[openib-general] ibdiagnet

[Hal Rosenstock]

Hi Eitan,

On Mon, 2006-10-09 at 12:20, Eitan Zahavi wrote:
> Hi Hal,
> 
> Hal Rosenstock wrote:
> 
> >Hi Eitan,
> >
> >When I run ibdiagnet, I get the following:
> >Loading IBDIAGNET from: /usr/local/lib/ibdiagnet1.0
> >Loading IBDM from: /usr/local/lib/ibdm1.0
> >-W- Topology file is not specified.
> >    Reports regarding cluster links will use direct routes.
> >-W- A few ports of local device are up.
> >    Since port-num was not specified (-p option), port 1 of device 1 will be
> >    used as the local port.
> >
> >Node type 4 is not an IB node type
> >  
> >
> This message is coming from: osm/libvendor/osm_vendor_ibumad.c (opensm 
> vendor lib is used by ibis)
> Why is umad printing this to stdout?

I sent a patch for this to the list.

> >-E- Fail to ibcr_bind.
> >  
> >
> Probably the first device first port is an RNIC ?

Yes.

> Did you try using -i and -p flags?

This works.

> >Node type 4 is an RNIC. Shouldn't these nodes be ignored ?
> >  
> >
> Probably by osm vendor

osm vendor returns an error for these.

-- Hal

> >Also, are IB router nodes supported too by this ?
> >
> >Thanks.
> >
> >-- Hal
> >
> >
> >
> >_______________________________________________
> >openib-general mailing list
> >openib-general at openib.org
> >http://openib.org/mailman/listinfo/openib-general
> >
> >To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
> >  
> >
>