[ewg] OFED-4.17 daily build status - 20180502-1140

[Kalderon, Michal]

Hi Vlad, Arlin,

Thanks for the daily build.
We currently have two issues with qedr:

  1.  We need to add newer FW
  2.  It seems that even though iWARP support exists in 4.17 and the code seems to be
part of compat-rdma that I extracted from your build, our iWARP devices are not detected.
we need to investigate this issue.

Arlin - do we need to open bugzilla's for these two issues ?
Vlad, are the development git's up to date?

Thanks,
Michal


From: ewg [mailto:ewg-bounces at lists.openfabrics.org] On Behalf Of Vladimir Sokolovsky
Sent: Friday, May 18, 2018 10:46 PM
To: Davis, Arlin R <arlin.r.davis at intel.com>; ewg at lists.openfabrics.org
Subject: Re: [ewg] OFED-4.17 daily build status - 20180502-1140

On 05/18/2018 08:38 PM, Davis, Arlin R wrote:

Hello Vlad,

Thanks for the first OFED 4.17 daily build. It seems to build and install fine on our servers with 4.17 RC5 kernel but we cannot run anything.

Here is a quick status for reference:

Console message: infiniband mlx5_0: ib_register_mad_agent: QP 0 not supported

Hi Arlin,
Please try to update HCA firmware to the latest version:
http://www.mellanox.com/downloads/firmware/fw-ConnectX4-rel-12_22_1002-MCX455A-ECA_Ax-UEFI-14.15.19-FlexBoot-3.5.403.bin.zip

Regards,
Vladimir




hca_id:  mlx5_0
               transport:                                          InfiniBand (0)
               fw_ver:                                              12.14.2036
               node_guid:                                        7cfe:9003:00d4:10d0
               sys_image_guid:                                             7cfe:9003:00d4:10d0
               vendor_id:                                         0x02c9
               vendor_part_id:                               4115
               hw_ver:                                             0x0
               board_id:                                           MT_2180110032
               phys_port_cnt:                                 1
                              port:      1
                                             state:                                   PORT_ACTIVE (4)
                                             max_mtu:                           4096 (5)
                                             active_mtu:                       1024 (3)
                                             sm_lid:                                0
                                             port_lid:                              0
                                             port_lmc:                           0x00
                                             link_layer:                          Ethernet


# ib_write_bw -a -d mlx5_0

Couldn't allocate MR
failed to create mr
Failed to create MR
Couldn't create IB resources

After a reboot, it hangs. We are investigating.

Thanks,

Arlin






_______________________________________________

ewg mailing list

ewg at lists.openfabrics.org<mailto:ewg at lists.openfabrics.org>

http://lists.openfabrics.org/mailman/listinfo/ewg

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20180604/7e588763/attachment.html>