[openib-general] RE: [RFC] [PATCH] mad.c: Add support for switch SMI
Hal Rosenstock
halr at voltaire.com
Mon Feb 13 10:16:38 PST 2006
Suri,
On Mon, 2006-02-13 at 12:45, Suresh Shelvapille wrote:
> Hal:
>
> >From a switch perspective, and from the little testing that I have done with
> different SM,
I don't think it's related to which SM is being used in the subnet.
> I don't know how I can get out port num in the query AH.
When create AH is called, it should be saved. It should be available
from the AV for this AH.
> Because, from what I have observed, the out port num is different depending
> on whether the switch is in the middle or at the end of the query and hence
> one may have to compute this info from either return_path, or init_path or
> from the input port number(physical).
You might be able to do this but it would be ugly.
> Pardon my ignorance, but will I have access to the MAD packet in query_ah?
I don't think this is available through create_ah or query_ah.
-- Hal
> Thanks a lot,
> Suri
>
>
>
>
> >
> > 2. On the send side, the driver must support the optional query_ah verb
> > in order to obtain the send side port number (actual switch external
> > port on which to send the DR SMP).
> >
>
More information about the general
mailing list