5_PARAMS 1
>> >> #define HAVE_INET_CONFIRM_ADDR_EXPORTED 1
>> >>
>> >> So, it should use the topmost inet_confirm_addr and not 
>> confirm_addr_indev.
>> >> Did you run configure script?
>>
>> I used install.pl in the latest.tgz top level directory. I assume 
>> that runs configure as a first step for compat_rdma? Thanks.
>>
>> -jeff
>>
>> >> Regards,
>> >> Vladimir
>
> >> Hi Jeff,
> >> Please attach compat-rdma.rpmbuild.log (ls -ltr 
> /tmp/OFED*/compat-rdma.rpmbuild.log)
>
> Attached. Thanks.
>
> -jeff
>
> >>Regards,
> ??Vladimir
>
>
>>
>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC]
>>> *Sent:* Monday, August 13, 2018 10:00 AM
>>> *To:* Vladimir Sokolovsky ‎[vlad at dev.mellanox.co.il]‎
>>> *Cc:* ewg at lists.openfabrics.org
>>> *Subject:* OFED 4.17 latest build error on SLES15
>>>
>>> Hi Vlad,
>>>
>>> I just tried to build on SLES15 and got the following error:
>>>
>>> /var/tmp/OFED_topdir/BUILD/compat-rdma-4.17/drivers/infiniband/ulp/ipoib/ipoib_main.c: 
>>> In function ‘ipoib_is_dev_match_addr_rcu’:
>>> /var/tmp/OFED_topdir/BUILD/compat-rdma-4.17/drivers/infiniband/ulp/ipoib/ipoib_main.c:355:14: 
>>> error: implicit declaration of function ‘confirm_addr_indev’ 
>>> [-Werror=implicit-function-declaration]
>>>    ret_addr = confirm_addr_indev(in_dev, 0,
>>>               ^~~~~~~~~~~~~~~~~~
>>>
>>> Is the backport for SLES15 missing something? Thanks.
>>>
>>> -jeff
>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20180815/fe33b21d/attachment-0001.html>