[ewg] OFED-4.17 daily build status - 20180502-1140

[Vladimir Sokolovsky]

On 06/04/2018 12:32 PM, Kalderon, Michal wrote:
>
> Hi Vlad, Arlin,
>
> Thanks for the daily build.
>
> We currently have two issues with qedr:
>
>  1. We need to add newer FW
>  2. It seems that even though iWARP support exists in 4.17 and the
>     code seems to be
>     part of compat-rdma that I extracted from your build, our iWARP
>     devices are not detected.
>     we need to investigate this issue.
>
> Arlin – do we need to open bugzilla’s for these two issues ?
>
> Vlad, are the development git’s up to date?
>
> Thanks,
>
> Michal
>

Hi Michal,
If your FW is a part of the compat-rdma package and it was updated since 
linux-4.17-rc1 then the next build of OFED will include newer FW.

Regards,
Vladimir


> *From:*ewg [mailto:ewg-bounces at lists.openfabrics.org] *On Behalf Of 
> *Vladimir Sokolovsky
> *Sent:* Friday, May 18, 2018 10:46 PM
> *To:* Davis, Arlin R <arlin.r.davis at intel.com>; ewg at lists.openfabrics.org
> *Subject:* Re: [ewg] OFED-4.17 daily build status - 20180502-1140
>
> On 05/18/2018 08:38 PM, Davis, Arlin R wrote:
>
>     Hello Vlad,
>
>     Thanks for the first OFED 4.17 daily build. It seems to build and
>     install fine on our servers with 4.17 RC5 kernel but we cannot run
>     anything.
>
>     Here is a quick status for reference:
>
>     Console message: *infiniband mlx5_0: ib_register_mad_agent: QP 0
>     not supported*
>
>
> Hi Arlin,
> Please try to update HCA firmware to the latest version:
> http://www.mellanox.com/downloads/firmware/fw-ConnectX4-rel-12_22_1002-MCX455A-ECA_Ax-UEFI-14.15.19-FlexBoot-3.5.403.bin.zip
>
> Regards,
> Vladimir
>
>
>
>     hca_id: mlx5_0
>
>     transport: InfiniBand (0)
>
>     fw_ver: 12.14.2036
>
>     node_guid: 7cfe:9003:00d4:10d0
>
>     sys_image_guid: 7cfe:9003:00d4:10d0
>
>     vendor_id: 0x02c9
>
>     vendor_part_id:                               4115
>
>     hw_ver:                                             0x0
>
>     board_id: MT_2180110032
>
>     phys_port_cnt:                                 1
>
>     port:      1
>
>     state:                                   PORT_ACTIVE (4)
>
>     max_mtu:                           4096 (5)
>
>     active_mtu:                       1024 (3)
>
>     sm_lid:                                0
>
>     port_lid:                              0
>
>     port_lmc:                           0x00
>
>     link_layer:                          Ethernet
>
>     # ib_write_bw -a -d mlx5_0
>
>     Couldn't allocate MR
>
>     failed to create mr
>
>     Failed to create MR
>
>     Couldn't create IB resources
>
>     After a reboot, it hangs. We are investigating.
>
>     Thanks,
>
>     Arlin
>
>
>
>
>     _______________________________________________
>
>     ewg mailing list
>
>     ewg at lists.openfabrics.org <mailto:ewg at lists.openfabrics.org>
>
>     http://lists.openfabrics.org/mailman/listinfo/ewg
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/ewg/attachments/20180604/1eec0b20/attachment.html>