[openib-general] [PATCH] osm.mcfdbs - ignore "empty" MLID or switch]
Hal Rosenstock
halr at voltaire.com
Thu Dec 7 05:33:39 PST 2006
On Wed, 2006-12-06 at 08:18, Eitan Zahavi wrote:
> Hi Hal,
>
> Here is the same patch against GIT for your convenience.
>
> Thanks
>
> EZ
>
> The simulated regression caught this:
> The osm.mcfdbs have now the format:
> Switch 0x0002c90000000006
> LID : Out Port(s)
> 0xC000 : 0x003 0x004 0x005 0x006
> 0xC001 :0xC002 :0xC003 :0xC004 :0xC005 :0xC006 :0xC007 :0xC008 :0xC009
> :0xC00A :0xC00B :0xC00C :0xC00D :0xC00E :0xC00F :0xC010 :0xC011 :0xC012
> :0xC013 :0xC014 :0xC015 :0xC016 :0xC017 :0xC018 :0xC019 :0xC01A :0xC01B
> :0xC01C :0xC01D :0xC01E :0xC01F :
>
> Which should probably just be:
> Switch 0x0002c90000000006
> LID : Out Port(s)
> 0xC000 : 0x003 0x004 0x005 0x006
>
> Actually switches that do not have any MCG entry will not be included
> in the dump file.
>
> Signed-off-by: Eitan Zahavi <eitan at mellanox.co.il>
Thanks. Applied.
-- Hal
More information about the general
mailing list