[openib-general] ping problem with ammasso cards(iWARP interface)

[Pradipta Kumar Banerjee]

Ravinandan Arakali wrote:
> Also, I am trying to run some of the iwarp bandwidth/latency tests
> (available under directory perftest).
> The first thing to do here is to run opensm. When I run opensm (with debug
You do not need opensm for iwarp.
You will be able to use only rdma_bw and rdma_lat from the iwarp branch or 
rdma_bw from the main trunk. Rest are _ib_only_ .

Thanks,
Pradipta Kumar.

> level 10), I get the following error. Any idea what needs to be done to get
> this working ?
> 
> openfab2:/tmp/ib/src/userspace # opensm  -d 10
> -------------------------------------------------
> OpenSM Rev:openib-1.2.0
> Command Line Arguments:
>  d level = 0xa
>  Log File: /var/log/osm.log
> -------------------------------------------------
> OpenSM Rev:openib-1.2.0
> 
> Using default GUID 0x0
> Error: Could not get port guid
> Exiting SM
> 
> openfab2:/tmp/ib/src/userspace # cat /var/log/osm.log
> Jul 12 08:35:04 718914 [B7E518C0] -> OpenSM Rev:openib-1.2.0
> Jul 12 08:35:04 719111 [0000] -> OpenSM Rev:openib-1.2.0
> 
> Jul 12 08:35:04 721381 [B7E518C0] -> osm_sa_mad_ctrl_unbind: ERR 1A11: No
> previous bind
> Jul 12 08:35:04 721702 [0000] -> Exiting SM
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Pradipta Kumar Banerjee [mailto:bpradip at in.ibm.com]
> Sent: Wednesday, July 12, 2006 10:31 AM
> To: Ravinandan Arakali
> Cc: openib-general at openib.org
> Subject: Re: [openib-general] ping problem with ammasso cards(iWARP
> interface)
> 
> 
> Ravinandan,
>   Do you still see the rping crash?
> 
> Thanks,
> Pradipta Kumar.
> 
> Ravinandan Arakali wrote:
>> Pradipta,
>> Okay, thanks.. Initially, I was not sure since I don't remember non-zero
>> values in /proc/krping. When I re-ran the krping test, I see following
>> output
>> openfab2:~ # cat /proc/krping
>> 1-amso0 891376 55711 891376 55711 1782720 27855 1782784 27856
>>