[ofa-general] ***SPAM*** RE: Problem in IB network without Switch

[lakshmana swamy]

 Hi Jack,

Please find the output of ibstat on both the nodes, .

[root at mattool ~]# /opt/ofed/extras/hca_self_test.ofed 

---- Performing InfiniBand HCA Self Test ----
Number of HCAs Detected ................ 1
PCI Device Check ....................... PASS
Kernel Arch ............................ x86_64
Host Driver Version .................... OFED-1.3 1.3-2.6.18_53.1.14.el5 
Host Driver RPM Check .................. PASS
HCA Type of HCA #0 ..................... Cougar
/opt/ofed/extras/hca_self_test.ofed: line 227: [: =: unary operator expected
HCA Firmware Check ..................... FAIL
    REASON: mismatch HCA #0 firmware detected (found v, need v3.5.917)
Host Driver Initialization ............. PASS
Number of HCA Ports Active ............. 0
Port State of Port #0 on HCA #0 ........ DOWN
Port State of Port #1 on HCA #0 ........ DOWN
Error Counter Check on HCA #0 .......... PASS
Kernel Syslog Check .................... PASS
Node GUID .............................. 00:02:c9:01:08:cd:13:c0
------------------ DONE ---------------------

[root at mattool ~]# 

************ IBSTAT output ******************


[root at mattool ~]# ibstat
CA 'mthca0'
        CA type: MT23108
        Number of ports: 2
        Firmware version: 3.1.0
        Hardware version: a1
        Node GUID: 0x0002c90108cd13c0
        System image GUID: 0x0002c90108cd13c0
        Port 1:
                State: Down
                Physical state: Polling
                Rate: 2
                Base lid: 0
                LMC: 0
                SM lid: 0
                Capability mask: 0x00510a68
                Port GUID: 0x0002c90108cd13c1
        Port 2:
                State: Down
                Physical state: Polling
                Rate: 2
                Base lid: 0
                LMC: 0
                SM lid: 0
                Capability mask: 0x00510a6a
                Port GUID: 0x0002c90108cd13c2
[root at mattool ~]# 

[root at compute-0-0 ~]# ibstat
CA 'mthca0'
        CA type: MT23108
        Number of ports: 2
        Firmware version: 3.0.0
        Hardware version: a1
        Node GUID: 0x0002c9020000114c
        System image GUID: 0x0002c9020000114f
        Port 1:
                State: Down
                Physical state: Polling
                Rate: 2
                Base lid: 0
                LMC: 0
                SM lid: 0
                Capability mask: 0x00110a68
                Port GUID: 0x0002c9020000114d
        Port 2:
                State: Down
                Physical state: Polling
                Rate: 2
                Base lid: 0
                LMC: 0
                SM lid: 0
                Capability mask: 0x00110a68
                Port GUID: 0x0002c9020000114e
[root at compute-0-0 ~]# 

  Thanking you

  laxman




> From: jackm at dev.mellanox.co.il
> To: klakshman03 at hotmail.com
> Subject: Re: Problem in IB network without Switch
> Date: Thu, 26 Feb 2009 13:35:59 +0200
> CC: keshetti.mahesh at gmail.com; general at lists.openfabrics.org
> 
> On Thursday 26 February 2009 12:59, lakshmana swamy wrote:
> 
> Please send me the output of console command:  ibstat
> Maybe you have old FW.
> 
> - Jack
> 
> > 
> >  Hi Jack and Mahesh
> > 
> >  ThanQ for your response.
> > 
> > I have channged the HCA card as well as IB cables also..Ooooops   no use.
> > 
> > 
> >  How can I  perform diagnostics. Please Help me out.
> > 
> > ThanQ
> > 
> >  Laxman
> > 
> > 
> > 
> > > Date: Thu, 26 Feb 2009 14:01:07 +0530
> > > Subject: Re: Problem in IB network without Switch
> > > From: keshetti.mahesh at gmail.com
> > > To: klakshman03 at hotmail.com
> > > CC: general at lists.openfabrics.org
> > > 
> > > Hi,
> > > 
> > > > phys state:      2: Polling
> > > 
> > > On both machines physical state is 'Polling' i.e. the physical
> > > connectivity of the two is not proper. Check the connectivity first.
> > > Only after it becomes
> > > 
> > > phys state:      5: LinkUp
> > > 
> > > you will be able to enable any IB communication on this interface.
> > > 
> > > -Mahesh
> > 
> > _________________________________________________________________
> > Wish to Marry Now? Join MSN Matrimony FREE!
> > http://www.in.msn.com/matrimony

_________________________________________________________________
Chose your Life Partner! Join MSN Matrimony FREE
http://www.in.msn.com/matrimony
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openfabrics.org/pipermail/general/attachments/20090226/4e42b035/attachment.html>