[openib-general] ping problem with ammasso cards(iWARP interface)

[Steve Wise]

Are you trying to run this over iwarp?  It doesn't need an SM...

For the perftests rdma_lat and rdma_bw in the iwarp branch, use the
--cma flag.

Steve.


On Wed, 2006-07-12 at 16:39 -0700, Ravinandan Arakali wrote:
> Also, I am trying to run some of the iwarp bandwidth/latency tests
> (available under directory perftest).
> The first thing to do here is to run opensm. When I run opensm (with debug
> level 10), I get the following error. Any idea what needs to be done to get
> this working ?
> 
> openfab2:/tmp/ib/src/userspace # opensm  -d 10
> -------------------------------------------------
> OpenSM Rev:openib-1.2.0
> Command Line Arguments:
>  d level = 0xa
>  Log File: /var/log/osm.log
> -------------------------------------------------
> OpenSM Rev:openib-1.2.0
> 
> Using default GUID 0x0
> Error: Could not get port guid
> Exiting SM
> 
> openfab2:/tmp/ib/src/userspace # cat /var/log/osm.log
> Jul 12 08:35:04 718914 [B7E518C0] -> OpenSM Rev:openib-1.2.0
> Jul 12 08:35:04 719111 [0000] -> OpenSM Rev:openib-1.2.0
> 
> Jul 12 08:35:04 721381 [B7E518C0] -> osm_sa_mad_ctrl_unbind: ERR 1A11: No
> previous bind
> Jul 12 08:35:04 721702 [0000] -> Exiting SM
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Pradipta Kumar Banerjee [mailto:bpradip at in.ibm.com]
> Sent: Wednesday, July 12, 2006 10:31 AM
> To: Ravinandan Arakali
> Cc: openib-general at openib.org
> Subject: Re: [openib-general] ping problem with ammasso cards(iWARP
> interface)
> 
> 
> Ravinandan,
>   Do you still see the rping crash?
> 
> Thanks,
> Pradipta Kumar.
> 
> Ravinandan Arakali wrote:
> > Pradipta,
> > Okay, thanks.. Initially, I was not sure since I don't remember non-zero
> > values in /proc/krping. When I re-ran the krping test, I see following
> > output
> > openfab2:~ # cat /proc/krping
> > 1-amso0 891376 55711 891376 55711 1782720 27855 1782784 27856
> >
> > As you mentioned, the RDMA traffic seems to be flowing indeed !
> > Any idea why rping is dumping core ?
> >
> > Has any testing been done using SDP with ammasso cards ?
> >
> > Regards,
> > Ravi
> >
> >
> > -----Original Message-----
> > From: Pradipta Kumar Banerjee [mailto:bpradip at in.ibm.com]
> > Sent: Friday, July 07, 2006 11:20 PM
> > To: Ravinandan Arakali
> > Cc: Leonid. Grossman (E-mail); sivakumar.subramani at neterion.com;
> > openib-general at openib.org
> > Subject: Re: [openib-general] ping problem with ammasso cards(iWARP
> > interface)
> >
> >
> > Ravinandan Arakali wrote:
> >> Pradipta,
> >> Following is the output from gdb after core dump. I have also copy-pasted
> >> the gdb output on client system.
> >>
> >> Attached is the dmesg output when krping test is run in verbose mode.
> >> The ping data on the sender(client) seems okay. The content is shifted
> >> forward by one character for each packet. On receiver, after receiving
> > ping
> >> pkt 9, it seems to jump to pkt no. 1935. Not sure if it's because
> messages
> >> can be lost during writing to /var/log/messages ?
> > krping is indeed working!!...Using 'verbose' allows you to see the ping
> > data.
> > When not using 'verbose' you see only 'send/recv' messages.
> >> -----------------------------------------
> >> (gdb) run -s -vV -C100 -d -a 0.0.0.0 -p 9999
> >> Starting program:
> >> /tmp/ib/src/userspace/librdmacm/examples/.libs/rping -s -vV -C100 -d -a
> >> 0.0.0.0 -p 9999
> >> [Thread debugging using libthread_db enabled]
> >> [New Thread -1210054992 (LWP 3668)]
> >> ipaddr (0.0.0.0)
> >> port 9999
> >> created cm_id 0x804e6e0
> >> [New Thread -1210057824 (LWP 3671)]
> >> rdma_bind_addr successful
> >> rdma_listen
> >> cma_event type 4 cma_id 0x804e968 (child)
> >> child cma 0x804e968
> >>
> >> Program received signal SIGSEGV, Segmentation fault.
> >> [Switching to Thread -1210054992 (LWP 3668)]
> >> rping_setup_qp (cb=0x0, cm_id=0x804e968) at examples/rping.c:514
> >> 514             cb->pd = ibv_alloc_pd(cm_id->verbs);
> >> (gdb) bt
> >> #0  rping_setup_qp (cb=0x0, cm_id=0x804e968) at examples/rping.c:514
> >> #1  0x0804a716 in main (argc=9, argv=Cannot access memory at address 0x6
> >> ) at examples/rping.c:767
> >> (gdb)
> >>
> >> ---------------------------------
> >> (gdb) run -c -vV -C100 -d  -a 17.2.2.102 -p 9999
> >> Starting program:
> >> /tmp/ib/src/userspace/librdmacm/examples/.libs/rping -c -vV -C100 -d  -a
> >> 17.2.2.102 -p 9999
> >> [Thread debugging using libthread_db enabled]
> >> [New Thread 47388824908032 (LWP 4620)]
> >> ipaddr (17.2.2.102)
> >> port 9999
> >> created cm_id 0x506b00
> >> [New Thread 1082132800 (LWP 4623)]
> >> cma_event type 0 cma_id 0x506b00 (parent)
> >> cma_event type 2 cma_id 0x506b00 (parent)
> >> rdma_resolve_addr - rdma_resolve_route successful
> >> created pd 0x506e60
> >> created channel 0x506e80
> >> created cq 0x506ea0
> >> created qp 0x506f40
> >> rping_setup_buffers called on cb 0x505010
> >> allocated & registered buffers...
> >> [New Thread 1090525504 (LWP 4624)]
> >> cq_thread started.
> >>
> >>
> >
> >
> > _______________________________________________
> > openib-general mailing list
> > openib-general at openib.org
> > http://openib.org/mailman/listinfo/openib-general
> >
> > To unsubscribe, please visit
> http://openib.org/mailman/listinfo/openib-general
> >
> >
> 
> 
> _______________________________________________
> openib-general mailing list
> openib-general at openib.org
> http://openib.org/mailman/listinfo/openib-general
> 
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
>