[ofa-general] [PATCH 1/2] IB/ipath - fix UD send with immediate
Arthur Jones
arthur.jones at qlogic.com
Tue Jan 15 15:58:13 PST 2008
From: Ralph Campbell <ralph.campbell at qlogic.com>
This fixes a small bug which incorrectly calculated the header size
for UD send with immediate and therefore dropped packets.
Signed-off-by: Ralph Campbell <ralph.campbell at qlogic.com>
---
drivers/infiniband/hw/ipath/ipath_ud.c | 47 ++++++++++++++++----------------
1 files changed, 23 insertions(+), 24 deletions(-)
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 16a2a93..de67eed 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -301,8 +301,6 @@ int ipath_make_ud_req(struct ipath_qp *qp)
/* header size in 32-bit words LRH+BTH+DETH = (8+12+8)/4. */
qp->s_hdrwords = 7;
- if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM)
- qp->s_hdrwords++;
qp->s_cur_size = wqe->length;
qp->s_cur_sge = &qp->s_sge;
qp->s_wqe = wqe;
@@ -327,6 +325,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
ohdr = &qp->s_hdr.u.oth;
}
if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
+ qp->s_hdrwords++;
ohdr->u.ud.imm_data = wqe->wr.imm_data;
bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24;
} else
@@ -455,6 +454,28 @@ void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
}
}
+ /*
+ * The opcode is in the low byte when its in network order
+ * (top byte when in host order).
+ */
+ opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
+ if (qp->ibqp.qp_num > 1 &&
+ opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
+ if (header_in_data) {
+ wc.imm_data = *(__be32 *) data;
+ data += sizeof(__be32);
+ } else
+ wc.imm_data = ohdr->u.ud.imm_data;
+ wc.wc_flags = IB_WC_WITH_IMM;
+ hdrsize += sizeof(u32);
+ } else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
+ wc.imm_data = 0;
+ wc.wc_flags = 0;
+ } else {
+ dev->n_pkt_drops++;
+ goto bail;
+ }
+
/* Get the number of bytes the message was padded by. */
pad = (be32_to_cpu(ohdr->bth[0]) >> 20) & 3;
if (unlikely(tlen < (hdrsize + pad + 4))) {
@@ -482,28 +503,6 @@ void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
wc.byte_len = tlen + sizeof(struct ib_grh);
/*
- * The opcode is in the low byte when its in network order
- * (top byte when in host order).
- */
- opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
- if (qp->ibqp.qp_num > 1 &&
- opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) {
- if (header_in_data) {
- wc.imm_data = *(__be32 *) data;
- data += sizeof(__be32);
- } else
- wc.imm_data = ohdr->u.ud.imm_data;
- wc.wc_flags = IB_WC_WITH_IMM;
- hdrsize += sizeof(u32);
- } else if (opcode == IB_OPCODE_UD_SEND_ONLY) {
- wc.imm_data = 0;
- wc.wc_flags = 0;
- } else {
- dev->n_pkt_drops++;
- goto bail;
- }
-
- /*
* Get the next work request entry to find where to put the data.
*/
if (qp->r_reuse_sge)
More information about the general
mailing list