[openib-general] FW: [PATCH fixed] [RFC] IB/srp: enable multiple connections to the same target

Scott Weitzenkamp (sweitzen) sweitzen at cisco.com
Mon Oct 9 15:18:27 PDT 2006


Vlad,

I'd like either an rc8 with this patch, or a pre1 build a day before the
final build so I can test this fix.

Scott Weitzenkamp
SQA and Release Manager
Server Virtualization Business Unit
Cisco Systems
 

> -----Original Message-----
> From: Roland Dreier (rdreier) 
> Sent: Monday, October 09, 2006 10:17 AM
> To: Scott Weitzenkamp (sweitzen)
> Cc: Lakshmanan, Madhu; Ishai Rabinovitz; openib-general at openib.org
> Subject: Re: [openib-general] FW: [PATCH fixed] [RFC] IB/srp: 
> enable multiple connections to the same target
> 
>  > I am also having new problems configuring SRP with OFED 
> 1.1 rc7, I have
>  > asked Roland to take a look on my test networks.
> 
> The problem is that Cisco SRP targets insist on the initiator ID being
> 8 bytes of 0 followed by the initiator node GUID.  The source says
> 
> 	/*
> 	 * Topspin/Cisco SRP targets will reject our login unless we
> 	 * zero out the first 8 bytes of our initiator port ID.  The
> 	 * second 8 bytes must be our local node GUID, but we always
> 	 * use that anyway.
> 	 */
> 
> but with the change to allow userspace-specified initiator IDs, we
> don't use the node GUID anyway.
> 
> I added the following on top of the "multiple connections" patch that
> was queued for 2.6.19.  Can this be put into OFED as well?
> 
>  - R.
> 
> diff --git a/drivers/infiniband/ulp/srp/ib_srp.c 
> b/drivers/infiniband/ulp/srp/ib_srp.c
> index 3bf0c5b..4b09147 100644
> --- a/drivers/infiniband/ulp/srp/ib_srp.c
> +++ b/drivers/infiniband/ulp/srp/ib_srp.c
> @@ -359,15 +359,16 @@ static int srp_send_req(struct srp_targe
>  
>  	/*
>  	 * Topspin/Cisco SRP targets will reject our login unless we
> -	 * zero out the first 8 bytes of our initiator port ID.  The
> -	 * second 8 bytes must be our local node GUID, but we always
> -	 * use that anyway.
> +	 * zero out the first 8 bytes of our initiator port ID and set
> +	 * the second 8 bytes to the local node GUID.
>  	 */
>  	if (topspin_workarounds && !memcmp(&target->ioc_guid, 
> topspin_oui, 3)) {
>  		printk(KERN_DEBUG PFX "Topspin/Cisco initiator 
> port ID workaround "
>  		       "activated for target GUID %016llx\n",
>  		       (unsigned long long) 
> be64_to_cpu(target->ioc_guid));
>  		memset(req->priv.initiator_port_id, 0, 8);
> +		memcpy(req->priv.initiator_port_id + 8,
> +		       &target->srp_host->dev->dev->node_guid, 8);
>  	}
>  
>  	status = ib_send_cm_req(target->cm_id, &req->param);
> 




More information about the general mailing list