[ewg] OFED 4.17 latest build error on SLES15

[Vladimir Sokolovsky]

On 08/15/2018 09:47 PM, Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC] wrote:
> Hi Vlad,
>

Hi Jeff,
It works for me with 4.12.14-23-default kernel as well 
(OFED-4.17-20180815-1126).
Maybe you used some old OFED version. Please try the latest one.
If it still fails check that the kernel headers are authentic:

# rpm -qa | grep kernel
# rpm -qa | grep kernel | xargs rpm -q --verify

Regards,
Vladimir

> ------------------------------------------------------------------------
> *From:* Vladimir Sokolovsky [vlad at dev.mellanox.co.il]
> *Sent:* Wednesday, August 15, 2018 11:11 AM
> *To:* Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC]
> *Cc:* ewg at lists.openfabrics.org
> *Subject:* Re: OFED 4.17 latest build error on SLES15
>
> On 08/15/2018 07:18 PM, Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC] wrote:
>> Hi Vlad,
>>
>> Were you able to figure out what's wrong? Thanks.
>>
>> -jeff
>
> >>Not yet,
> >>I have older kernel: 4.12.14-16-default vs yours 4.12.14-23-default 
> but it is hard to believe that APIs >>were changed.
> >>Can you send me config.log from 
> /var/tmp/OFED_topdir/BUILD/compat-rdma-4.17/compat directory?
>
> Attached. Thanks.
>
> -jeff
>
> >>Meanwhile, I will try to get the newer kernel.
>
> Regards,
> Vladimir
>
>> ------------------------------------------------------------------------
>> *From:* ewg [ewg-bounces at lists.openfabrics.org] on behalf of Becker, 
>> Jeffrey C. (ARC-TN)[InuTeq, LLC] [jeffrey.c.becker at nasa.gov]
>> *Sent:* Tuesday, August 14, 2018 11:57 AM
>> *To:* Vladimir Sokolovsky
>> *Cc:* ewg at lists.openfabrics.org
>> *Subject:* Re: [ewg] OFED 4.17 latest build error on SLES15
>>
>> Hi Vlad,
>>
>> PSB
>> ------------------------------------------------------------------------
>> *From:* Vladimir Sokolovsky [vlad at dev.mellanox.co.il]
>> *Sent:* Tuesday, August 14, 2018 9:43 AM
>> *To:* Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC]
>> *Cc:* ewg at lists.openfabrics.org
>> *Subject:* Re: OFED 4.17 latest build error on SLES15
>>
>> On 08/14/2018 12:18 AM, Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC] wrote:
>>> Hi Vlad,
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Vladimir Sokolovsky [vlad at dev.mellanox.co.il]
>>> *Sent:* Monday, August 13, 2018 1:33 PM
>>> *To:* Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC]
>>> *Cc:* ewg at lists.openfabrics.org
>>> *Subject:* Re: OFED 4.17 latest build error on SLES15
>>>
>>> On 08/13/2018 08:23 PM, Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC] wrote:
>>>> It seems the following backport code in 
>>>> /var/tmp/OFED_topdir/BUILD/compat-rdma-4.17/drivers/infiniband/ulp/ipoib/ipoib_main.c 
>>>> didn't work as expected:
>>>>
>>>> #ifdef HAVE_INET_CONFIRM_ADDR_EXPORTED
>>>> #ifdef HAVE_INET_CONFIRM_ADDR_5_PARAMS
>>>>                 ret_addr = inet_confirm_addr(net, in_dev, 0,
>>>> addr_in->sin_addr.s_addr,
>>>>                                              RT_SCOPE_HOST);
>>>> #else
>>>>                 ret_addr = inet_confirm_addr(in_dev, 0,
>>>> addr_in->sin_addr.s_addr,
>>>>                                              RT_SCOPE_HOST);
>>>> #endif
>>>> #else
>>>>                 ret_addr = confirm_addr_indev(in_dev, 0,
>>>> addr_in->sin_addr.s_addr,
>>>>                                               RT_SCOPE_HOST);
>>>> #endif
>>>
>>> >> Hi Jeff,
>>> >> On SLES15 (4.12.14-16-default) I have in compat/config.h:
>>> >> #define HAVE_INET_CONFIRM_ADDR_5_PARAMS 1
>>> >> #define HAVE_INET_CONFIRM_ADDR_EXPORTED 1
>>> >>
>>> >> So, it should use the topmost inet_confirm_addr and not 
>>> confirm_addr_indev.
>>> >> Did you run configure script?
>>>
>>> I used install.pl in the latest.tgz top level directory. I assume 
>>> that runs configure as a first step for compat_rdma? Thanks.
>>>
>>> -jeff
>>>
>>> >> Regards,
>>> >> Vladimir
>>
>> >> Hi Jeff,
>> >> Please attach compat-rdma.rpmbuild.log (ls -ltr 
>> /tmp/OFED*/compat-rdma.rpmbuild.log)
>>
>> Attached. Thanks.
>>
>> -jeff
>>
>> >>Regards,
>> ??Vladimir
>>
>>
>>>
>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> *From:* Becker, Jeffrey C. (ARC-TN)[InuTeq, LLC]
>>>> *Sent:* Monday, August 13, 2018 10:00 AM
>>>> *To:* Vladimir Sokolovsky ‎[vlad at dev.mellanox.co.il]‎
>>>> *Cc:* ewg at lists.openfabrics.org
>>>> *Subject:* OFED 4.17 latest build error on SLES15
>>>>
>>>> Hi Vlad,
>>>>
>>>> I just tried to build on SLES15 and got the following error:
>>>>
>>>> /var/tmp/OFED_topdir/BUILD/compat-rdma-4.17/drivers/infiniband/ulp/ipoib/ipoib_main.c: 
>>>> In function ‘ipoib_is_dev_match_addr_rcu’:
>>>> /var/tmp/OFED_topdir/BUILD/compat-rdma-4.17/drivers/infiniband/ulp/ipoib/ipoib_main.c:355:14: 
>>>> error: implicit declaration of function ‘confirm_addr_indev’ 
>>>> [-Werror=implicit-function-declaration]
>>>>    ret_addr = confirm_addr_indev(in_dev, 0,
>>>> ^~~~~~~~~~~~~~~~~~
>>>>
>>>> Is the backport for SLES15 missing something? Thanks.
>>>>
>>>> -jeff
>>>
>>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20180816/cf83bdd7/attachment.html>